Re: [PATCH v2] N900: add device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel,

I finally got released by the aliens. It took longer than expected and beside a small scar on the back of my neck, I feel pretty OK.

I just have few cosmetic comments on top of Javier's ones.

On 11/08/2013 17:02, Javier Martinez Canillas wrote:
Hi Pavel,

some minor comments about your patch below

On Sat, Jul 13, 2013 at 2:17 PM, Pavel Machek <pavel@xxxxxx> wrote:

This adds device tree with neccessary support to boot with functional

Typo----------------------------^

video (on both emulator and real N900 device).

Signed-off-by: Pavel Machek <pavel@xxxxxx>

---

 From v1: Aaro wants just GPLv2, so I did that. I re-enabled parts that
can be enabled on 3.10, and tested it on that kernel.

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f0895c5..1950aed 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
         omap3-devkit8000.dtb \
         omap3-beagle-xm.dtb \
         omap3-evm.dtb \
+       omap3-n900.dtb \
         omap3-tobi.dtb \
         omap3-igep0020.dtb \
         omap3-igep0030.dtb \
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 0000000..fb461bf
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@xxxxxx>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+

The current trend is to use #include "omap34xx.dtsi" instead /include/
in order to use the C pre-processor and the macros defined in
include/dt-bindings.

+/ {
+       model = "Nokia N900";
+       compatible = "nokia,omap3-n900", "ti,omap3";
+
+       cpus {
+               cpu@0 {
+                       cpu0-supply = <&vcc>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x10000000>; /* 256 MB */
+       };
+
+};
+
+&i2c1 {
+       clock-frequency = <2200000>;
+
+       twl: twl@48 {
+               reg = <0x48>;
+               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+               interrupt-parent = <&intc>;
+       };
+};
+
+/include/ "twl4030.dtsi"
+
+&twl_gpio {
+       ti,pullups      = <0x0>;
+       ti,pulldowns    = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+       clock-frequency = <400000>;
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+};
+
+&mmc1 {
+       status = "disabled";
+};
+
+&mmc2 {
+       status = "disabled";
+};
+
+&mmc3 {
+       status = "disabled";
+};
+
+&mcspi1 {
+       // For some reason, touchscreen is neccessary for screen to work at

Same typo than before---------------------------^

+       // all on real hw. It works well without it on emulator.
+       //
+       // Also... order in the device tree actually matters here.

Nit: Please use the regular Linux style comment.

The order should not matter at all in DT, it should be a static representation of the HW, so there is probably something wrong in the code that make the device creation order important.

+       tsc2005@0 {
+               compatible = "tsc2005";
+               spi-max-frequency = <6000000>;
+               reg = <0>;
+       };
+       mipid@2 {
+               compatible = "acx565akm";
+               spi-max-frequency = <6000000>;
+               reg = <2>;
+               // turbo_mode = 0,
+               // cs_per_word = 0
+       };
+};

You should remove these properties if they are not being used instead
of keeping them as commented.

+
+&usb_otg_hs {
+       interface-type = <0>;
+       usb-phy = <&usb2_phy>;
+       mode = <2>;
+       power = <50>;
+};

Beside my comments and the ones from Javier, it looks good.
If you can repost ASAP, I'll take it right after.
It will be the first one in the list.

Thanks,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux