Hi Rajendra, On Tue, 23 Jul 2013, Rajendra Nayak wrote: > On Tuesday 23 July 2013 01:37 AM, Paul Walmsley wrote: > > On Mon, 22 Jul 2013, Russell King - ARM Linux wrote: > > > >> Bear in mind that I'm almost at the point of not boot-testing anything > >> I sent to Linus because of the uselessness of the SDP4430 board now > >> that it's DT only - the only platform which boot-tests anything I send > >> is the 3430LDP board now. If people care about that, maybe they can > >> assist with sorting out the issues I've raised on these lists about > >> the SDP4430 - and why the SDP4430 build remains disabled in my build > >> and boot system. > > > > I understand completely... > > > >> Looking at the boot log, it just stops after uboot hands over control. > >> With the lack of output from the decompressor, it's not possible to > >> tell whether it's a decompressor problem or a kernel problem. > >> > >> I think you need to turn on the LL_DEBUG option, select the appropriate > >> output option, and also get the decompressor to use the kernel's debug > >> io functions to output it's stuff (I think the option is DEBUG_UNCOMPRESS). > > > > OK, will dig deeper here at the next opportunity. > > Paul, I can take a look at the 4430sdp issue. Are you also seeing this also on > 2430sdp as the subject says, or was that a typo? Thanks for the offer. The issue that I'm seeing is on the 2430SDP in my testbed. I don't have a 4430SDP, so you might consider touching base with rmk for that one. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
