Hi ! This patchset adds an OMAP SSI driver to the HSI framework. After leaving Nokia Carlos Chinea had no more time to work on this patchset; Thus I tried updating the driver to fix the mentioned issues. I applied the following changes to the last patch from Carlos: * convert driver to use hwmod and add SSI information to hwmod database * convert driver to use runtime_pm * change platform data, so that it forwards the wake_gpio to avoid irq_to_gpio * move the ssi.h and rename to hsi-omap-ssi.h (multiplatform support) The code compiles and is initialized on the RX51. I also verified, that it does not break the boot on my Pandaboard. The driver has been written by Carlos Chinea and has already been sent for public review as part of the HSI framework RFC before: https://lkml.org/lkml/2011/6/10/280 -- Sebastian Sebastian Reichel (3): ARM: OMAP2+: hwmod-data: Add SSI information ARM: OMAP2+: HSI: Introduce OMAP SSI driver ARM: OMAP2+: Add SSI driver configuration arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-rx51-peripherals.c | 10 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 104 ++ arch/arm/mach-omap2/ssi.c | 82 ++ drivers/hsi/Kconfig | 1 + drivers/hsi/Makefile | 1 + drivers/hsi/controllers/Kconfig | 23 + drivers/hsi/controllers/Makefile | 5 + drivers/hsi/controllers/omap_ssi.c | 1879 ++++++++++++++++++++++++++ include/linux/platform_data/hsi-omap-ssi.h | 202 +++ 10 files changed, 2310 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/ssi.c create mode 100644 drivers/hsi/controllers/Kconfig create mode 100644 drivers/hsi/controllers/Makefile create mode 100644 drivers/hsi/controllers/omap_ssi.c create mode 100644 include/linux/platform_data/hsi-omap-ssi.h -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
