From: Felipe Balbi <balbi@xxxxxx> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon@xxxxxx : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@xxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- Changes from v3: * Changed the compatible type to ti,palmas-usb-vid Changes from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index e8704bc..c18ea50 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -460,6 +465,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
