Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v2 7/9] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 6/9] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 5/9] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 2/9] usb: phy: nop: Don't use regulator framework for RESET line
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 0/9] USB: phy: phy-nop: Manage RESET GPIO in the driver
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 0/2] TWL6030, TWL6032 GPADC driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• [PATCH] OMAP: serial: Remove incorrect disabling of IER interrupt
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• dma_unmap causing issues with __get_free_pages
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 00/10] crypto: omap-aes: DMA and PIO mode improvements
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Dmitry Kasatkin <d.kasatkin@xxxxxxxxxxx>
• Re: [PATCH 00/10] crypto: omap-aes: DMA and PIO mode improvements
  • From: Dmitry Kasatkin <d.kasatkin@xxxxxxxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 00/10] crypto: omap-aes: DMA and PIO mode improvements
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 03/10] crypto: omap-aes: Populate number of SG elements
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 02/10] crypto: omap-aes: Add useful debug macros
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 08/10] crypto: omap-aes: PIO mode: Add IRQ handler and walk SGs
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 07/10] crypto: omap-aes: Add IRQ info and helper macros
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 09/10] crypto: omap-aes: PIO mode: platform data for OMAP4 and trigger it
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 10/10] crypto: omap-aes: Switch to PIO mode in probe function
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 05/10] crypto: omap-aes: Sync SG before DMA operation
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 00/10] crypto: omap-aes: DMA and PIO mode improvements
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 04/10] crypto: omap-aes: Simplify DMA usage by using direct SGs
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 01/10] crypto: scatterwalk: Add support for calculating number of SG elements
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 06/10] crypto: omap-aes: Remove previously used intermediate buffers
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v4 1/4] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH v4 2/4] ARM: dts: add AM33XX vdd core opp50 suspend for Beaglebone.
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH v8 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/4] pinctrl: Add support for additional dynamic states
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• OMAP baseline test results for v3.11-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.11-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v3] Documentation: dt: bindings: TI WiLink modules
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3] arm: dts: AM43x: Add usb DT nodes for AM4372
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v3] arm: dts: AM43x: Add usb DT nodes for AM4372
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 9/9] ARM: dts: omap3-beagle-xm: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/9] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/9] usb: phy: nop: Add gpio_reset to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 6/9] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 7/9] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 8/9] ARM: dts: omap3-beagle: Make USB host pin naming consistent
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/9] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/9] USB: phy: phy-nop: Manage RESET GPIO in the driver
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 0/2] omap4/twl6030: typical connection to omap4 as a separate dtsi file
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 0/3] DWC3 USB support for Qualcomm platform
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Add support to parse 'main_clk' info from DT
  • From: "menon.nishanth@xxxxxxxxx" <menon.nishanth@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH v2] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v2 0/4] Add phy support for AM335X platform using Generic PHy framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v3] OMAP: add RS485 support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCH] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 0/2] ARM: dts: AM33XX: node definition cleanups
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v4 1/4] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support
  • From: Gururaja Hebbar <gururaja.hebbar@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH 0/29] simplify use of devm_ioremap_resource
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 29/29] usb: dwc3: omap: simplify use of devm_ioremap_resource
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [RFC] OMAP: allow GPIO pin to enable/disable external UART driver chip.
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 2/4] ARM: dts: add AM33XX vdd core opp50 suspend for Beaglebone.
  • From: Gururaja Hebbar <gururaja.hebbar@xxxxxx>
• Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL] DRA7xx core support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL, FOR LINUX-OMAP] usb: nop phy rename
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 0/2] omap4/twl6030: typical connection to omap4 as a separate dtsi file
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• [PATCH v2 2/2] arm: dts: omap4: configure connection to PMIC on Variscite's SOM
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• [PATCH v2 1/2] arm: dts: twl6030: typical connection to omap4 as a separate dtsi file
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap4-panda: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/4] ARM: dts: omap5-uevm: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap4-panda: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/4] Add USB Host support for OMAP5 uevm
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: fix string error in compatible property
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 12/22] ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: omap5: update omap-control-usb node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/7] phy: omap-usb: Support multiple instances and new types
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 12/22] ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 12/22] ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] misc: Add crossbar driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
• [PATCH v4 1/4] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [PATCH v4 4/4] ARM: dts: AM33XX vdd core opp50 suspend for EVM-SK
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [PATCH v4 3/4] ARM: dts: add AM33XX vdd core opp50 suspend for AM335X GP EVM.
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [PATCH v4 2/4] ARM: dts: add AM33XX vdd core opp50 suspend for Beaglebone.
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC] OMAP: allow GPIO pin to enable/disable external UART driver chip.
  • From: Andrew Ruder <andy@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: Platform device tester - Allow removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [no subject]
  • From: Unknown
• [no subject]
  • From: Unknown
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 12/22] ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 13/22] ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 14/22] ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 15/22] ARM: dts: Remove '0x's from OMAP3 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 16/22] ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 17/22] ARM: dts: Remove '0x's from OMAP4 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 18/22] ARM: dts: Remove '0x's from OMAP5 DTS file
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv9 1/2] drivers: spi: Add qspi flash controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/5 v2] drivers/gpio/gpio-omap.c: convert comma to semicolon
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] arm: omap5: dts: split SMPS10 dt node
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] arm: omap5: dts: split SMPS10 dt node
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v3] N900: add device tree
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH v3] N900: add device tree
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/3] misc: Add crossbar driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/3] misc: Add crossbar driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] arm: omap5: dts: split SMPS10 dt node
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: RX51: kernel message spam from CPUfreq driver
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: DTS: AM33XX: Add PMU support
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: AM33XX: node definition cleanups
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCHv5 22/31] CLK: TI: add interface clock support for OMAP3
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH v2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv5 18/31] CLK: DT: add support for set-rate-parent flag
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCHv5 16/31] CLK: TI: DRA7: Add APLL support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCHv5 05/31] CLK: TI: add support for OMAP gate clock
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCHv5 02/31] CLK: TI: Add DPLL clock support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 01/15] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Pandaboard: DT Boot fails when initramfs is loaded
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/3] misc: Add crossbar driver
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 1/2] usb: musb: convert to devm_* to allocate resources
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] usb: musb: pass on all the required resources from glue to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/3] misc: Add crossbar driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/13] ARM: OMAP2+: AM43x PRCM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 00/22] OMAPDSS: DT support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [GIT PULL] DRA7xx core support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH 1/5 v2] drivers/gpio/gpio-omap.c: convert comma to semicolon
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 2/2] arm: omap5: dts: add palmas-usb node
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 08/12] dma: edma: Add one more required slot to MAX slots
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3 07/12] dma: edma: Add function to dump a PaRAM set from PaRAM
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3 09/12] dma: edma: Implement multiple linked sets for continuity
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3 01/12] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3 01/12] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3 01/12] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v3] arm: omap5: dts: add palmas-usb node
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2] serial: OMAP: add RS485 support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v3 08/12] dma: edma: Add one more required slot to MAX slots
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCHv3 1/9] memory: emif: Move EMIF register defines to include/linux/
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 1/9] memory: emif: Move EMIF register defines to include/linux/
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] drivers/gpio/gpio-omap.c: convert comma to semicolon
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Benoit Cousson <benoit.cousson@xxxxxxxxx>
• Re: [PATCH v3 08/12] dma: edma: Add one more required slot to MAX slots
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 09/12] dma: edma: Implement multiple linked sets for continuity
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: Pandaboard: DT Boot fails when initramfs is loaded
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 8/8] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [net-next PATCH 1/1] drivers: net: cpsw: Add support for new CPSW IP version present in AM43xx SoC
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [GIT PULL] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3 08/12] dma: edma: Add one more required slot to MAX slots
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 07/12] dma: edma: Add function to dump a PaRAM set from PaRAM
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• [PATCH v3] arm: omap5: dts: add palmas-usb node
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] arm: omap5: dts: split SMPS10 dt node
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP2+: Add SSI driver configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: HSI: Introduce OMAP SSI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/9] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: hwmod-data: Add SSI information
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/9] DRA7xx core support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 03/12] dma: edma: remove limits on number of slots
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 01/12] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM4372: add few nodes
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH v3 0/9] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: RX51: kernel message spam from CPUfreq driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3 02/12] ARM: edma: Don't clear EMR of channel in edma_stop
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 02/12] ARM: edma: Don't clear EMR of channel in edma_stop
  • From: Joel Fernandes <agnel.joel@xxxxxxxxx>
• Re: [PATCH v3 02/12] ARM: edma: Don't clear EMR of channel in edma_stop
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [GIT PULL] drop unused omap defines for v3.12 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v3 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Ивайло Димитров <freemangordon@xxxxxx>
• [PATCH 3/3] ARM: OMAP2+: Add SSI driver configuration
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP2+: HSI: Introduce OMAP SSI driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/3] ARM: OMAP2+: hwmod-data: Add SSI information
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [RFC PATCH 0/3] OMAP SSI driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• RX51: kernel message spam from CPUfreq driver
  • From: Sebastian Reichel <sre@xxxxxxxx>
• [PATCH v2] OMAP: add RS485 support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Pavel Machek <pavel@xxxxxx>
• Pandaboard: DT Boot fails when initramfs is loaded
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2] Add support for Newflow NanoBone board
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [RFC] OMAP: add RS485 support
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCH 1/1] MAINTAINERS: update Benoît Cousson email address
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH] Add support for Newflow NanoBone board
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH] Add support for Newflow NanoBone board
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• OMAP device tree maintainance (was Re: [PATCH v2] N900: add device tree)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH 2/2] ARM: dts: AM33XX: don't redefine OCP bus and device nodes
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: AM33XX: use pinmux node defined in included file
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 0/2] ARM: dts: AM33XX: node definition cleanups
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers/gpio/gpio-omap.c: convert comma to semicolon
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 1/5] drivers/gpio/gpio-omap.c: convert comma to semicolon
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH] mmc:omap change driver to use dev_pm_ops infrastructure
  • From: Shuah Khan <shuah.kh@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM4372: add few nodes
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/2] ARM: dts: AM4372: cpu(s) node per latest binding
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [RFC] OMAP: allow GPIO pin to enable/disable external UART driver chip.
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add phy support for AM335X platform using Generic PHy framework
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] N900: add device tree
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 3/5] omap: Properly handle resources for omap_devices
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/5] omap: Properly handle resources for omap_devices
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 3/5] omap: Properly handle resources for omap_devices
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] crypto: omap-sham: Add OMAP5/AM43XX SHAM Support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 3/5] omap: Properly handle resources for omap_devices
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [GIT PULL, FOR LINUX-OMAP] usb: nop phy rename
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/21] ARM: OMAP2+: use new display drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC PATCH v2 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 0/3] DWC3 USB support for Qualcomm platform
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Ti-st suspend/resume hooks
  • From: Vikram Narayanan <vikram186@xxxxxxxxx>
• Re: [PATCH] ARM: omap2: Use a consistent AM33XX SoC option description
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Question about SMP boot on OMAP5432
  • From: Chen Baozi <baozich@xxxxxxxxx>
• [RFC 08/22] OMAPDSS: Add DT support to DSS, DISPC, DPI, HDMI, VENC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 15/22] ARM: omap3-beagle.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 12/22] ARM: omap4-panda.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 19/22] OMAPDSS: encoder-tpd12s015: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 22/22] OMAPDSS: connector-analog-tv: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 21/22] OMAPDSS: panel-dpi: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 17/22] OMAPDSS: encoder-tfp410: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 20/22] OMAPDSS: hdmi-connector: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 18/22] OMAPDSS: connector-dvi: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 16/22] OMAPDSS: panel-dsi-cm: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 13/22] ARM: omap4-sdp.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 14/22] ARM: omap3-tobi.dts: add lcd (TEST)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 09/22] OMAPDSS: Add DT support to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 06/22] OMAPFB: clean up default display search
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 07/22] OMAPFB: search for default display with DT alias
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 11/22] ARM: omap4.dtsi: add omapdss information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 10/22] ARM: omap3.dtsi: add omapdss information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 03/22] ARM: OMAP2+: add omapdss_init_of()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 05/22] OMAPDSS: get dssdev->alias from DT alias
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 04/22] OMAPDSS: if dssdev->name==NULL, use alias
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 02/22] OMAPDSS: remove DT hacks for regulators
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 00/22] OMAPDSS: DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC 01/22] ARM: OMAP: remove DSS DT hack
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: ARM: AM335x: Reboot broken in 3.11
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH 0/6] hwrng: OMAP: Updates for OMAP RNG module
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: clock: Lock PLLs in the right sequence
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: clock: Lock PLLs in the right sequence
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 6/6] experimental: arm: dts: dra7xx: Add a DT node for VPE
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: omap2: Use a consistent AM33XX SoC option description
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• Re: How to use gpio-omap as interrupt-controller
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• How to use gpio-omap as interrupt-controller
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 9/9] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCHv3 7/9] ARM: OMAP: omap_device: Add APIs to enable and idle hwmods
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• ARM: AM335x: Reboot broken in 3.11
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCHv3 3/9] ARM: OMAP: DTB: Update IRQ data for WKUP_M3
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 1/9] memory: emif: Move EMIF register defines to include/linux/
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 02/12] ARM: edma: Don't clear EMR of channel in edma_stop
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP2430 SDP boot broken after Linus' rmk merge
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH] ARM: OMAP4: clock: Lock PLLs in the right sequence
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 4/5] omap: Avoid crashes in the case of hwmod misconfiguration
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] omap: Properly handle resources for omap_devices
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCHv3 9/9] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 7/9] ARM: OMAP: omap_device: Add APIs to enable and idle hwmods
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: OMAP2430 SDP boot broken after Linus' rmk merge
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 3/9] ARM: OMAP: DTB: Update IRQ data for WKUP_M3
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCHv3 1/9] memory: emif: Move EMIF register defines to include/linux/
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] bq24190_charger: Add support for TI BQ24190 Battery Charger
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH] bq24190_charger: Add support for TI BQ24190 Battery Charger
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: OMAP2430 SDP boot broken after Linus' rmk merge
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Matt Porter <matt.porter@xxxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH 02/12] drivers/i2c/busses: don't use devm_pinctrl_get_select_default() in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH] ARM: dts: omap3-beagle-xm: fix string error in compatible property
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• [PATCH] ARM: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  • From: Chen Baozi <baozich@xxxxxxxxx>
• Re: [PATCH] ARM: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  • From: Chen Baozi <baozich@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
  • From: Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] drop unused omap defines for v3.12 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH V2] mmc: omap_hsmmc: Fix sleep too long in ISR context.
  • From: majianpeng <majianpeng@xxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Andy Green <andy.green@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: rx51: change musb mode to OTG
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• v3.11-rc4: OMAP1/Amstrad Delta (E3) crash
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCHv3 8/8] ARM: dts: AM33xx: Add mailbox node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 6/8] mailbox/omap: remove omap_mbox_type_t from mailbox ops
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 7/8] mailbox/omap: add code to support the wkupm3 operations
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 5/8] ARM: dts: OMAP5: Add mailbox dt node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 3/8] ARM: dts: OMAP2+: Add mailbox nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 4/8] ARM: OMAP5: hwmod data: Add mailbox data
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 1/8] mailbox/omap: add a parent structure common to all mboxes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 0/8] omap mailbox dt
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: AM33xx: Add RNG node
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCHv3 1/9] memory: emif: Move EMIF register defines to include/linux/
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 8/9] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 4/9] ARM: OMAP2+: AM33XX: Reserve memory to comply with EMIF spec
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 3/9] ARM: OMAP: DTB: Update IRQ data for WKUP_M3
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 5/9] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 9/9] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 6/9] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 7/9] ARM: OMAP: omap_device: Add APIs to enable and idle hwmods
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 2/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 1/2] ARM: omap2: fix musb usage for n8x0
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 0/2] ARM: OMAP: fix USB regression on Nokia boards
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 2/2] ARM: OMAP: rx51: change musb mode to OTG
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: Reg: USB: ehci-omap: Suspend the controller during idle.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCHv9 1/2] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: Reg: USB: ehci-omap: Suspend the controller during idle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 4/7] usb: musb: omap2430: Don't use omap_get_control_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/7] usb: phy: omap: Add new PHY types and remove omap_control_usb3_phy_power()
  • From: Roger Quadros <rogerq@xxxxxx>
• Reg: USB: ehci-omap: Suspend the controller during idle.
  • From: Bharathraj Nagaraju <bharathraj.nagaraju@xxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• Re: [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC 0/2] DWC3 USB support for Qualcomm platform
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: phy: omap-usb2: Don't use omap_get_control_dev()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 5/7] usb: phy: omap: get rid of omap_get_control_dev()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 4/7] usb: musb: omap2430: Don't use omap_get_control_dev()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/7] usb: phy: omap-usb3: Don't use omap_get_control_dev()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/7] usb: phy: omap: Add new PHY types and remove omap_control_usb3_phy_power()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] pdev: Fix platform device resource linking
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm: omap: Proper cleanups for omap_device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 2/3] ARM: AM33xx: clock: Add RNG clock data
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 1/3] ARM: AM33xx: hwmod: Add RNG module data
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/3] ARM: AM33xx: Add RNG module data
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [net-next PATCH v2 1/1] drivers: net: cpsw: Add support for new CPSW IP version
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v3 03/12] dma: edma: remove limits on number of slots
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 09/12] dma: edma: Implement multiple linked sets for continuity
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 00/12] edma: Add support for SG lists of any length
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH RESEND] PM / AVS: SmartReflex: remove redundant dev_err call in omap_sr_probe()
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v1 0/2] PM / AVS: interrupt handling fixes
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH v3 07/12] dma: edma: Add function to dump a PaRAM set from PaRAM
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 02/12] ARM: edma: Don't clear EMR of channel in edma_stop
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 10/12] dma: edma: Check if MAX_NR_SG is even in prep function
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 08/12] dma: edma: Add one more required slot to MAX slots
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 01/12] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 05/12] ARM: edma: Add function to enable interrupt for a PaRAM slot
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 06/12] ARM: edma: Add pr_debug in edma_link
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 12/12] dma: edma: Return if nothing left todo in edma_execute
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 04/12] dma: edma: Write out and handle MAX_NR_SG at a given time
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH v3 11/12] dma: edma: Keep tracking of Pending interrupts (pending_acks)
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 4/4] ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: DTS: SAMA5: Add PMU support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  • From: Chen Baozi <baozich@xxxxxxxxx>
• [PATCH 1/6] hwrng: OMAP: Use module_platform_driver macro
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 3/6] hwrng: OMAP: Remove duplicated function call
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/6] hwrng: OMAP: Updates for OMAP RNG module
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 6/6] hwrng: OMAP: Add OMAP4 TRNG support
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 2/6] hwrng: OMAP: Convert to devm_kzalloc()
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 5/6] ARM: OMAP2+: Only manually add hwmod data when DT not used.
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 4/6] hwrng: OMAP: Add device tree support
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v3 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Dave Martin <Dave.Martin@xxxxxxx>
• Re: [PATCH 2/6] v4l: ti-vpe: Add helpers for creating VPDMA descriptors
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/6] v4l: ti-vpe: Add helpers for creating VPDMA descriptors
  • From: Archit Taneja <archit@xxxxxx>
• [net-next PATCH v2 1/1] drivers: net: cpsw: Add support for new CPSW IP version
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 3/4] dts: dra7-evm: add USB support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] am33xx-restart: trigger warm reset on omap2+ boards
  • From: ujhelyi.m@xxxxxxxxx
• Re: [PATCH 3/6] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/6] v4l: ti-vpe: Add helpers for creating VPDMA descriptors
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/4] dts: dra7-evm: add USB support
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 1/6] v4l: ti-vpe: Create a vpdma helper library
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/4] dts: dra7-evm: add USB support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] ARM: dts: dra7: Add USB related nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv5 07/31] CLK: TI: add omap4 clock init file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] omapfb: In omapfb_probe return -EPROBE_DEFER when display driver is not loaded yet
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM4372: add few nodes
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM4372: add few nodes
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod fixes for v3.11-rc
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod fixes for v3.11-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod fixes for v3.11-rc
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] urgent omap5 regulator updates against v3.11-rc3
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH v3 9/9] ARM: DRA7: Add the build support in omap2plus
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 8/9] ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 6/9] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 5/9] ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 4/9] ARM: DRA7: board-generic: Add basic DT support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 3/9] ARM: DRA7: Resue the clocksource, clockevent support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 2/9] ARM: DRA7: Reuse io tables and add a new .init_early
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 1/9] ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 0/9] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 0/8] DRA7xx core support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC/PATCH 2/2] driver: spi: Add quad spi read support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv9 1/2] drivers: spi: Add qspi flash controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv9 0/2] Add ti qspi controller
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [net PATCH 1/1] net: ethernet: davinci_emac: drop IRQF_DISABLED
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: DTS: AM33XX: Add PMU support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv5 06/31] ARM: dts: omap4 clock data
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM4372: add few nodes
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net PATCH 1/1] net: ethernet: davinci_emac: drop IRQF_DISABLED
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 4/9] dma: edma: Find missed events and issue them
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v2 0/8] DRA7xx core support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] net: ethernet: cpsw: drop IRQF_DISABLED
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [FAILURE] omap4430-sdp allnoconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [FAILURE] omap4430-sdp allnoconfig
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] DMA: let filter functions of of_dma_simple_xlate possible check of_node
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [FAILURE] omap4430-sdp allnoconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [FAILURE] omap4430-sdp allnoconfig
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] dma: edma: Find missed events and issue them
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCHv5 26/31] ARM: dts: omap3 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 21/31] ARM: AM33xx: remove old clock data and link in new clock init code
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 16/31] CLK: TI: DRA7: Add APLL support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 23/31] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 29/31] ARM: dts: AM35xx: use DT clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 27/31] CLK: TI: add omap3 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 25/31] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 30/31] ARM: OMAP3: use DT clock init if DT data is available
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 12/31] ARM: dts: dra7 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 24/31] CLK: TI: gate: add support for OMAP36xx dpllx_mx_ck:s
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 19/31] ARM: dts: am33xx clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 08/31] ARM: OMAP4: remove old clock data and link in new clock init code
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 31/31] ARM: dts: am43xx clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 28/31] ARM: dts: AM35xx clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 22/31] CLK: TI: add interface clock support for OMAP3
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 20/31] CLK: TI: add am33xx clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 18/31] CLK: DT: add support for set-rate-parent flag
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 06/31] ARM: dts: omap4 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 09/31] ARM: dts: omap5 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 17/31] CLK: TI: add dra7 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 14/31] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 15/31] ARM: dts: DRA7: Add PCIe related clock nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 13/31] ARM: dts: clk: Add apll related clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 10/31] CLK: TI: add omap5 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 11/31] CLK: TI: omap5: Initialize USB_DPLL at boot
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 07/31] CLK: TI: add omap4 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 02/31] CLK: TI: Add DPLL clock support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 05/31] CLK: TI: add support for OMAP gate clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 04/31] CLK: TI: add autoidle support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 01/31] CLK: clkdev: add support for looking up clocks from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 03/31] CLK: TI: add DT alias clock registration mechanism
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 00/31] CLK: OMAP conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v1 0/4] mtd: nand: omap: add support for BCH16_ECC
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@xxxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] drivers: mtd: devices: make m25p80 dt adapted.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 3/4] dts: dra7-evm: add USB support
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 2/4] ARM: dts: dra7: Add USB related nodes
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 3/6] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 5/5] usb: musb: dsps: use proper child nodes
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@xxxxxxx>
• Re: [PATCH 3/6] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dss-common: fix Panda's DVI DDC channel
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 4/6] v4l: ti-vpe: Add de-interlacer support in VPE
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dss-common: fix Panda's DVI DDC channel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>