On Friday 19 July 2013 06:04 PM, George Cherian wrote:
> Remove usb phy control module access from platform glue.
> The same is now done using amxxxx phy driver and phy-omap-control.
> Adapt the driver to the split dt nodes.
This patch should be split.
>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> Signed-off-by: George Cherian <george.cherian@xxxxxx>
> ---
> drivers/usb/musb/musb_dsps.c | 150 ++++++++++++++++---------------------------
> 1 file changed, 55 insertions(+), 95 deletions(-)
>
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 41f135a..6bec458 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -43,6 +43,7 @@
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
> #include "musb_core.h"
>
> @@ -110,8 +111,6 @@ struct dsps_musb_wrapper {
> /* miscellaneous stuff */
> u32 musb_core_offset;
> u8 poll_seconds;
> - /* number of musb instances */
> - u8 instances;
> };
>
> /**
> @@ -123,49 +122,11 @@ struct dsps_glue {
> const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
> struct timer_list timer[2]; /* otg_workaround timer */
> unsigned long last_timer[2]; /* last timer data for each instance */
> - u32 __iomem *usb_ctrl[2];
> };
>
> -#define DSPS_AM33XX_CONTROL_MODULE_PHYS_0 0x44e10620
> -#define DSPS_AM33XX_CONTROL_MODULE_PHYS_1 0x44e10628
> +#define glue_to_musb(g, i) platform_get_drvdata(g->musb[i])
>
> -static const resource_size_t dsps_control_module_phys[] = {
> - DSPS_AM33XX_CONTROL_MODULE_PHYS_0,
> - DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
> -};
> -
> -#define USBPHY_CM_PWRDN (1 << 0)
> -#define USBPHY_OTG_PWRDN (1 << 1)
> -#define USBPHY_OTGVDET_EN (1 << 19)
> -#define USBPHY_OTGSESSEND_EN (1 << 20)
> -
> -/**
> - * musb_dsps_phy_control - phy on/off
> - * @glue: struct dsps_glue *
> - * @id: musb instance
> - * @on: flag for phy to be switched on or off
> - *
> - * This is to enable the PHY using usb_ctrl register in system control
> - * module space.
> - *
> - * XXX: This function will be removed once we have a seperate driver for
> - * control module
> - */
> -static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on)
> -{
> - u32 usbphycfg;
> -
> - usbphycfg = readl(glue->usb_ctrl[id]);
> -
> - if (on) {
> - usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
> - usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
> - } else {
> - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
> - }
>
> - writel(usbphycfg, glue->usb_ctrl[id]);
> -}
> /**
> * dsps_musb_enable - enable interrupts
> */
> @@ -411,16 +372,28 @@ static int dsps_musb_init(struct musb *musb)
> void __iomem *reg_base = musb->ctrl_base;
> u32 rev, val;
> int status;
> + char phyname[12];
>
> /* mentor core register starts at offset of 0x400 from musb base */
> musb->mregs += wrp->musb_core_offset;
>
> - /* NOP driver needs change if supporting dual instance */
> - usb_nop_xceiv_register();
> - musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
> + snprintf(phyname , 12, "am335x-usb%d", pdev->id);
> +
> + if (dev->of_node) {
> + musb->phy = devm_phy_get(dev, phyname);
> + musb->xceiv = devm_usb_get_phy_by_phandle(dev,
> + "phys", 0);
> + } else {
> + musb->phy = devm_phy_get(dev, musb->phy_label);
> + musb->xceiv = devm_usb_get_phy_dev(dev, pdev->id);
> + }
> +
> if (IS_ERR_OR_NULL(musb->xceiv))
> return -EPROBE_DEFER;
>
> + if (IS_ERR_OR_NULL(musb->phy))
> + return -EPROBE_DEFER;
> +
> /* Returns zero if e.g. not clocked */
> rev = dsps_readl(reg_base, wrp->revision);
> if (!rev) {
> @@ -434,7 +407,8 @@ static int dsps_musb_init(struct musb *musb)
> dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
>
> /* Start the on-chip PHY and its PLL. */
> - musb_dsps_phy_control(glue, pdev->id, 1);
> + phy_init(musb->phy);
> + phy_power_on(musb->phy);
>
> musb->isr = dsps_interrupt;
>
> @@ -448,8 +422,7 @@ static int dsps_musb_init(struct musb *musb)
>
> return 0;
> err0:
> - usb_put_phy(musb->xceiv);
> - usb_nop_xceiv_unregister();
> + devm_phy_put(dev->parent, musb->phy);
> return status;
> }
>
> @@ -462,11 +435,8 @@ static int dsps_musb_exit(struct musb *musb)
> del_timer_sync(&glue->timer[pdev->id]);
>
> /* Shutdown the on-chip PHY and its PLL. */
> - musb_dsps_phy_control(glue, pdev->id, 0);
> -
> - /* NOP driver needs change if supporting dual instance */
> - usb_put_phy(musb->xceiv);
> - usb_nop_xceiv_unregister();
> + phy_power_off(musb->phy);
> + phy_exit(musb->phy);
>
> return 0;
> }
> @@ -483,49 +453,34 @@ static struct musb_platform_ops dsps_ops = {
>
> static u64 musb_dmamask = DMA_BIT_MASK(32);
>
> -static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
> +static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id,
> + struct device_node *np)
> {
> struct device *dev = glue->dev;
> struct platform_device *pdev = to_platform_device(dev);
> struct musb_hdrc_platform_data *pdata = dev->platform_data;
> - struct device_node *np = pdev->dev.of_node;
> struct musb_hdrc_config *config;
> struct platform_device *musb;
> - struct resource *res;
> struct resource resources[2];
> char res_name[11];
res_name should be removed.
> int ret;
>
> - resources[0].start = dsps_control_module_phys[id];
> - resources[0].end = resources[0].start + SZ_4 - 1;
> - resources[0].flags = IORESOURCE_MEM;
> -
> - glue->usb_ctrl[id] = devm_ioremap_resource(&pdev->dev, resources);
> - if (IS_ERR(glue->usb_ctrl[id])) {
> - ret = PTR_ERR(glue->usb_ctrl[id]);
> - goto err0;
> - }
> -
> - /* first resource is for usbss, so start index from 1 */
> - res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1);
> - if (!res) {
> + ret = of_address_to_resource(np, 0, &resources[0]);
> + if (ret) {
> dev_err(dev, "failed to get memory for instance %d\n", id);
> - ret = -ENODEV;
> goto err0;
> }
> - res->parent = NULL;
> - resources[0] = *res;
>
> /* first resource is for usbss, so start index from 1 */
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, id + 1);
> - if (!res) {
> + ret = of_irq_to_resource(np, 0, &resources[1]);
> + if (ret == 0) {
> dev_err(dev, "failed to get irq for instance %d\n", id);
> - ret = -ENODEV;
> + ret = -EINVAL;
> goto err0;
> }
> - res->parent = NULL;
> - resources[1] = *res;
> - resources[1].name = "mc";
> + resources[0].parent = NULL;
> + resources[1].parent = NULL;
What's the significance of setting parent to NULL?
> +
>
> /* allocate the child platform device */
> musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
> @@ -538,6 +493,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
> musb->dev.parent = dev;
> musb->dev.dma_mask = &musb_dmamask;
> musb->dev.coherent_dma_mask = musb_dmamask;
> + musb->dev.of_node = of_node_get(np);
Do you have a corresponding of_node_put?
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
