clk-44xx.c now contains the clock init functionality for omap4, including
DT clock registration and adding of static clkdev entries.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
drivers/clk/omap/clk-44xx.c | 118 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
create mode 100644 drivers/clk/omap/clk-44xx.c
diff --git a/drivers/clk/omap/clk-44xx.c b/drivers/clk/omap/clk-44xx.c
new file mode 100644
index 0000000..cc12134
--- /dev/null
+++ b/drivers/clk/omap/clk-44xx.c
@@ -0,0 +1,118 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul@xxxxxxxxx)
+ * Rajendra Nayak (rnayak@xxxxxx)
+ * Benoit Cousson (b-cousson@xxxxxx)
+ * Mike Turquette (mturquette@xxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of the ES1 clocks have been removed/changed; once support
+ * is added for discriminating clocks by ES level, these should be added back
+ * in.
+ *
+ * XXX All of the remaining MODULEMODE clock nodes should be removed
+ * once the drivers are updated to use pm_runtime or to use the appropriate
+ * upstream clock node for rate/parent selection.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk/omap.h>
+
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
+static struct omap_dt_clk omap44xx_clks[] = {
+ DT_CLK("smp_twd", NULL, "mpu_periphclk"),
+ DT_CLK("omapdss_dss", "ick", "dss_fck"),
+ DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
+ DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
+ DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
+ DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
+ DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+ /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
+ DT_CLK("omap_timer.1", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.2", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.3", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.4", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.9", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.10", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.11", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("omap_timer.5", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("omap_timer.6", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("omap_timer.7", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("omap_timer.8", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("4a318000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK("40138000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("4013a000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("4013c000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK("4013e000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+ DT_CLK(NULL, "cpufreq_ck", "dpll_mpu_ck"),
+};
+
+int __init omap4xxx_clk_init(void)
+{
+ int rc;
+ struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
+
+ /* FIXME register clocks from DT first */
+ dt_omap_clk_init();
+
+ omap_dt_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
+
+ omap2_clk_disable_autoidle_all();
+
+ /*
+ * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+ * state when turning the ABE clock domain. Workaround this by
+ * locking the ABE DPLL on boot.
+ * Lock the ABE DPLL in any case to avoid issues with audio.
+ */
+ abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
+ sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+ rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+ abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+ if (!rc)
+ rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+ rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+ return 0;
+}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
