Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/6] ARM: dts: omap3-beagle: Use reset-gpio driver for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: ARM: AM335x: Kernel oops when using EDMA and MMC
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCH 6/6] ARM: dts: omap3-beagle: Make USB host pin naming consistent
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 5/6] ARM: dts: omap3-beagle-xm: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/6] USB: phy: phy-nop: Use RESET controller for managing the reset line
  • From: Roger Quadros <rogerq@xxxxxx>
• Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
  • From: "Arend van Spriel" <arend@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] drivers: Add pinctrl handling for dynamic pin states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/15] usb: phy: omap-usb2: use the new generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/15] ARM: dts: omap: update usb_otg_hs data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/15] ARM: OMAP: USB: Add phy binding information
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/15] PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 02/15] usb: phy: omap-usb2: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 03/15] usb: phy: twl4030: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 04/15] ARM: OMAP: USB: Add phy binding information
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 05/15] ARM: dts: omap: update usb_otg_hs data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 06/15] usb: musb: omap2430: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 08/15] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 09/15] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 10/15] video: exynos_mipi_dsim: Use the generic PHY driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 11/15] exynos4-is: Use the generic MIPI CSIS PHY driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 13/15] phy: Add driver for Exynos DP PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 14/15] video: exynos_dp: remove non-DT support for Exynos Display Port
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 12/15] ARM: Samsung: Remove the MIPI PHY setup code
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 15/15] video: exynos_dp: Use the generic PHY driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 07/15] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• About omap2 mmc host close too long irq in irqaction.
  • From: majianpeng <majianpeng@xxxxxxxxx>
• Re: [PATCH] Documentation: dt: bindings: TI WiLink modules
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] pwm: Update DT bindings to reference pwm.txt for cells documentation
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Add PWM polarity flag macro for DT
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: Use the PWM polarity flags
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] pwm: Use the DT macro directly when parsing PWM DT flags
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] pwm: Add PWM polarity flag macro for DT
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] drivers: Add pinctrl handling for dynamic pin states
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] pinctrl: Allow pinctrl to have multiple active states
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v1 4/4] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 3/4] mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 2/4] mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 1/4] mtd: nand: omap: add support for BCH16_ECC - DT updates
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 0/4] mtd: nand: omap: add support for BCH16_ECC
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 7/9] ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 8/9] ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/9] ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/9] ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/9] ARM: dts: omap5-uevm: document regulator signals used on the actual board
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/9] ARM: dts: omap5-uevm: update and disable unused regulators LDO[28]
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 9/9] ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/9] ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: ARM: AM335x: Kernel oops when using EDMA and MMC
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: ARM: AM335x: Kernel oops when using EDMA and MMC
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCH v2 2/2] ARM: dts: Add AES data and documentation for AM33XX
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] ARM: dts: Add SHAM and AES DT information
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• ARM: AM335x: Kernel oops when using EDMA and MMC
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] pinctrl: rollback check for !dev->pins in pinctrl_pm_select*() APIs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RESEND PATCH V1 4/9] arm: dts: flag omap4430 with needs-cooling for cpu node
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [RESEND PATCH V1 7/9] arm: dts: add omap4430 thermal data
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 6/8] arm: dts: flag omap4430 with needs-cooling for cpu node
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 4/9] arm: dts: flag omap4430 with needs-cooling for cpu node
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 5/8] arm: dts: add omap4430 thermal data
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 7/9] arm: dts: add omap4430 thermal data
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCH v5 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v5 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH v2] ARM: dts: add AM33XX MMC support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/4] improved support for runtime muxing for pinctrl
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/3] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/3] pinctrl: rollback check for !dev->pins in pinctrl_pm_select*() APIs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states for uart3/4
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v5 0/2] TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v5 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v5 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/2] regulator: palmas-pmic: doc: update device tree bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers: phy: add generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [GIT PULL] PHY Framework for 3.12 merge window
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: Add AES data and documentation for AM33XX
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 2/2] ARM: dts: Add AES data and documentation for AM33XX
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH 0/2] ARM: dts: Add SHAM and AES DT information
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: add AM33XX SPI DMA support
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 1/2] ARM: dts: add AM33XX EDMA support
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: Division by zero caused by CCF
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• 3.11-rc1: OMAP3630 boot crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH V2 1/2] regulator: palmas-pmic: doc: fix typo for sleep-mode
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 2/2] regulator: palmas-pmic: doc: remove ti,tstep
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 0/2] regulator: palmas-pmic: doc: update device tree bindings
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Hein Tibosch <hein_tibosch@xxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/2] regulator: palmas-pmic: doc: update device tree bindings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] regulator: palmas-pmic: doc: remove ti,tstep
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] regulator: palmas-pmic: doc: fix typo for sleep-mode
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: "Arend van Spriel" <arend@xxxxxxxxxxxx>
• Re: [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: "Arend van Spriel" <arend@xxxxxxxxxxxx>
• Re: Division by zero caused by CCF
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 2/5] arm: omap5: dts: fix ocp2scp DTS data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 3/5] arm: omap5: dts: add palmas-usb node
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/5] arm: omap5: dts: fix reg property size
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 0/5] ARM: OMAP: DTS/HWMOD/defconfig changes for USB3
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] PHY Framework for 3.12 merge window
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Division by zero caused by CCF
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: dma: fix error return code in omap_system_dma_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 0/2] TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v4 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v4 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v4 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v4 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v4 0/2] TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Hein Tibosch <hein_tibosch@xxxxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Unable to boot with kernel 3.11-rc1 on Panda Board ES Rev B1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] pinctrl-single SoC specific support for v3.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] improved support for runtime muxing for pinctrl
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] improved support for runtime muxing for pinctrl
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] pinctrl: Allow pinctrl to have multiple active states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] drivers: Add pinctrl handling for dynamic pin states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: always send stop after nack
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] i2c-omap: always send stop after nack
  • From: Hein Tibosch <hein_tibosch@xxxxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v1 1/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v1 1/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes
  • From: avinash philip <avinashphilipk@xxxxxxxxx>
• Re: v3.11-rc1 USB regressions
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 8/8] ARM: DRA7: Kconfig: Increase the default gpio count
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: Unable to boot with kernel 3.11-rc1 on Panda Board ES Rev B1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Unable to boot with kernel 3.11-rc1 on Panda Board ES Rev B1
  • From: Jacob Minshall <jacob@xxxxxxxxxxx>
• Re: [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• v3.11-rc1 USB regressions
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] [RFC] usb: dwc3: removal of assumption that usb3 phy always present
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] ASoC: omap: Enable COMPILE_TEST build for DT platforms
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6] usb: dwc3: use extcon fwrk to receive connect/disconnect
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/4] arm: omap5: dts: add palmas-usb node
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/4] arm: omap2plus_defconfig: enable dwc3 and dependencies
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] Enable USB3 for OMAP5
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] arm: omap5: dts: fix reg property size
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] typo fixes (coordiante -> coordinate) in am335x
  • From: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
• [PATCH v1 5/5] mtd: nand: omap: code clean-up and white-space fixes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 4/5] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 3/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 2/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 1/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 0/5] optimize and clean-up of OMAP NAND and ELM driver
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH v2 4/4] ARM: OMAP2+: Provide alias to USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: "Kozaruk, Oleksandr" <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH] ARM: multi_v7: Enabled omap4430 sdp nfsroot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 0/2] ARM: dts: Add USB host support for Beagle-xm
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: "Kozaruk, Oleksandr" <oleksandr.kozaruk@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] arm: omap5: dts: add palmas-usb node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 09/12] ARM: DRA7: hwmod: Create initial DRA7XX SoC data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 4/6] mfd: omap-usb-host: Put pins in IDLE state on suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: multi_v7: Enabled omap4430 sdp nfsroot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 4/6] mfd: omap-usb-host: Put pins in IDLE state on suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 08/12] ARM: DRA7: Reuse the omap44xx_restart and fix the device instance
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 8/8] ARM: DRA7: Kconfig: Increase the default gpio count
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] arm: omap2plus: unidle devices which are about to probe
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• RE: [PATCH v5 0/4] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v5 2/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v5 3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v5 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v5 4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v5 0/4] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH] omapfb: In omapfb_probe return -EPROBE_DEFER when display driver is not loaded yet
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] omapfb: In omapfb_probe return -EPROBE_DEFER when display driver is not loaded yet
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2] N900: add device tree
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH v1 2/2] mfd: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: "Kozaruk, Oleksandr" <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH v1 2/2] mfd: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v1 2/2] mfd: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: "Kozaruk, Oleksandr" <oleksandr.kozaruk@xxxxxx>
• Re: [PATCH v1 2/2] mfd: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [GIT PULL] omap fixes for v3.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH] arm: omap5: dts: add palmas-usb node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCH v1 1/2] PM / AVS: SmartReflex: fix interrupt disable sequence
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 2/2] PM / AVS: SmartReflex: disable spamming interrupts
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 0/2] PM / AVS: interrupt handling fixes
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [PATCH] arm: omap5: dts: fix reg property size
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap5: dts: fix reg property size
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap2plus: unidle devices which are about to probe
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/2] serial: omap: fix wrong context restoration on init
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap2plus: unidle devices which are about to probe
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap2plus: unidle devices which are about to probe
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] arm: omap5: dts: fix reg property size
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] serial: omap: enable PM runtime only when its fully configured
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] serial: omap: fix wrong context restoration on init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Dave Martin <Dave.Martin@xxxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/2] Fix omap serial early crash during hwmod _setup()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM i.MX53: mba53: Fix PWM backlight DT node
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 0/2] Fix omap serial early crash during hwmod _setup()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Fix omap serial early crash during hwmod _setup()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 0/2] TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v3 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v3 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH RESEND] PM / AVS: SmartReflex: remove redundant dev_err call in omap_sr_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: find real users and drivers of rpmsg
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH 04/12] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/3] ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: How to keep DM37x GPIO_162 high during off-mode
  • From: Peter Barada <peter.barada@xxxxxxxxxxx>
• Re: How to keep DM37x GPIO_162 high during off-mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Ивайло Димитров <freemangordon@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: How to keep DM37x GPIO_162 high during off-mode
  • From: Peter Barada <peter.barada@xxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: "Pulukuru, Srinivas" <srinivas.pulukuru@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] pwm: Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM i.MX53: mba53: Fix PWM backlight DT node
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] Add PWM polarity flag macros for DT
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: OMAP2+: twl-common: Remove code for twl6030 and twl6040 setup for legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/2] Fix omap serial early crash during hwmod _setup()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] mmc: omap_hsmmc: use the generic config for omap2plus devices
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] mmc: omap_hsmmc: fix dependency on indirect header inclusion
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 1/4] MFD: Palmas: Check if irq is valid
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/4] MFD: Palmas: Check if irq is valid
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP4+: Get rid of the HWMOD_INIT_NO_IDLE and HWMOD_INIT_NO_RESET flags for uart
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/2] Fix omap serial early crash during hwmod _setup()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 1/4] MFD: Add TPS659038 documentation under Palmas
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 1/4] MFD: Add TPS659038 documentation under Palmas
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] arm: omap2plus: unidle devices which are about to probe
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/4] MFD: Add TPS659038 documentation under Palmas
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] omapfb: In omapfb_probe return -EPROBE_DEFER when display driver is not loaded yet
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH RFC 13/13] ARM: OMAP2+: hwmod: AM43x: new w.r.t AM335x
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH RFC 13/13] ARM: OMAP2+: hwmod: AM43x: new w.r.t AM335x
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 12/13] ARM: OMAP2+: hwmod: type4 sysc
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 11/13] ARM: OMAP2+: AM43x PRCM init
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 10/13] ARM: OMAP2+: AM43x: PRCM kbuild
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 09/13] ARM: OMAP2+: hwmod: AM43x operations
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 08/13] ARM: OMAP2+: hwmod: AMx3: runtime AM43x handling
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 07/13] ARM: OMAP2+: CM: AM43x clockdomain data
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 06/13] ARM: OMAP2+: PM: AM43x powerdomain data
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 05/13] ARM: OMAP2+: PRCM: AM43x definitions
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 04/13] ARM: OMAP2+: CM: cm_inst offset s16->u16
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 03/13] ARM: OMAP2+: hwmod: AMx3: remove common static fields
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 02/13] ARM: OMAP2+: hwmod: AMx3: runtime AM335x handling
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 01/13] ARM: OMAP2+: hwmod: AM335x: prepare for AM43x reuse
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH RFC 00/13] ARM: OMAP2+: AM43x PRCM support
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] mmc: omap_hsmmc: use the generic config for omap2plus devices
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: omap_hsmmc: use the generic config for omap2plus devices
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] ARM: OMAP2+: omap_device: add pinctrl handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 04/12] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Dave Martin <Dave.Martin@xxxxxxx>
• [PATCH 3/6] mfd: omap-usb-host: move initialization to module_init()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/6] mfd: omap-usb-host: Put pins in IDLE state on suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/6] ARM: dts: omap3beagle-xm: Add idle state pins for USB host
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/6] USB: Implement runtime idling and remote wakeup for OMAP EHCI controller
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] mmc: omap_hsmmc: use the generic config for omap2plus devices
  • From: <a-bindra@xxxxxx>
• [PATCH 02/12] drivers/i2c/busses: don't use devm_pinctrl_get_select_default() in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 04/12] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: find real users and drivers of rpmsg
  • From: "Anna, Suman" <s-anna@xxxxxx>
• Re: [GIT PULL] remoteproc fixes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 0/4] pinctrl single support for SoC specific features
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] omapfb: In omapfb_probe return -EPROBE_DEFER when display driver is not loaded yet
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 0/2] arm: omap: RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/4] pinctrl single support for SoC specific features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/4] pinctrl single support for SoC specific features
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH v3] arm: dts: AM43x: Add usb DT nodes for AM4372
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH] ARM: dts: igep00x0: Add pinmux configuration for MCBSP2.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [GIT PULL] omap fixes for v3.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v2 0/2] TWL6030, TWL6032 GPADC driver
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• [PATCH v2 1/2] ARM: dts: twl: Add GPADC data to device tree
  • From: Oleksandr Kozaruk <oleksandr.kozaruk@xxxxxx>
• Re: USB & hwmon on am33xx
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• Re: find real users and drivers of rpmsg
  • From: Barry Song <21cnbao@xxxxxxxxx>
• [PATCH] bq24190_charger: Add support for TI BQ24190 Battery Charger
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: find real users and drivers of rpmsg
  • From: Suman Anna <s-anna@xxxxxx>
• Re: USB & hwmon on am33xx
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: USB & hwmon on am33xx
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• USB & hwmon on am33xx
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: How to keep DM37x GPIO_162 high during off-mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• How to keep DM37x GPIO_162 high during off-mode
  • From: Peter Barada <peter.barada@xxxxxxxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 09/12] ARM: DRA7: hwmod: Create initial DRA7XX SoC data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: Sathya Prakash <a0393677@xxxxxx>
• RE: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• Re: [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 09/12] ARM: DRA7: hwmod: Create initial DRA7XX SoC data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH v2] arm: dts: AM43x: Add usb_otg_hs node
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 1/1] OMAPDSS: Add sil9022 driver
  • From: Sathya Prakash M R <sathyap@xxxxxx>
• Re: [PATCH 2/8] ARM: DRA7: Update SRAM details
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/12] ARM: DRA7: hwmod: Create initial DRA7XX SoC data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/12] ARM: DRA7: hwmod: Create initial DRA7XX SoC data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 12/12] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 02/12] ARM: DRA7: CM: Add DRA7XX register defines
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 11/12] ARM: DRA7: Add the build support in omap2plus
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 05/12] ARM: DRA7: clockdomain: Add DRA7XX data and update header
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 08/12] ARM: DRA7: Reuse the omap44xx_restart and fix the device instance
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 10/12] ARM: DRA7: Enable PM framework initializations
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 06/12] ARM: DRA7: powerdomain: Add DRA7XX data and update header
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 07/12] ARM: DRA7: powerdomain: Handle missing vc/vp
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 04/12] ARM: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 03/12] ARM: DRA7: CM: Add minimal regbit shifts
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 01/12] ARM: DRA7: PRM: Add DRA7XX register definitions
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 00/12] DRA7xx PRCM, hwmod and DT data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 8/8] ARM: DRA7: Kconfig: Increase the default gpio count
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 7/8] ARM: DRA7: board-generic: Add basic DT support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 6/8] ARM: DRA7: Resue the clocksource, clockevent support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 4/8] ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 5/8] ARM: DRA7: Reuse io tables and add a new .init_early
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/8] ARM: DRA7: Update SRAM details
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 3/8] ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/8] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/8] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] Add support for Newflow NanoBone board
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC/PATCH 1/3] driver: spi: Modify core to compute the message length
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC/PATCH 3/3] driver: spi: Add quad spi read support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: find real users and drivers of rpmsg
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 1/3] driver: spi: Modify core to compute the message length
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [RFC/PATCH 3/3] driver: spi: Add quad spi read support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 2/3] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 0/3] spi changes and ti quad spi controller.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH] musb: omap: Fix: pass all the resources to musb core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/5] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/4] usb: musb: omap: use the new API to get PHY reference by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/4] usb: phy: add a new API to get PHY ref by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 1/5] usb: musb: dsps: enable dual instance support for am33xx platform
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 3/5] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode
  • From: Felipe Balbi <balbi@xxxxxx>
• find real users and drivers of rpmsg
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: omap_hsmmc: add PSTATE to debugfs regs_show.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/3] mmc: omap_hsmmc: debugfs entries for GPIO mode.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] ARM: DRA7: clockdomain data: add init file for dra7
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP5: clockdomain data: add init file for omap54xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: dts: AM43x: Add usb_otg_hs node
  • From: George Cherian <george.cherian@xxxxxx>
• RE: [PATCH v4 2/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: dts: AM43x: Add usb_otg_hs node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: debugging options (was: Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: igep00x0: Add pinmux configuration for MCBSP2.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH] ARM: dts: igep00x0: Add pinmux configuration for MCBSP2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.10-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 1/2] ARM: OMAP2+: hwmod: rt address space index for DT
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: [PATCH] [RFC] usb: dwc3: removal of assumption that usb3 phy always present
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: OMAP baseline test results for v3.10-rc6
  • From: Tom Rini <trini@xxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/5] musb: musb: dsps: remove instances variable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/5] usb: musb: dsps: remove the hardcoded phy pieces
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/5] usb: phy: phy-nop: add support for am335x PHY
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• musb: dsps: make it work with two instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP3: PRM/CM: Cleanup unused header
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/4] ARM: OMAP2: PRM/CM: Cleanup unused header
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/4] OMAP2+: Cleanup PRM and CM regbit headers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [RFC 0/4] Cleanup PRM and CM regbit headers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.10-rc6
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC 0/4] Cleanup PRM and CM regbit headers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] N900: add device tree
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] N900: add device tree
  • From: Pavel Machek <pavel@xxxxxx>
• Re: OMAP baseline test results for v3.10-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.10-rc7
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.10-rc7
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] N900: add device tree
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: OMAP baseline test results for v3.10-rc7
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 0/4] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [RFC 0/4] Cleanup PRM and CM regbit headers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 14/22] arm/am33xx: add TSC/ADC mfd device support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/22] arm/am33xx: add TSC/ADC mfd device support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] ARM: OMAP: fix return value check in omap_device_build_from_dt()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Boot hang regression 3.10.0-rc4 -> 3.10.0
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [RFC 0/4] Cleanup PRM and CM regbit headers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: configs: Enable TI_EDMA in omap2plus_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [-next PATCH 0/2] ARM: OMAP5: fix build breakage due to SCU usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] ARM: OMAP: build mach-omap code only if needed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 0/4] Cleanup PRM and CM regbit headers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] ARM: OMAP2+: devices: remove duplicated include from devices.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: Enable Cortex A15 errata 798181
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: timer: initialize before using oh_name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] N900: enable N900-specific drivers even if device tree is enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Cocci spatch "ptr_ret.spatch"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 5/6] arm: omap2plus_defconfig: enable TI bandgap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove obsolete Makefile line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 01/22] mfd/ti_am335x_tscadc: remove regmap
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable
  • From: Sekhar Nori <nsekhar@xxxxxx>