(You have not CC'ed Greg, Looping him) On Tuesday 06 August 2013 01:49 PM, Dave Gerlach wrote: > OMAP4 and AM33XX share the same EMIF controller IP. Although there > are significant differences in the IP integration due to which > AM33XX can't reuse the EMIF driver DVFS similar to OMAP4, > it can definitely benefit by reusing the EMIF related macros > defined in drivers/memory/emif.h. > > In the current OMAP PM framework the PM code resides under > arch/arm/mach-omap2/. To enable reuse of the register defines move > the register defines in the emif header file to include/linux so that > both the EMIF driver and the AM33XX PM code can benefit. > > Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx> > Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > Cc: Benoit Cousson <benoit.cousson@xxxxxxxxxx> > Cc: Aneesh V <aneesh@xxxxxx> > --- > drivers/memory/emif.h | 543 +-------------------------------------------- > include/linux/ti_emif.h | 558 +++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 559 insertions(+), 542 deletions(-) > create mode 100644 include/linux/ti_emif.h > For file movement or some part of file movement, while formating patch, use "git format-patch -C" so that only delta change will appear in the patch. The patch as such is fine by me. Acked-by: Santosh Shililmar <santosh.shilimkar@xxxxxx> Greg, Your ack is needed on this patch so that it can go along with the series. Subsequent patch from this series use the register defines from this patch. > diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h > index bfe08ba..8214f07 100644 > --- a/drivers/memory/emif.h > +++ b/drivers/memory/emif.h > @@ -12,548 +12,7 @@ > #ifndef __EMIF_H > #define __EMIF_H > > -/* > - * Maximum number of different frequencies supported by EMIF driver > - * Determines the number of entries in the pointer array for register > - * cache > - */ > -#define EMIF_MAX_NUM_FREQUENCIES 6 > - > -/* State of the core voltage */ > -#define DDR_VOLTAGE_STABLE 0 > -#define DDR_VOLTAGE_RAMPING 1 > - > -/* Defines for timing De-rating */ > -#define EMIF_NORMAL_TIMINGS 0 > -#define EMIF_DERATED_TIMINGS 1 > - > -/* Length of the forced read idle period in terms of cycles */ > -#define EMIF_READ_IDLE_LEN_VAL 5 > - > -/* > - * forced read idle interval to be used when voltage > - * is changed as part of DVFS/DPS - 1ms > - */ > -#define READ_IDLE_INTERVAL_DVFS (1*1000000) > - > -/* > - * Forced read idle interval to be used when voltage is stable > - * 50us - or maximum value will do > - */ > -#define READ_IDLE_INTERVAL_NORMAL (50*1000000) > - > -/* DLL calibration interval when voltage is NOT stable - 1us */ > -#define DLL_CALIB_INTERVAL_DVFS (1*1000000) > - > -#define DLL_CALIB_ACK_WAIT_VAL 5 > - > -/* Interval between ZQCS commands - hw team recommended value */ > -#define EMIF_ZQCS_INTERVAL_US (50*1000) > -/* Enable ZQ Calibration on exiting Self-refresh */ > -#define ZQ_SFEXITEN_ENABLE 1 > -/* > - * ZQ Calibration simultaneously on both chip-selects: > - * Needs one calibration resistor per CS > - */ > -#define ZQ_DUALCALEN_DISABLE 0 > -#define ZQ_DUALCALEN_ENABLE 1 > - > -#define T_ZQCS_DEFAULT_NS 90 > -#define T_ZQCL_DEFAULT_NS 360 > -#define T_ZQINIT_DEFAULT_NS 1000 > - > -/* DPD_EN */ > -#define DPD_DISABLE 0 > -#define DPD_ENABLE 1 > - > -/* > - * Default values for the low-power entry to be used if not provided by user. > - * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512 > - * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz > - */ > -#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE 2048 > -#define EMIF_LP_MODE_TIMEOUT_POWER 512 > -#define EMIF_LP_MODE_FREQ_THRESHOLD 400000000 > - > -/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */ > -#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY 0x049FF000 > -#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY 0x41 > -#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY 0x80 > -#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF > - > -/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */ > -#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY 0x0E084200 > -#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS 10000 > - > -/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */ > -#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS 360 > - > -#define EMIF_T_CSTA 3 > -#define EMIF_T_PDLL_UL 128 > - > -/* External PHY control registers magic values */ > -#define EMIF_EXT_PHY_CTRL_1_VAL 0x04020080 > -#define EMIF_EXT_PHY_CTRL_5_VAL 0x04010040 > -#define EMIF_EXT_PHY_CTRL_6_VAL 0x01004010 > -#define EMIF_EXT_PHY_CTRL_7_VAL 0x00001004 > -#define EMIF_EXT_PHY_CTRL_8_VAL 0x04010040 > -#define EMIF_EXT_PHY_CTRL_9_VAL 0x01004010 > -#define EMIF_EXT_PHY_CTRL_10_VAL 0x00001004 > -#define EMIF_EXT_PHY_CTRL_11_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_12_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_13_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_14_VAL 0x80080080 > -#define EMIF_EXT_PHY_CTRL_15_VAL 0x00800800 > -#define EMIF_EXT_PHY_CTRL_16_VAL 0x08102040 > -#define EMIF_EXT_PHY_CTRL_17_VAL 0x00000001 > -#define EMIF_EXT_PHY_CTRL_18_VAL 0x540A8150 > -#define EMIF_EXT_PHY_CTRL_19_VAL 0xA81502A0 > -#define EMIF_EXT_PHY_CTRL_20_VAL 0x002A0540 > -#define EMIF_EXT_PHY_CTRL_21_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_22_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_23_VAL 0x00000000 > -#define EMIF_EXT_PHY_CTRL_24_VAL 0x00000077 > - > -#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS 1200 > - > -/* Registers offset */ > -#define EMIF_MODULE_ID_AND_REVISION 0x0000 > -#define EMIF_STATUS 0x0004 > -#define EMIF_SDRAM_CONFIG 0x0008 > -#define EMIF_SDRAM_CONFIG_2 0x000c > -#define EMIF_SDRAM_REFRESH_CONTROL 0x0010 > -#define EMIF_SDRAM_REFRESH_CTRL_SHDW 0x0014 > -#define EMIF_SDRAM_TIMING_1 0x0018 > -#define EMIF_SDRAM_TIMING_1_SHDW 0x001c > -#define EMIF_SDRAM_TIMING_2 0x0020 > -#define EMIF_SDRAM_TIMING_2_SHDW 0x0024 > -#define EMIF_SDRAM_TIMING_3 0x0028 > -#define EMIF_SDRAM_TIMING_3_SHDW 0x002c > -#define EMIF_LPDDR2_NVM_TIMING 0x0030 > -#define EMIF_LPDDR2_NVM_TIMING_SHDW 0x0034 > -#define EMIF_POWER_MANAGEMENT_CONTROL 0x0038 > -#define EMIF_POWER_MANAGEMENT_CTRL_SHDW 0x003c > -#define EMIF_LPDDR2_MODE_REG_DATA 0x0040 > -#define EMIF_LPDDR2_MODE_REG_CONFIG 0x0050 > -#define EMIF_OCP_CONFIG 0x0054 > -#define EMIF_OCP_CONFIG_VALUE_1 0x0058 > -#define EMIF_OCP_CONFIG_VALUE_2 0x005c > -#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL 0x0060 > -#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT 0x0064 > -#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT 0x0068 > -#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1 0x006c > -#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2 0x0070 > -#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3 0x0074 > -#define EMIF_PERFORMANCE_COUNTER_1 0x0080 > -#define EMIF_PERFORMANCE_COUNTER_2 0x0084 > -#define EMIF_PERFORMANCE_COUNTER_CONFIG 0x0088 > -#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT 0x008c > -#define EMIF_PERFORMANCE_COUNTER_TIME 0x0090 > -#define EMIF_MISC_REG 0x0094 > -#define EMIF_DLL_CALIB_CTRL 0x0098 > -#define EMIF_DLL_CALIB_CTRL_SHDW 0x009c > -#define EMIF_END_OF_INTERRUPT 0x00a0 > -#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS 0x00a4 > -#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS 0x00a8 > -#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS 0x00ac > -#define EMIF_LL_OCP_INTERRUPT_STATUS 0x00b0 > -#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET 0x00b4 > -#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET 0x00b8 > -#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR 0x00bc > -#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR 0x00c0 > -#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG 0x00c8 > -#define EMIF_TEMPERATURE_ALERT_CONFIG 0x00cc > -#define EMIF_OCP_ERROR_LOG 0x00d0 > -#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW 0x00d4 > -#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL 0x00d8 > -#define EMIF_READ_WRITE_LEVELING_CONTROL 0x00dc > -#define EMIF_DDR_PHY_CTRL_1 0x00e4 > -#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00e8 > -#define EMIF_DDR_PHY_CTRL_2 0x00ec > -#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING 0x0100 > -#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104 > -#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108 > -#define EMIF_READ_WRITE_EXECUTION_THRESHOLD 0x0120 > -#define EMIF_COS_CONFIG 0x0124 > -#define EMIF_PHY_STATUS_1 0x0140 > -#define EMIF_PHY_STATUS_2 0x0144 > -#define EMIF_PHY_STATUS_3 0x0148 > -#define EMIF_PHY_STATUS_4 0x014c > -#define EMIF_PHY_STATUS_5 0x0150 > -#define EMIF_PHY_STATUS_6 0x0154 > -#define EMIF_PHY_STATUS_7 0x0158 > -#define EMIF_PHY_STATUS_8 0x015c > -#define EMIF_PHY_STATUS_9 0x0160 > -#define EMIF_PHY_STATUS_10 0x0164 > -#define EMIF_PHY_STATUS_11 0x0168 > -#define EMIF_PHY_STATUS_12 0x016c > -#define EMIF_PHY_STATUS_13 0x0170 > -#define EMIF_PHY_STATUS_14 0x0174 > -#define EMIF_PHY_STATUS_15 0x0178 > -#define EMIF_PHY_STATUS_16 0x017c > -#define EMIF_PHY_STATUS_17 0x0180 > -#define EMIF_PHY_STATUS_18 0x0184 > -#define EMIF_PHY_STATUS_19 0x0188 > -#define EMIF_PHY_STATUS_20 0x018c > -#define EMIF_PHY_STATUS_21 0x0190 > -#define EMIF_EXT_PHY_CTRL_1 0x0200 > -#define EMIF_EXT_PHY_CTRL_1_SHDW 0x0204 > -#define EMIF_EXT_PHY_CTRL_2 0x0208 > -#define EMIF_EXT_PHY_CTRL_2_SHDW 0x020c > -#define EMIF_EXT_PHY_CTRL_3 0x0210 > -#define EMIF_EXT_PHY_CTRL_3_SHDW 0x0214 > -#define EMIF_EXT_PHY_CTRL_4 0x0218 > -#define EMIF_EXT_PHY_CTRL_4_SHDW 0x021c > -#define EMIF_EXT_PHY_CTRL_5 0x0220 > -#define EMIF_EXT_PHY_CTRL_5_SHDW 0x0224 > -#define EMIF_EXT_PHY_CTRL_6 0x0228 > -#define EMIF_EXT_PHY_CTRL_6_SHDW 0x022c > -#define EMIF_EXT_PHY_CTRL_7 0x0230 > -#define EMIF_EXT_PHY_CTRL_7_SHDW 0x0234 > -#define EMIF_EXT_PHY_CTRL_8 0x0238 > -#define EMIF_EXT_PHY_CTRL_8_SHDW 0x023c > -#define EMIF_EXT_PHY_CTRL_9 0x0240 > -#define EMIF_EXT_PHY_CTRL_9_SHDW 0x0244 > -#define EMIF_EXT_PHY_CTRL_10 0x0248 > -#define EMIF_EXT_PHY_CTRL_10_SHDW 0x024c > -#define EMIF_EXT_PHY_CTRL_11 0x0250 > -#define EMIF_EXT_PHY_CTRL_11_SHDW 0x0254 > -#define EMIF_EXT_PHY_CTRL_12 0x0258 > -#define EMIF_EXT_PHY_CTRL_12_SHDW 0x025c > -#define EMIF_EXT_PHY_CTRL_13 0x0260 > -#define EMIF_EXT_PHY_CTRL_13_SHDW 0x0264 > -#define EMIF_EXT_PHY_CTRL_14 0x0268 > -#define EMIF_EXT_PHY_CTRL_14_SHDW 0x026c > -#define EMIF_EXT_PHY_CTRL_15 0x0270 > -#define EMIF_EXT_PHY_CTRL_15_SHDW 0x0274 > -#define EMIF_EXT_PHY_CTRL_16 0x0278 > -#define EMIF_EXT_PHY_CTRL_16_SHDW 0x027c > -#define EMIF_EXT_PHY_CTRL_17 0x0280 > -#define EMIF_EXT_PHY_CTRL_17_SHDW 0x0284 > -#define EMIF_EXT_PHY_CTRL_18 0x0288 > -#define EMIF_EXT_PHY_CTRL_18_SHDW 0x028c > -#define EMIF_EXT_PHY_CTRL_19 0x0290 > -#define EMIF_EXT_PHY_CTRL_19_SHDW 0x0294 > -#define EMIF_EXT_PHY_CTRL_20 0x0298 > -#define EMIF_EXT_PHY_CTRL_20_SHDW 0x029c > -#define EMIF_EXT_PHY_CTRL_21 0x02a0 > -#define EMIF_EXT_PHY_CTRL_21_SHDW 0x02a4 > -#define EMIF_EXT_PHY_CTRL_22 0x02a8 > -#define EMIF_EXT_PHY_CTRL_22_SHDW 0x02ac > -#define EMIF_EXT_PHY_CTRL_23 0x02b0 > -#define EMIF_EXT_PHY_CTRL_23_SHDW 0x02b4 > -#define EMIF_EXT_PHY_CTRL_24 0x02b8 > -#define EMIF_EXT_PHY_CTRL_24_SHDW 0x02bc > -#define EMIF_EXT_PHY_CTRL_25 0x02c0 > -#define EMIF_EXT_PHY_CTRL_25_SHDW 0x02c4 > -#define EMIF_EXT_PHY_CTRL_26 0x02c8 > -#define EMIF_EXT_PHY_CTRL_26_SHDW 0x02cc > -#define EMIF_EXT_PHY_CTRL_27 0x02d0 > -#define EMIF_EXT_PHY_CTRL_27_SHDW 0x02d4 > -#define EMIF_EXT_PHY_CTRL_28 0x02d8 > -#define EMIF_EXT_PHY_CTRL_28_SHDW 0x02dc > -#define EMIF_EXT_PHY_CTRL_29 0x02e0 > -#define EMIF_EXT_PHY_CTRL_29_SHDW 0x02e4 > -#define EMIF_EXT_PHY_CTRL_30 0x02e8 > -#define EMIF_EXT_PHY_CTRL_30_SHDW 0x02ec > - > -/* Registers shifts and masks */ > - > -/* EMIF_MODULE_ID_AND_REVISION */ > -#define SCHEME_SHIFT 30 > -#define SCHEME_MASK (0x3 << 30) > -#define MODULE_ID_SHIFT 16 > -#define MODULE_ID_MASK (0xfff << 16) > -#define RTL_VERSION_SHIFT 11 > -#define RTL_VERSION_MASK (0x1f << 11) > -#define MAJOR_REVISION_SHIFT 8 > -#define MAJOR_REVISION_MASK (0x7 << 8) > -#define MINOR_REVISION_SHIFT 0 > -#define MINOR_REVISION_MASK (0x3f << 0) > - > -/* STATUS */ > -#define BE_SHIFT 31 > -#define BE_MASK (1 << 31) > -#define DUAL_CLK_MODE_SHIFT 30 > -#define DUAL_CLK_MODE_MASK (1 << 30) > -#define FAST_INIT_SHIFT 29 > -#define FAST_INIT_MASK (1 << 29) > -#define RDLVLGATETO_SHIFT 6 > -#define RDLVLGATETO_MASK (1 << 6) > -#define RDLVLTO_SHIFT 5 > -#define RDLVLTO_MASK (1 << 5) > -#define WRLVLTO_SHIFT 4 > -#define WRLVLTO_MASK (1 << 4) > -#define PHY_DLL_READY_SHIFT 2 > -#define PHY_DLL_READY_MASK (1 << 2) > - > -/* SDRAM_CONFIG */ > -#define SDRAM_TYPE_SHIFT 29 > -#define SDRAM_TYPE_MASK (0x7 << 29) > -#define IBANK_POS_SHIFT 27 > -#define IBANK_POS_MASK (0x3 << 27) > -#define DDR_TERM_SHIFT 24 > -#define DDR_TERM_MASK (0x7 << 24) > -#define DDR2_DDQS_SHIFT 23 > -#define DDR2_DDQS_MASK (1 << 23) > -#define DYN_ODT_SHIFT 21 > -#define DYN_ODT_MASK (0x3 << 21) > -#define DDR_DISABLE_DLL_SHIFT 20 > -#define DDR_DISABLE_DLL_MASK (1 << 20) > -#define SDRAM_DRIVE_SHIFT 18 > -#define SDRAM_DRIVE_MASK (0x3 << 18) > -#define CWL_SHIFT 16 > -#define CWL_MASK (0x3 << 16) > -#define NARROW_MODE_SHIFT 14 > -#define NARROW_MODE_MASK (0x3 << 14) > -#define CL_SHIFT 10 > -#define CL_MASK (0xf << 10) > -#define ROWSIZE_SHIFT 7 > -#define ROWSIZE_MASK (0x7 << 7) > -#define IBANK_SHIFT 4 > -#define IBANK_MASK (0x7 << 4) > -#define EBANK_SHIFT 3 > -#define EBANK_MASK (1 << 3) > -#define PAGESIZE_SHIFT 0 > -#define PAGESIZE_MASK (0x7 << 0) > - > -/* SDRAM_CONFIG_2 */ > -#define CS1NVMEN_SHIFT 30 > -#define CS1NVMEN_MASK (1 << 30) > -#define EBANK_POS_SHIFT 27 > -#define EBANK_POS_MASK (1 << 27) > -#define RDBNUM_SHIFT 4 > -#define RDBNUM_MASK (0x3 << 4) > -#define RDBSIZE_SHIFT 0 > -#define RDBSIZE_MASK (0x7 << 0) > - > -/* SDRAM_REFRESH_CONTROL */ > -#define INITREF_DIS_SHIFT 31 > -#define INITREF_DIS_MASK (1 << 31) > -#define SRT_SHIFT 29 > -#define SRT_MASK (1 << 29) > -#define ASR_SHIFT 28 > -#define ASR_MASK (1 << 28) > -#define PASR_SHIFT 24 > -#define PASR_MASK (0x7 << 24) > -#define REFRESH_RATE_SHIFT 0 > -#define REFRESH_RATE_MASK (0xffff << 0) > - > -/* SDRAM_TIMING_1 */ > -#define T_RTW_SHIFT 29 > -#define T_RTW_MASK (0x7 << 29) > -#define T_RP_SHIFT 25 > -#define T_RP_MASK (0xf << 25) > -#define T_RCD_SHIFT 21 > -#define T_RCD_MASK (0xf << 21) > -#define T_WR_SHIFT 17 > -#define T_WR_MASK (0xf << 17) > -#define T_RAS_SHIFT 12 > -#define T_RAS_MASK (0x1f << 12) > -#define T_RC_SHIFT 6 > -#define T_RC_MASK (0x3f << 6) > -#define T_RRD_SHIFT 3 > -#define T_RRD_MASK (0x7 << 3) > -#define T_WTR_SHIFT 0 > -#define T_WTR_MASK (0x7 << 0) > - > -/* SDRAM_TIMING_2 */ > -#define T_XP_SHIFT 28 > -#define T_XP_MASK (0x7 << 28) > -#define T_ODT_SHIFT 25 > -#define T_ODT_MASK (0x7 << 25) > -#define T_XSNR_SHIFT 16 > -#define T_XSNR_MASK (0x1ff << 16) > -#define T_XSRD_SHIFT 6 > -#define T_XSRD_MASK (0x3ff << 6) > -#define T_RTP_SHIFT 3 > -#define T_RTP_MASK (0x7 << 3) > -#define T_CKE_SHIFT 0 > -#define T_CKE_MASK (0x7 << 0) > - > -/* SDRAM_TIMING_3 */ > -#define T_PDLL_UL_SHIFT 28 > -#define T_PDLL_UL_MASK (0xf << 28) > -#define T_CSTA_SHIFT 24 > -#define T_CSTA_MASK (0xf << 24) > -#define T_CKESR_SHIFT 21 > -#define T_CKESR_MASK (0x7 << 21) > -#define ZQ_ZQCS_SHIFT 15 > -#define ZQ_ZQCS_MASK (0x3f << 15) > -#define T_TDQSCKMAX_SHIFT 13 > -#define T_TDQSCKMAX_MASK (0x3 << 13) > -#define T_RFC_SHIFT 4 > -#define T_RFC_MASK (0x1ff << 4) > -#define T_RAS_MAX_SHIFT 0 > -#define T_RAS_MAX_MASK (0xf << 0) > - > -/* POWER_MANAGEMENT_CONTROL */ > -#define PD_TIM_SHIFT 12 > -#define PD_TIM_MASK (0xf << 12) > -#define DPD_EN_SHIFT 11 > -#define DPD_EN_MASK (1 << 11) > -#define LP_MODE_SHIFT 8 > -#define LP_MODE_MASK (0x7 << 8) > -#define SR_TIM_SHIFT 4 > -#define SR_TIM_MASK (0xf << 4) > -#define CS_TIM_SHIFT 0 > -#define CS_TIM_MASK (0xf << 0) > - > -/* LPDDR2_MODE_REG_DATA */ > -#define VALUE_0_SHIFT 0 > -#define VALUE_0_MASK (0x7f << 0) > - > -/* LPDDR2_MODE_REG_CONFIG */ > -#define CS_SHIFT 31 > -#define CS_MASK (1 << 31) > -#define REFRESH_EN_SHIFT 30 > -#define REFRESH_EN_MASK (1 << 30) > -#define ADDRESS_SHIFT 0 > -#define ADDRESS_MASK (0xff << 0) > - > -/* OCP_CONFIG */ > -#define SYS_THRESH_MAX_SHIFT 24 > -#define SYS_THRESH_MAX_MASK (0xf << 24) > -#define MPU_THRESH_MAX_SHIFT 20 > -#define MPU_THRESH_MAX_MASK (0xf << 20) > -#define LL_THRESH_MAX_SHIFT 16 > -#define LL_THRESH_MAX_MASK (0xf << 16) > - > -/* PERFORMANCE_COUNTER_1 */ > -#define COUNTER1_SHIFT 0 > -#define COUNTER1_MASK (0xffffffff << 0) > - > -/* PERFORMANCE_COUNTER_2 */ > -#define COUNTER2_SHIFT 0 > -#define COUNTER2_MASK (0xffffffff << 0) > - > -/* PERFORMANCE_COUNTER_CONFIG */ > -#define CNTR2_MCONNID_EN_SHIFT 31 > -#define CNTR2_MCONNID_EN_MASK (1 << 31) > -#define CNTR2_REGION_EN_SHIFT 30 > -#define CNTR2_REGION_EN_MASK (1 << 30) > -#define CNTR2_CFG_SHIFT 16 > -#define CNTR2_CFG_MASK (0xf << 16) > -#define CNTR1_MCONNID_EN_SHIFT 15 > -#define CNTR1_MCONNID_EN_MASK (1 << 15) > -#define CNTR1_REGION_EN_SHIFT 14 > -#define CNTR1_REGION_EN_MASK (1 << 14) > -#define CNTR1_CFG_SHIFT 0 > -#define CNTR1_CFG_MASK (0xf << 0) > - > -/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */ > -#define MCONNID2_SHIFT 24 > -#define MCONNID2_MASK (0xff << 24) > -#define REGION_SEL2_SHIFT 16 > -#define REGION_SEL2_MASK (0x3 << 16) > -#define MCONNID1_SHIFT 8 > -#define MCONNID1_MASK (0xff << 8) > -#define REGION_SEL1_SHIFT 0 > -#define REGION_SEL1_MASK (0x3 << 0) > - > -/* PERFORMANCE_COUNTER_TIME */ > -#define TOTAL_TIME_SHIFT 0 > -#define TOTAL_TIME_MASK (0xffffffff << 0) > - > -/* DLL_CALIB_CTRL */ > -#define ACK_WAIT_SHIFT 16 > -#define ACK_WAIT_MASK (0xf << 16) > -#define DLL_CALIB_INTERVAL_SHIFT 0 > -#define DLL_CALIB_INTERVAL_MASK (0x1ff << 0) > - > -/* END_OF_INTERRUPT */ > -#define EOI_SHIFT 0 > -#define EOI_MASK (1 << 0) > - > -/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */ > -#define DNV_SYS_SHIFT 2 > -#define DNV_SYS_MASK (1 << 2) > -#define TA_SYS_SHIFT 1 > -#define TA_SYS_MASK (1 << 1) > -#define ERR_SYS_SHIFT 0 > -#define ERR_SYS_MASK (1 << 0) > - > -/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */ > -#define DNV_LL_SHIFT 2 > -#define DNV_LL_MASK (1 << 2) > -#define TA_LL_SHIFT 1 > -#define TA_LL_MASK (1 << 1) > -#define ERR_LL_SHIFT 0 > -#define ERR_LL_MASK (1 << 0) > - > -/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */ > -#define EN_DNV_SYS_SHIFT 2 > -#define EN_DNV_SYS_MASK (1 << 2) > -#define EN_TA_SYS_SHIFT 1 > -#define EN_TA_SYS_MASK (1 << 1) > -#define EN_ERR_SYS_SHIFT 0 > -#define EN_ERR_SYS_MASK (1 << 0) > - > -/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */ > -#define EN_DNV_LL_SHIFT 2 > -#define EN_DNV_LL_MASK (1 << 2) > -#define EN_TA_LL_SHIFT 1 > -#define EN_TA_LL_MASK (1 << 1) > -#define EN_ERR_LL_SHIFT 0 > -#define EN_ERR_LL_MASK (1 << 0) > - > -/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */ > -#define ZQ_CS1EN_SHIFT 31 > -#define ZQ_CS1EN_MASK (1 << 31) > -#define ZQ_CS0EN_SHIFT 30 > -#define ZQ_CS0EN_MASK (1 << 30) > -#define ZQ_DUALCALEN_SHIFT 29 > -#define ZQ_DUALCALEN_MASK (1 << 29) > -#define ZQ_SFEXITEN_SHIFT 28 > -#define ZQ_SFEXITEN_MASK (1 << 28) > -#define ZQ_ZQINIT_MULT_SHIFT 18 > -#define ZQ_ZQINIT_MULT_MASK (0x3 << 18) > -#define ZQ_ZQCL_MULT_SHIFT 16 > -#define ZQ_ZQCL_MULT_MASK (0x3 << 16) > -#define ZQ_REFINTERVAL_SHIFT 0 > -#define ZQ_REFINTERVAL_MASK (0xffff << 0) > - > -/* TEMPERATURE_ALERT_CONFIG */ > -#define TA_CS1EN_SHIFT 31 > -#define TA_CS1EN_MASK (1 << 31) > -#define TA_CS0EN_SHIFT 30 > -#define TA_CS0EN_MASK (1 << 30) > -#define TA_SFEXITEN_SHIFT 28 > -#define TA_SFEXITEN_MASK (1 << 28) > -#define TA_DEVWDT_SHIFT 26 > -#define TA_DEVWDT_MASK (0x3 << 26) > -#define TA_DEVCNT_SHIFT 24 > -#define TA_DEVCNT_MASK (0x3 << 24) > -#define TA_REFINTERVAL_SHIFT 0 > -#define TA_REFINTERVAL_MASK (0x3fffff << 0) > - > -/* OCP_ERROR_LOG */ > -#define MADDRSPACE_SHIFT 14 > -#define MADDRSPACE_MASK (0x3 << 14) > -#define MBURSTSEQ_SHIFT 11 > -#define MBURSTSEQ_MASK (0x7 << 11) > -#define MCMD_SHIFT 8 > -#define MCMD_MASK (0x7 << 8) > -#define MCONNID_SHIFT 0 > -#define MCONNID_MASK (0xff << 0) > - > -/* DDR_PHY_CTRL_1 - EMIF4D */ > -#define DLL_SLAVE_DLY_CTRL_SHIFT_4D 4 > -#define DLL_SLAVE_DLY_CTRL_MASK_4D (0xFF << 4) > -#define READ_LATENCY_SHIFT_4D 0 > -#define READ_LATENCY_MASK_4D (0xf << 0) > - > -/* DDR_PHY_CTRL_1 - EMIF4D5 */ > -#define DLL_HALF_DELAY_SHIFT_4D5 21 > -#define DLL_HALF_DELAY_MASK_4D5 (1 << 21) > -#define READ_LATENCY_SHIFT_4D5 0 > -#define READ_LATENCY_MASK_4D5 (0x1f << 0) > - > -/* DDR_PHY_CTRL_1_SHDW */ > -#define DDR_PHY_CTRL_1_SHDW_SHIFT 5 > -#define DDR_PHY_CTRL_1_SHDW_MASK (0x7ffffff << 5) > -#define READ_LATENCY_SHDW_SHIFT 0 > -#define READ_LATENCY_SHDW_MASK (0x1f << 0) > +#include <linux/ti_emif.h> > > #ifndef __ASSEMBLY__ > /* > diff --git a/include/linux/ti_emif.h b/include/linux/ti_emif.h > new file mode 100644 > index 0000000..be26e7f > --- /dev/null > +++ b/include/linux/ti_emif.h > @@ -0,0 +1,558 @@ > +/* > + * Register defines for the EMIF driver > + * > + * Copyright (C) 2012 Texas Instruments, Inc. > + * > + * Benoit Cousson (b-cousson@xxxxxx) > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +#ifndef __TI_EMIF_H > +#define __TI_EMIF_H > + > +/* > + * Maximum number of different frequencies supported by EMIF driver > + * Determines the number of entries in the pointer array for register > + * cache > + */ > +#define EMIF_MAX_NUM_FREQUENCIES 6 > + > +/* State of the core voltage */ > +#define DDR_VOLTAGE_STABLE 0 > +#define DDR_VOLTAGE_RAMPING 1 > + > +/* Defines for timing De-rating */ > +#define EMIF_NORMAL_TIMINGS 0 > +#define EMIF_DERATED_TIMINGS 1 > + > +/* Length of the forced read idle period in terms of cycles */ > +#define EMIF_READ_IDLE_LEN_VAL 5 > + > +/* > + * forced read idle interval to be used when voltage > + * is changed as part of DVFS/DPS - 1ms > + */ > +#define READ_IDLE_INTERVAL_DVFS (1*1000000) > + > +/* > + * Forced read idle interval to be used when voltage is stable > + * 50us - or maximum value will do > + */ > +#define READ_IDLE_INTERVAL_NORMAL (50*1000000) > + > +/* DLL calibration interval when voltage is NOT stable - 1us */ > +#define DLL_CALIB_INTERVAL_DVFS (1*1000000) > + > +#define DLL_CALIB_ACK_WAIT_VAL 5 > + > +/* Interval between ZQCS commands - hw team recommended value */ > +#define EMIF_ZQCS_INTERVAL_US (50*1000) > +/* Enable ZQ Calibration on exiting Self-refresh */ > +#define ZQ_SFEXITEN_ENABLE 1 > +/* > + * ZQ Calibration simultaneously on both chip-selects: > + * Needs one calibration resistor per CS > + */ > +#define ZQ_DUALCALEN_DISABLE 0 > +#define ZQ_DUALCALEN_ENABLE 1 > + > +#define T_ZQCS_DEFAULT_NS 90 > +#define T_ZQCL_DEFAULT_NS 360 > +#define T_ZQINIT_DEFAULT_NS 1000 > + > +/* DPD_EN */ > +#define DPD_DISABLE 0 > +#define DPD_ENABLE 1 > + > +/* > + * Default values for the low-power entry to be used if not provided by user. > + * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512 > + * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz > + */ > +#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE 2048 > +#define EMIF_LP_MODE_TIMEOUT_POWER 512 > +#define EMIF_LP_MODE_FREQ_THRESHOLD 400000000 > + > +/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */ > +#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY 0x049FF000 > +#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY 0x41 > +#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY 0x80 > +#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF > + > +/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */ > +#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY 0x0E084200 > +#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS 10000 > + > +/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */ > +#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS 360 > + > +#define EMIF_T_CSTA 3 > +#define EMIF_T_PDLL_UL 128 > + > +/* External PHY control registers magic values */ > +#define EMIF_EXT_PHY_CTRL_1_VAL 0x04020080 > +#define EMIF_EXT_PHY_CTRL_5_VAL 0x04010040 > +#define EMIF_EXT_PHY_CTRL_6_VAL 0x01004010 > +#define EMIF_EXT_PHY_CTRL_7_VAL 0x00001004 > +#define EMIF_EXT_PHY_CTRL_8_VAL 0x04010040 > +#define EMIF_EXT_PHY_CTRL_9_VAL 0x01004010 > +#define EMIF_EXT_PHY_CTRL_10_VAL 0x00001004 > +#define EMIF_EXT_PHY_CTRL_11_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_12_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_13_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_14_VAL 0x80080080 > +#define EMIF_EXT_PHY_CTRL_15_VAL 0x00800800 > +#define EMIF_EXT_PHY_CTRL_16_VAL 0x08102040 > +#define EMIF_EXT_PHY_CTRL_17_VAL 0x00000001 > +#define EMIF_EXT_PHY_CTRL_18_VAL 0x540A8150 > +#define EMIF_EXT_PHY_CTRL_19_VAL 0xA81502A0 > +#define EMIF_EXT_PHY_CTRL_20_VAL 0x002A0540 > +#define EMIF_EXT_PHY_CTRL_21_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_22_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_23_VAL 0x00000000 > +#define EMIF_EXT_PHY_CTRL_24_VAL 0x00000077 > + > +#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS 1200 > + > +/* Registers offset */ > +#define EMIF_MODULE_ID_AND_REVISION 0x0000 > +#define EMIF_STATUS 0x0004 > +#define EMIF_SDRAM_CONFIG 0x0008 > +#define EMIF_SDRAM_CONFIG_2 0x000c > +#define EMIF_SDRAM_REFRESH_CONTROL 0x0010 > +#define EMIF_SDRAM_REFRESH_CTRL_SHDW 0x0014 > +#define EMIF_SDRAM_TIMING_1 0x0018 > +#define EMIF_SDRAM_TIMING_1_SHDW 0x001c > +#define EMIF_SDRAM_TIMING_2 0x0020 > +#define EMIF_SDRAM_TIMING_2_SHDW 0x0024 > +#define EMIF_SDRAM_TIMING_3 0x0028 > +#define EMIF_SDRAM_TIMING_3_SHDW 0x002c > +#define EMIF_LPDDR2_NVM_TIMING 0x0030 > +#define EMIF_LPDDR2_NVM_TIMING_SHDW 0x0034 > +#define EMIF_POWER_MANAGEMENT_CONTROL 0x0038 > +#define EMIF_POWER_MANAGEMENT_CTRL_SHDW 0x003c > +#define EMIF_LPDDR2_MODE_REG_DATA 0x0040 > +#define EMIF_LPDDR2_MODE_REG_CONFIG 0x0050 > +#define EMIF_OCP_CONFIG 0x0054 > +#define EMIF_OCP_CONFIG_VALUE_1 0x0058 > +#define EMIF_OCP_CONFIG_VALUE_2 0x005c > +#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL 0x0060 > +#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT 0x0064 > +#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT 0x0068 > +#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1 0x006c > +#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2 0x0070 > +#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3 0x0074 > +#define EMIF_PERFORMANCE_COUNTER_1 0x0080 > +#define EMIF_PERFORMANCE_COUNTER_2 0x0084 > +#define EMIF_PERFORMANCE_COUNTER_CONFIG 0x0088 > +#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT 0x008c > +#define EMIF_PERFORMANCE_COUNTER_TIME 0x0090 > +#define EMIF_MISC_REG 0x0094 > +#define EMIF_DLL_CALIB_CTRL 0x0098 > +#define EMIF_DLL_CALIB_CTRL_SHDW 0x009c > +#define EMIF_END_OF_INTERRUPT 0x00a0 > +#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS 0x00a4 > +#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS 0x00a8 > +#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS 0x00ac > +#define EMIF_LL_OCP_INTERRUPT_STATUS 0x00b0 > +#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET 0x00b4 > +#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET 0x00b8 > +#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR 0x00bc > +#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR 0x00c0 > +#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG 0x00c8 > +#define EMIF_TEMPERATURE_ALERT_CONFIG 0x00cc > +#define EMIF_OCP_ERROR_LOG 0x00d0 > +#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW 0x00d4 > +#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL 0x00d8 > +#define EMIF_READ_WRITE_LEVELING_CONTROL 0x00dc > +#define EMIF_DDR_PHY_CTRL_1 0x00e4 > +#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00e8 > +#define EMIF_DDR_PHY_CTRL_2 0x00ec > +#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING 0x0100 > +#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104 > +#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108 > +#define EMIF_READ_WRITE_EXECUTION_THRESHOLD 0x0120 > +#define EMIF_COS_CONFIG 0x0124 > +#define EMIF_PHY_STATUS_1 0x0140 > +#define EMIF_PHY_STATUS_2 0x0144 > +#define EMIF_PHY_STATUS_3 0x0148 > +#define EMIF_PHY_STATUS_4 0x014c > +#define EMIF_PHY_STATUS_5 0x0150 > +#define EMIF_PHY_STATUS_6 0x0154 > +#define EMIF_PHY_STATUS_7 0x0158 > +#define EMIF_PHY_STATUS_8 0x015c > +#define EMIF_PHY_STATUS_9 0x0160 > +#define EMIF_PHY_STATUS_10 0x0164 > +#define EMIF_PHY_STATUS_11 0x0168 > +#define EMIF_PHY_STATUS_12 0x016c > +#define EMIF_PHY_STATUS_13 0x0170 > +#define EMIF_PHY_STATUS_14 0x0174 > +#define EMIF_PHY_STATUS_15 0x0178 > +#define EMIF_PHY_STATUS_16 0x017c > +#define EMIF_PHY_STATUS_17 0x0180 > +#define EMIF_PHY_STATUS_18 0x0184 > +#define EMIF_PHY_STATUS_19 0x0188 > +#define EMIF_PHY_STATUS_20 0x018c > +#define EMIF_PHY_STATUS_21 0x0190 > +#define EMIF_EXT_PHY_CTRL_1 0x0200 > +#define EMIF_EXT_PHY_CTRL_1_SHDW 0x0204 > +#define EMIF_EXT_PHY_CTRL_2 0x0208 > +#define EMIF_EXT_PHY_CTRL_2_SHDW 0x020c > +#define EMIF_EXT_PHY_CTRL_3 0x0210 > +#define EMIF_EXT_PHY_CTRL_3_SHDW 0x0214 > +#define EMIF_EXT_PHY_CTRL_4 0x0218 > +#define EMIF_EXT_PHY_CTRL_4_SHDW 0x021c > +#define EMIF_EXT_PHY_CTRL_5 0x0220 > +#define EMIF_EXT_PHY_CTRL_5_SHDW 0x0224 > +#define EMIF_EXT_PHY_CTRL_6 0x0228 > +#define EMIF_EXT_PHY_CTRL_6_SHDW 0x022c > +#define EMIF_EXT_PHY_CTRL_7 0x0230 > +#define EMIF_EXT_PHY_CTRL_7_SHDW 0x0234 > +#define EMIF_EXT_PHY_CTRL_8 0x0238 > +#define EMIF_EXT_PHY_CTRL_8_SHDW 0x023c > +#define EMIF_EXT_PHY_CTRL_9 0x0240 > +#define EMIF_EXT_PHY_CTRL_9_SHDW 0x0244 > +#define EMIF_EXT_PHY_CTRL_10 0x0248 > +#define EMIF_EXT_PHY_CTRL_10_SHDW 0x024c > +#define EMIF_EXT_PHY_CTRL_11 0x0250 > +#define EMIF_EXT_PHY_CTRL_11_SHDW 0x0254 > +#define EMIF_EXT_PHY_CTRL_12 0x0258 > +#define EMIF_EXT_PHY_CTRL_12_SHDW 0x025c > +#define EMIF_EXT_PHY_CTRL_13 0x0260 > +#define EMIF_EXT_PHY_CTRL_13_SHDW 0x0264 > +#define EMIF_EXT_PHY_CTRL_14 0x0268 > +#define EMIF_EXT_PHY_CTRL_14_SHDW 0x026c > +#define EMIF_EXT_PHY_CTRL_15 0x0270 > +#define EMIF_EXT_PHY_CTRL_15_SHDW 0x0274 > +#define EMIF_EXT_PHY_CTRL_16 0x0278 > +#define EMIF_EXT_PHY_CTRL_16_SHDW 0x027c > +#define EMIF_EXT_PHY_CTRL_17 0x0280 > +#define EMIF_EXT_PHY_CTRL_17_SHDW 0x0284 > +#define EMIF_EXT_PHY_CTRL_18 0x0288 > +#define EMIF_EXT_PHY_CTRL_18_SHDW 0x028c > +#define EMIF_EXT_PHY_CTRL_19 0x0290 > +#define EMIF_EXT_PHY_CTRL_19_SHDW 0x0294 > +#define EMIF_EXT_PHY_CTRL_20 0x0298 > +#define EMIF_EXT_PHY_CTRL_20_SHDW 0x029c > +#define EMIF_EXT_PHY_CTRL_21 0x02a0 > +#define EMIF_EXT_PHY_CTRL_21_SHDW 0x02a4 > +#define EMIF_EXT_PHY_CTRL_22 0x02a8 > +#define EMIF_EXT_PHY_CTRL_22_SHDW 0x02ac > +#define EMIF_EXT_PHY_CTRL_23 0x02b0 > +#define EMIF_EXT_PHY_CTRL_23_SHDW 0x02b4 > +#define EMIF_EXT_PHY_CTRL_24 0x02b8 > +#define EMIF_EXT_PHY_CTRL_24_SHDW 0x02bc > +#define EMIF_EXT_PHY_CTRL_25 0x02c0 > +#define EMIF_EXT_PHY_CTRL_25_SHDW 0x02c4 > +#define EMIF_EXT_PHY_CTRL_26 0x02c8 > +#define EMIF_EXT_PHY_CTRL_26_SHDW 0x02cc > +#define EMIF_EXT_PHY_CTRL_27 0x02d0 > +#define EMIF_EXT_PHY_CTRL_27_SHDW 0x02d4 > +#define EMIF_EXT_PHY_CTRL_28 0x02d8 > +#define EMIF_EXT_PHY_CTRL_28_SHDW 0x02dc > +#define EMIF_EXT_PHY_CTRL_29 0x02e0 > +#define EMIF_EXT_PHY_CTRL_29_SHDW 0x02e4 > +#define EMIF_EXT_PHY_CTRL_30 0x02e8 > +#define EMIF_EXT_PHY_CTRL_30_SHDW 0x02ec > + > +/* Registers shifts and masks */ > + > +/* EMIF_MODULE_ID_AND_REVISION */ > +#define SCHEME_SHIFT 30 > +#define SCHEME_MASK (0x3 << 30) > +#define MODULE_ID_SHIFT 16 > +#define MODULE_ID_MASK (0xfff << 16) > +#define RTL_VERSION_SHIFT 11 > +#define RTL_VERSION_MASK (0x1f << 11) > +#define MAJOR_REVISION_SHIFT 8 > +#define MAJOR_REVISION_MASK (0x7 << 8) > +#define MINOR_REVISION_SHIFT 0 > +#define MINOR_REVISION_MASK (0x3f << 0) > + > +/* STATUS */ > +#define BE_SHIFT 31 > +#define BE_MASK (1 << 31) > +#define DUAL_CLK_MODE_SHIFT 30 > +#define DUAL_CLK_MODE_MASK (1 << 30) > +#define FAST_INIT_SHIFT 29 > +#define FAST_INIT_MASK (1 << 29) > +#define RDLVLGATETO_SHIFT 6 > +#define RDLVLGATETO_MASK (1 << 6) > +#define RDLVLTO_SHIFT 5 > +#define RDLVLTO_MASK (1 << 5) > +#define WRLVLTO_SHIFT 4 > +#define WRLVLTO_MASK (1 << 4) > +#define PHY_DLL_READY_SHIFT 2 > +#define PHY_DLL_READY_MASK (1 << 2) > + > +/* SDRAM_CONFIG */ > +#define SDRAM_TYPE_SHIFT 29 > +#define SDRAM_TYPE_MASK (0x7 << 29) > +#define IBANK_POS_SHIFT 27 > +#define IBANK_POS_MASK (0x3 << 27) > +#define DDR_TERM_SHIFT 24 > +#define DDR_TERM_MASK (0x7 << 24) > +#define DDR2_DDQS_SHIFT 23 > +#define DDR2_DDQS_MASK (1 << 23) > +#define DYN_ODT_SHIFT 21 > +#define DYN_ODT_MASK (0x3 << 21) > +#define DDR_DISABLE_DLL_SHIFT 20 > +#define DDR_DISABLE_DLL_MASK (1 << 20) > +#define SDRAM_DRIVE_SHIFT 18 > +#define SDRAM_DRIVE_MASK (0x3 << 18) > +#define CWL_SHIFT 16 > +#define CWL_MASK (0x3 << 16) > +#define NARROW_MODE_SHIFT 14 > +#define NARROW_MODE_MASK (0x3 << 14) > +#define CL_SHIFT 10 > +#define CL_MASK (0xf << 10) > +#define ROWSIZE_SHIFT 7 > +#define ROWSIZE_MASK (0x7 << 7) > +#define IBANK_SHIFT 4 > +#define IBANK_MASK (0x7 << 4) > +#define EBANK_SHIFT 3 > +#define EBANK_MASK (1 << 3) > +#define PAGESIZE_SHIFT 0 > +#define PAGESIZE_MASK (0x7 << 0) > + > +/* SDRAM_CONFIG_2 */ > +#define CS1NVMEN_SHIFT 30 > +#define CS1NVMEN_MASK (1 << 30) > +#define EBANK_POS_SHIFT 27 > +#define EBANK_POS_MASK (1 << 27) > +#define RDBNUM_SHIFT 4 > +#define RDBNUM_MASK (0x3 << 4) > +#define RDBSIZE_SHIFT 0 > +#define RDBSIZE_MASK (0x7 << 0) > + > +/* SDRAM_REFRESH_CONTROL */ > +#define INITREF_DIS_SHIFT 31 > +#define INITREF_DIS_MASK (1 << 31) > +#define SRT_SHIFT 29 > +#define SRT_MASK (1 << 29) > +#define ASR_SHIFT 28 > +#define ASR_MASK (1 << 28) > +#define PASR_SHIFT 24 > +#define PASR_MASK (0x7 << 24) > +#define REFRESH_RATE_SHIFT 0 > +#define REFRESH_RATE_MASK (0xffff << 0) > + > +/* SDRAM_TIMING_1 */ > +#define T_RTW_SHIFT 29 > +#define T_RTW_MASK (0x7 << 29) > +#define T_RP_SHIFT 25 > +#define T_RP_MASK (0xf << 25) > +#define T_RCD_SHIFT 21 > +#define T_RCD_MASK (0xf << 21) > +#define T_WR_SHIFT 17 > +#define T_WR_MASK (0xf << 17) > +#define T_RAS_SHIFT 12 > +#define T_RAS_MASK (0x1f << 12) > +#define T_RC_SHIFT 6 > +#define T_RC_MASK (0x3f << 6) > +#define T_RRD_SHIFT 3 > +#define T_RRD_MASK (0x7 << 3) > +#define T_WTR_SHIFT 0 > +#define T_WTR_MASK (0x7 << 0) > + > +/* SDRAM_TIMING_2 */ > +#define T_XP_SHIFT 28 > +#define T_XP_MASK (0x7 << 28) > +#define T_ODT_SHIFT 25 > +#define T_ODT_MASK (0x7 << 25) > +#define T_XSNR_SHIFT 16 > +#define T_XSNR_MASK (0x1ff << 16) > +#define T_XSRD_SHIFT 6 > +#define T_XSRD_MASK (0x3ff << 6) > +#define T_RTP_SHIFT 3 > +#define T_RTP_MASK (0x7 << 3) > +#define T_CKE_SHIFT 0 > +#define T_CKE_MASK (0x7 << 0) > + > +/* SDRAM_TIMING_3 */ > +#define T_PDLL_UL_SHIFT 28 > +#define T_PDLL_UL_MASK (0xf << 28) > +#define T_CSTA_SHIFT 24 > +#define T_CSTA_MASK (0xf << 24) > +#define T_CKESR_SHIFT 21 > +#define T_CKESR_MASK (0x7 << 21) > +#define ZQ_ZQCS_SHIFT 15 > +#define ZQ_ZQCS_MASK (0x3f << 15) > +#define T_TDQSCKMAX_SHIFT 13 > +#define T_TDQSCKMAX_MASK (0x3 << 13) > +#define T_RFC_SHIFT 4 > +#define T_RFC_MASK (0x1ff << 4) > +#define T_RAS_MAX_SHIFT 0 > +#define T_RAS_MAX_MASK (0xf << 0) > + > +/* POWER_MANAGEMENT_CONTROL */ > +#define PD_TIM_SHIFT 12 > +#define PD_TIM_MASK (0xf << 12) > +#define DPD_EN_SHIFT 11 > +#define DPD_EN_MASK (1 << 11) > +#define LP_MODE_SHIFT 8 > +#define LP_MODE_MASK (0x7 << 8) > +#define SR_TIM_SHIFT 4 > +#define SR_TIM_MASK (0xf << 4) > +#define CS_TIM_SHIFT 0 > +#define CS_TIM_MASK (0xf << 0) > + > +/* LPDDR2_MODE_REG_DATA */ > +#define VALUE_0_SHIFT 0 > +#define VALUE_0_MASK (0x7f << 0) > + > +/* LPDDR2_MODE_REG_CONFIG */ > +#define CS_SHIFT 31 > +#define CS_MASK (1 << 31) > +#define REFRESH_EN_SHIFT 30 > +#define REFRESH_EN_MASK (1 << 30) > +#define ADDRESS_SHIFT 0 > +#define ADDRESS_MASK (0xff << 0) > + > +/* OCP_CONFIG */ > +#define SYS_THRESH_MAX_SHIFT 24 > +#define SYS_THRESH_MAX_MASK (0xf << 24) > +#define MPU_THRESH_MAX_SHIFT 20 > +#define MPU_THRESH_MAX_MASK (0xf << 20) > +#define LL_THRESH_MAX_SHIFT 16 > +#define LL_THRESH_MAX_MASK (0xf << 16) > + > +/* PERFORMANCE_COUNTER_1 */ > +#define COUNTER1_SHIFT 0 > +#define COUNTER1_MASK (0xffffffff << 0) > + > +/* PERFORMANCE_COUNTER_2 */ > +#define COUNTER2_SHIFT 0 > +#define COUNTER2_MASK (0xffffffff << 0) > + > +/* PERFORMANCE_COUNTER_CONFIG */ > +#define CNTR2_MCONNID_EN_SHIFT 31 > +#define CNTR2_MCONNID_EN_MASK (1 << 31) > +#define CNTR2_REGION_EN_SHIFT 30 > +#define CNTR2_REGION_EN_MASK (1 << 30) > +#define CNTR2_CFG_SHIFT 16 > +#define CNTR2_CFG_MASK (0xf << 16) > +#define CNTR1_MCONNID_EN_SHIFT 15 > +#define CNTR1_MCONNID_EN_MASK (1 << 15) > +#define CNTR1_REGION_EN_SHIFT 14 > +#define CNTR1_REGION_EN_MASK (1 << 14) > +#define CNTR1_CFG_SHIFT 0 > +#define CNTR1_CFG_MASK (0xf << 0) > + > +/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */ > +#define MCONNID2_SHIFT 24 > +#define MCONNID2_MASK (0xff << 24) > +#define REGION_SEL2_SHIFT 16 > +#define REGION_SEL2_MASK (0x3 << 16) > +#define MCONNID1_SHIFT 8 > +#define MCONNID1_MASK (0xff << 8) > +#define REGION_SEL1_SHIFT 0 > +#define REGION_SEL1_MASK (0x3 << 0) > + > +/* PERFORMANCE_COUNTER_TIME */ > +#define TOTAL_TIME_SHIFT 0 > +#define TOTAL_TIME_MASK (0xffffffff << 0) > + > +/* DLL_CALIB_CTRL */ > +#define ACK_WAIT_SHIFT 16 > +#define ACK_WAIT_MASK (0xf << 16) > +#define DLL_CALIB_INTERVAL_SHIFT 0 > +#define DLL_CALIB_INTERVAL_MASK (0x1ff << 0) > + > +/* END_OF_INTERRUPT */ > +#define EOI_SHIFT 0 > +#define EOI_MASK (1 << 0) > + > +/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */ > +#define DNV_SYS_SHIFT 2 > +#define DNV_SYS_MASK (1 << 2) > +#define TA_SYS_SHIFT 1 > +#define TA_SYS_MASK (1 << 1) > +#define ERR_SYS_SHIFT 0 > +#define ERR_SYS_MASK (1 << 0) > + > +/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */ > +#define DNV_LL_SHIFT 2 > +#define DNV_LL_MASK (1 << 2) > +#define TA_LL_SHIFT 1 > +#define TA_LL_MASK (1 << 1) > +#define ERR_LL_SHIFT 0 > +#define ERR_LL_MASK (1 << 0) > + > +/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */ > +#define EN_DNV_SYS_SHIFT 2 > +#define EN_DNV_SYS_MASK (1 << 2) > +#define EN_TA_SYS_SHIFT 1 > +#define EN_TA_SYS_MASK (1 << 1) > +#define EN_ERR_SYS_SHIFT 0 > +#define EN_ERR_SYS_MASK (1 << 0) > + > +/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */ > +#define EN_DNV_LL_SHIFT 2 > +#define EN_DNV_LL_MASK (1 << 2) > +#define EN_TA_LL_SHIFT 1 > +#define EN_TA_LL_MASK (1 << 1) > +#define EN_ERR_LL_SHIFT 0 > +#define EN_ERR_LL_MASK (1 << 0) > + > +/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */ > +#define ZQ_CS1EN_SHIFT 31 > +#define ZQ_CS1EN_MASK (1 << 31) > +#define ZQ_CS0EN_SHIFT 30 > +#define ZQ_CS0EN_MASK (1 << 30) > +#define ZQ_DUALCALEN_SHIFT 29 > +#define ZQ_DUALCALEN_MASK (1 << 29) > +#define ZQ_SFEXITEN_SHIFT 28 > +#define ZQ_SFEXITEN_MASK (1 << 28) > +#define ZQ_ZQINIT_MULT_SHIFT 18 > +#define ZQ_ZQINIT_MULT_MASK (0x3 << 18) > +#define ZQ_ZQCL_MULT_SHIFT 16 > +#define ZQ_ZQCL_MULT_MASK (0x3 << 16) > +#define ZQ_REFINTERVAL_SHIFT 0 > +#define ZQ_REFINTERVAL_MASK (0xffff << 0) > + > +/* TEMPERATURE_ALERT_CONFIG */ > +#define TA_CS1EN_SHIFT 31 > +#define TA_CS1EN_MASK (1 << 31) > +#define TA_CS0EN_SHIFT 30 > +#define TA_CS0EN_MASK (1 << 30) > +#define TA_SFEXITEN_SHIFT 28 > +#define TA_SFEXITEN_MASK (1 << 28) > +#define TA_DEVWDT_SHIFT 26 > +#define TA_DEVWDT_MASK (0x3 << 26) > +#define TA_DEVCNT_SHIFT 24 > +#define TA_DEVCNT_MASK (0x3 << 24) > +#define TA_REFINTERVAL_SHIFT 0 > +#define TA_REFINTERVAL_MASK (0x3fffff << 0) > + > +/* OCP_ERROR_LOG */ > +#define MADDRSPACE_SHIFT 14 > +#define MADDRSPACE_MASK (0x3 << 14) > +#define MBURSTSEQ_SHIFT 11 > +#define MBURSTSEQ_MASK (0x7 << 11) > +#define MCMD_SHIFT 8 > +#define MCMD_MASK (0x7 << 8) > +#define MCONNID_SHIFT 0 > +#define MCONNID_MASK (0xff << 0) > + > +/* DDR_PHY_CTRL_1 - EMIF4D */ > +#define DLL_SLAVE_DLY_CTRL_SHIFT_4D 4 > +#define DLL_SLAVE_DLY_CTRL_MASK_4D (0xFF << 4) > +#define READ_LATENCY_SHIFT_4D 0 > +#define READ_LATENCY_MASK_4D (0xf << 0) > + > +/* DDR_PHY_CTRL_1 - EMIF4D5 */ > +#define DLL_HALF_DELAY_SHIFT_4D5 21 > +#define DLL_HALF_DELAY_MASK_4D5 (1 << 21) > +#define READ_LATENCY_SHIFT_4D5 0 > +#define READ_LATENCY_MASK_4D5 (0x1f << 0) > + > +/* DDR_PHY_CTRL_1_SHDW */ > +#define DDR_PHY_CTRL_1_SHDW_SHIFT 5 > +#define DDR_PHY_CTRL_1_SHDW_MASK (0x7ffffff << 5) > +#define READ_LATENCY_SHDW_SHIFT 0 > +#define READ_LATENCY_SHDW_MASK (0x1f << 0) > + > +#endif /* __TI_EMIF_H */ > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
