On Sunday 04 August 2013 09:57 PM, Rajendra Nayak wrote: > Changes in v3: > -1- Dropped some clock/dpll framework builds for dra7 > -2- Added all instances of IPs in dtsi file > -3- dtsi does a 'disabled' by default and dts enables as needed > -4- soc_is_dra7xx() based on DT compatible instead of using ID code > > Changes in v2: > -1- Fixed minor changelog details > -2- Dropped the SRAM support patch since we need to move to drivers/misc/sram.c > -3- Added DTS update patches to this series which were earlier posted as > part of the data series (Since they don't have much objections as against the > other in-kernel data files) > -4- Updated the EVM dts file with pin config details for uart/mcspi and i2c > > DRA7xx based SoCs' are high-performance, infotainment application devices, > based on enhanced OMAP architecture integrated on a 28nm > technology. > > The DRA7xx family is composed of DRA75x and DRA74x devices. > The current device for which the patches add support is the > DRA752 SoC. > > Most of the core IPs are similar to those found on the OMAP5 > devices, including the dual cortex-A15 based MPU subsystem, > which has helped quite some reuse from existing OMAP5 support. > > This series contains only core support patches and none of > the PRCM and hwmod data needed for the device to boot. Tony, any chance of this series making it to 3.12? regards, Rajendra > > The bootloader support for the platform is already available > in mainline u-boot. > > The patches posted in this series are available at: > git://github.com/rrnayak/linux.git for-3.12/dra-core-v3 > > The patches (including the ones for in-kernel data) which boot > on dra7xx evm are available at: > t://github.com/rrnayak/linux.git out-of-tree/dra-integrated-v3 > > R Sricharan (8): > ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra > ARM: DRA7: Reuse io tables and add a new .init_early > ARM: DRA7: Resue the clocksource, clockevent support > ARM: DRA7: board-generic: Add basic DT support > ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 > ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board > ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' > ARM: DRA7: Add the build support in omap2plus > > Rajendra Nayak (1): > ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 > > .../devicetree/bindings/arm/omap/omap.txt | 3 + > arch/arm/Kconfig | 2 +- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/dra7-evm.dts | 140 +++++ > arch/arm/boot/dts/dra7.dtsi | 567 ++++++++++++++++++++ > arch/arm/configs/omap2plus_defconfig | 1 + > arch/arm/mach-omap1/include/mach/soc.h | 1 + > arch/arm/mach-omap2/Kconfig | 12 +- > arch/arm/mach-omap2/Makefile | 6 + > arch/arm/mach-omap2/board-generic.c | 18 + > arch/arm/mach-omap2/common.h | 1 + > arch/arm/mach-omap2/id.c | 4 +- > arch/arm/mach-omap2/io.c | 20 +- > arch/arm/mach-omap2/omap54xx.h | 4 + > arch/arm/mach-omap2/omap_hwmod.c | 2 +- > arch/arm/mach-omap2/soc.h | 17 + > arch/arm/mach-omap2/timer.c | 3 +- > arch/arm/plat-omap/Kconfig | 2 +- > 18 files changed, 795 insertions(+), 11 deletions(-) > create mode 100644 arch/arm/boot/dts/dra7-evm.dts > create mode 100644 arch/arm/boot/dts/dra7.dtsi > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
