Linux Hardware Monitor

• Thread Index

• [PATCH] hwmon: fix ptr_ret.cocci warnings
  • From: kernel test robot
• Re: [PATCH] hwmon: (pmbus) Stop caching register values
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus) Stop caching register values
  • From: Alex Qiu
• Re: [PATCH 1/2] Add DT bindings schema for PVT controller
  • From: Rob Herring
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Luka Kovačič
• Re: [PATCH] hwmon: (pmbus) Expose PEC debugfs attribute
  • From: Guenter Roeck
• Re: [PATCH 2/2] Add driver for Moortec MR75203 PVT controller
  • From: Guenter Roeck
• Re: [PATCH] hwmon: intel-m10-bmc-hwmon: add hwmon support for Intel MAX 10 BMC
  • From: Guenter Roeck
• [PATCH] hwmon: (pmbus) Expose PEC debugfs attribute
  • From: Andrew Jeffery
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Andy Shevchenko
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Andrew Lunn
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Pavel Machek
• Re: [PATCH 2/2] Add driver for Moortec MR75203 PVT controller
  • From: Andy Shevchenko
• Re: [PATCH 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU
  • From: Lee Jones
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Andy Shevchenko
• Re: [PATCH v9 11/13] arm64: dts: freescale: sl28: enable LED support
  • From: Pavel Machek
• Re: [PATCH V7] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [PATCH 2/2] Add driver for Moortec MR75203 PVT controller
  • From: Rahul Tanwar
• [PATCH 0/2] Add driver for Moortec PVT controller
  • From: Rahul Tanwar
• [PATCH 1/2] Add DT bindings schema for PVT controller
  • From: Rahul Tanwar
• Re: [PATCH 00/29] treewide: Convert comma separated statements
  • From: Martin K. Petersen
• Re: [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Pavel Machek
• Re: [PATCH] hwmon: intel-m10-bmc-hwmon: add hwmon support for Intel MAX 10 BMC
  • From: Guenter Roeck
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Naveen Krishna Ch
• [PATCH] hwmon: (k10temp) Take out debugfs code
  • From: Guenter Roeck
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Guenter Roeck
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Naveen Krishna Ch
• Re: FW: [PATCH 4/6] hwmon: amd_energy: let user enable/disable the sw accumulation
  • From: Guenter Roeck
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Guenter Roeck
• Re: FW: [PATCH 4/6] hwmon: amd_energy: let user enable/disable the sw accumulation
  • From: Naveen Krishna Ch
• Re: [PATCH V7] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH v9 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v9 00/13] Add support for Kontron sl28cpld
  • From: Lee Jones
• [PATCH] hwmon: intel-m10-bmc-hwmon: add hwmon support for Intel MAX 10 BMC
  • From: Xu Yilun
• [PATCH] add hwmon support for Intel MAX 10 BMC
  • From: Xu Yilun
• Re: [PATCH V7] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• [PATCH v9 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Michael Walle
• [PATCH v9 00/13] Add support for Kontron sl28cpld
  • From: Michael Walle
• [PATCH v9 04/13] irqchip: add sl28cpld interrupt controller support
  • From: Michael Walle
• [PATCH v9 09/13] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle
• [PATCH v9 08/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle
• [PATCH v9 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v9 07/13] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle
• [PATCH v9 11/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• [PATCH v9 13/13] arm64: defconfig: enable the sl28cpld board management controller
  • From: Michael Walle
• [PATCH v9 10/13] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle
• [PATCH v9 12/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• [PATCH v9 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• [PATCH v9 05/13] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle
• [PATCH v9 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH V7] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH] hwmon: Driver for TI TPS2483 hotswap controller
  • From: Guenter Roeck
• [PATCH] hwmon: Driver for TI TPS2483 hotswap controller
  • From: Philby John
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Guenter Roeck
• Re: FW: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Naveen Krishna Ch
• Re: FW: [PATCH 3/6] hwmon: amd_energy: Improve the accumulation logic
  • From: Naveen Krishna Ch
• Re: [PATCH 2/6] hwmon: amd_energy: optimize accumulation interval
  • From: Naveen Krishna Ch
• Re: [PATCH 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU
  • From: Randy Dunlap
• Re: [PATCH 4/6] hwmon: amd_energy: let user enable/disable the sw accumulation
  • From: Guenter Roeck
• Re: [PATCH 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
  • From: Guenter Roeck
• Re: [PATCH 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board
  • From: Andrew Lunn
• Re: [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Guenter Roeck
• Re: [PATCH 4/6] hwmon: amd_energy: let user enable/disable the sw accumulation
  • From: Guenter Roeck
• Re: [PATCH 3/6] hwmon: amd_energy: Improve the accumulation logic
  • From: Guenter Roeck
• Re: [PATCH 2/6] hwmon: amd_energy: optimize accumulation interval
  • From: Guenter Roeck
• [hwmon:hwmon] BUILD SUCCESS d50e0d75000410249090297ca55ee895f518ee27
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 3f73dc9deb13f6a15ad8720b00cd91abc3846643
  • From: kernel test robot
• [PATCH 6/6] hwmon: (amd_energy) Update driver documentation
  • From: Naveen Krishna Chatradhi
• [PATCH 5/6] hwmon: amd_energy: dump energy counters via debugfs
  • From: Naveen Krishna Chatradhi
• [PATCH 4/6] hwmon: amd_energy: let user enable/disable the sw accumulation
  • From: Naveen Krishna Chatradhi
• [PATCH 3/6] hwmon: amd_energy: Improve the accumulation logic
  • From: Naveen Krishna Chatradhi
• [PATCH 2/6] hwmon: amd_energy: optimize accumulation interval
  • From: Naveen Krishna Chatradhi
• [PATCH 1/6] hwmon: amd_energy: Move label out of accumulation structure
  • From: Naveen Krishna Chatradhi
• [PATCH 0/6] RFC: hwmon: few improvements to amd_energy driver
  • From: Naveen Krishna Chatradhi
• [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation
  • From: Luka Kovacic
• [PATCH 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU
  • From: Luka Kovacic
• [PATCH 6/7] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver
  • From: Luka Kovacic
• [PATCH 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board
  • From: Luka Kovacic
• [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  • From: Luka Kovacic
• [PATCH 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
  • From: Luka Kovacic
• [PATCH 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings
  • From: Luka Kovacic
• [PATCH 0/7] Add support for the iEi Puzzle-M801 board
  • From: Luka Kovacic
• Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
  • From: Guenter Roeck
• [PATCH] hwmon: (pmbus) Stop caching register values
  • From: Guenter Roeck
• Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
  • From: Guenter Roeck
• Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
  • From: Lars Povlsen
• [PATCH] hwmon: sparx5: Fix initial reading of temperature
  • From: Lars Povlsen
• Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
  • From: Guenter Roeck
• [hwmon:hwmon-next] BUILD SUCCESS 33efa9e652f54340e4b483530bfc20952f2d09e6
  • From: kernel test robot
• [hwmon:watchdog-next] BUILD SUCCESS 9bcc726b8f669edc2075bc7a5c3ac29ac28b6e58
  • From: kernel test robot
• Re: [PATCH v3] hwmon (pmbus/max20730): add device monitoring via debugfs
  • From: Guenter Roeck
• [PATCH AUTOSEL 5.8 10/42] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 07/23] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 05/11] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 4/9] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 4.9 2/6] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 2/5] hwmon: (applesmc) check status earlier.
  • From: Sasha Levin
• [PATCH AUTOSEL 5.8 01/42] hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228
  • From: Sasha Levin
• Re: [PATCH] hwmon: replace impossible fallthroughs with breaks
  • From: Guenter Roeck
• [PATCH] hwmon: replace impossible fallthroughs with breaks
  • From: Dan Carpenter
• [hwmon:hwmon-next] BUILD SUCCESS d500048804acce2101dc4a226192823a875ae639
  • From: kernel test robot
• Re: [PATCH v2] hwmon: gsc-hwmon: add fan sensor
  • From: Guenter Roeck
• Re: [GIT PULL] hwmon fixes for v5.9-rc3
  • From: pr-tracker-bot
• [GIT PULL] hwmon fixes for v5.9-rc3
  • From: Guenter Roeck
• [hwmon:hwmon] BUILD SUCCESS c1ae18d313e24bc7833e1749dd36dba5d47f259c
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 97568defeee16fc48e4936787f865d61c6f0f136
  • From: kernel test robot
• [PATCH v3] hwmon (pmbus/max20730): add device monitoring via debugfs
  • From: Ugur Usug
• [PATCH v2] hwmon: gsc-hwmon: add fan sensor
  • From: Tim Harvey
• Re: [PATCH 2/2] hwmon: (k10temp) Define SVI telemetry and current factors for Zen2 CPUs
  • From: Guenter Roeck
• Re: [PATCH 1/2] hwmon: (k10temp) Create common functions and macros for Zen CPU families
  • From: Guenter Roeck
• Re: [PATCH] hwmon: gsc-hwmon: add fan sensor
  • From: Guenter Roeck
• Re: [PATCH] hwmon: gsc-hwmon: scale temperature to millidegrees
  • From: Guenter Roeck
• [PATCH] hwmon: gsc-hwmon: add fan sensor
  • From: Tim Harvey
• [PATCH] hwmon: gsc-hwmon: scale temperature to millidegrees
  • From: Tim Harvey
• [PATCH 2/2] hwmon: (k10temp) Define SVI telemetry and current factors for Zen2 CPUs
  • From: Wei Huang
• [PATCH 1/2] hwmon: (k10temp) Create common functions and macros for Zen CPU families
  • From: Wei Huang
• Re: [PATCH v2] hwmon (pmbus/max20730): add device monitoring via debugfs
  • From: Guenter Roeck
• [PATCH v2] hwmon (pmbus/max20730): add device monitoring via debugfs
  • From: Ugur Usug
• Re: [PATCH 11/29] hwmon: (scmi-hwmon): Avoid comma separated statements
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Wolfram Sang
• [PATCH 00/29] treewide: Convert comma separated statements
  • From: Joe Perches
• [PATCH 11/29] hwmon: (scmi-hwmon): Avoid comma separated statements
  • From: Joe Perches
• [hwmon:hwmon-next] BUILD SUCCESS 314119a5380374a2a1c1edbc7e0a055ee1e3f2fb
  • From: kernel test robot
• Re: [PATCH] [PATCH] hwmon/pmbus/delta:new driver for Delta modules Q54SJ108A2 The driver is used for Q54SJ108A2 series of Delta. Signed-off-by: xiao.mx.ma <734056705@xxxxxx>
  • From: Guenter Roeck
• [hwmon:hwmon-next] BUILD SUCCESS caf074d22f8fd7801ee27518ebe1c3f8b5d219a4
  • From: kernel test robot
• Re: [PATCH v8 0/6] hwmon: pmbus: adm1266: add support
  • From: Guenter Roeck
• [PATCH V7] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [hwmon:hwmon-next] BUILD SUCCESS 7f8317b41a6654fd051399659ac748350b7ee561
  • From: kernel test robot
• [hwmon:hwmon] BUILD SUCCESS cecf7560f00a8419396a2ed0f6e5d245ccb4feac
  • From: kernel test robot
• Re: [PATCH v8 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml
  • From: Guenter Roeck
• Re: [PATCH v8 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Guenter Roeck
• Re: [PATCH] hwmon: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (nct7904) Correct divide by 0
  • From: Guenter Roeck
• Re: [PATCH] hwmon: pwm-fan: Use dev_err_probe() to simplify error handling
  • From: Guenter Roeck
• Re: [PATCH] hwmon: applesmc: check status earlier.
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (dme1737) use simple i2c probe
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (f75375s) use simple i2c probe
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (tmp513) use simple i2c probe
  • From: Guenter Roeck
• [PATCH] hwmon: (dme1737) use simple i2c probe
  • From: Stephen Kitt
• [PATCH] hwmon: use simple i2c probe function
  • From: Stephen Kitt
• [PATCH] hwmon: (nct7904) Correct divide by 0
  • From: Jason Baron
• [PATCH] hwmon: (tmp513) use simple i2c probe
  • From: Stephen Kitt
• [PATCH] hwmon: (f75375s) use simple i2c probe
  • From: Stephen Kitt
• Re: [PATCH] drivers/hwmon/adm1177.c: use simple i2c probe
  • From: Guenter Roeck
• Re: [PATCH] drivers/hwmon/adm1177.c: use simple i2c probe
  • From: Stephen Kitt
• Re: [PATCH] hwmon: applesmc: check status earlier.
  • From: Henrik Rydberg
• [PATCH] hwmon: applesmc: check status earlier.
  • From: trix
• Re: [PATCH v8 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Lee Jones
• Re: [PATCH v8 01/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH] [PATCH] hwmon/pmbus/Q54SJ108A2: new driver for Delta modules Q54SJ108A2
  • From: Guenter Roeck
• [hwmon:watchdog-next] BUILD SUCCESS af70dd938c68cda565af626fdb2db8d72cb64855
  • From: kernel test robot
• [hwmon:hwmon] BUILD SUCCESS 51fb91ed5a6fa855a74731610cd5435d83d6e17f
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 4f31c8c48312dad01ce36a3eb993709bed6651b4
  • From: kernel test robot
• Re: [PATCH v2] hwmon: corsair-cpro: fix ccp_probe, add delay [HID related]
  • From: Jiri Kosina
• Re: [PATCH v2] hwmon: corsair-cpro: fix ccp_probe, add delay [HID related]
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: corsair-cpro: fix ccp_probe, add delay [HID related]
  • From: Marius Zachmann
• Re: [PATCH v8 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml
  • From: Rob Herring
• Re: [PATCH v2] hwmon: corsair-cpro: fix ccp_probe, add delay [HID related]
  • From: Guenter Roeck
• Re: [PATCH] drivers/hwmon/adm1029.c: use simple i2c probe
  • From: Corentin Labbe
• [PATCH] hwmon: pwm-fan: Use dev_err_probe() to simplify error handling
  • From: Anson Huang
• [PATCH v2] hwmon: corsair-cpro: fix ccp_probe, add delay
  • From: Marius Zachmann
• [PATCH] hwmon: corsair-cpro: fix ccp_probe, add delay
  • From: Marius Zachmann
• Re: [PATCH V6] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V6] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• [PATCH V6] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V5] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• Re: [PATCH V5] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V5] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• [PATCH V5] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: kernel test robot
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Jonathan Cameron
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• [PATCH v8 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v8 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v8 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Barnabás Pőcze
• [PATCH V3] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Luca Ceresoli
• Re: [PATCH] drivers/hwmon/adm1177.c: use simple i2c probe
  • From: Guenter Roeck
• Re: [PATCH] hwmon: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Rob Herring
• Re: [PATCH] drivers/hwmon/adm1029.c: use simple i2c probe
  • From: Corentin Labbe
• [PATCH] drivers/hwmon/adm1029.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/ltc2947-i2c.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/w83793.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/adm1177.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/emc2103.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/lm73.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/asc7621.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] drivers/hwmon/w83791d.c: use simple i2c probe
  • From: Stephen Kitt
• [PATCH] hwmon: use simple i2c probe function
  • From: Stephen Kitt
• [PATCH v8 00/13] Add support for Kontron sl28cpld
  • From: Michael Walle
• [PATCH v8 04/13] irqchip: add sl28cpld interrupt controller support
  • From: Michael Walle
• [PATCH v8 05/13] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle
• [PATCH v8 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v8 08/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle
• [PATCH v8 11/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• [PATCH v8 07/13] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle
• [PATCH v8 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• [PATCH v8 09/13] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle
• [PATCH v8 10/13] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle
• [PATCH v8 13/13] arm64: defconfig: enable the sl28cpld board management controller
  • From: Michael Walle
• [PATCH v8 12/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• [PATCH v8 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Michael Walle
• [PATCH v8 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Luca Ceresoli
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Lee Jones
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Geert Uytterhoeven
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Rob Herring
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Rob Herring
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Joe Perches
• Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
  • From: Sam Ravnborg
• Re: [PATCH v7 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml
  • From: Rob Herring
• Re: [PATCH v8 6/6] dt-bindings: hwmon: Add bindings for ADM1266
  • From: Rob Herring
• [PATCH v8 2/6] hwmon: pmbus: adm1266: Add Block process call
  • From: alexandru.tachici
• [PATCH v8 1/6] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• [PATCH v8 3/6] hwmon: pmbus: adm1266: Add support for GPIOs
  • From: alexandru.tachici
• [PATCH v8 0/6] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• [PATCH v8 5/6] hwmon: pmbus: adm1266: read blackbox
  • From: alexandru.tachici
• [PATCH v8 4/6] hwmon: pmbus: adm1266: add debugfs for states
  • From: alexandru.tachici
• [PATCH v8 6/6] dt-bindings: hwmon: Add bindings for ADM1266
  • From: alexandru.tachici
• [PATCH] hwmon: (drivetemp) Add usage not describing impact on drive spin-down
  • From: Guenter Roeck
• Re: [PATCH v5] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH v5] hwmon/pmbus: use simple i2c probe function
  • From: Wolfram Sang
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Lee Jones
• Re: [PATCH 0/3] Extending hwmon ABI with attributes for rated values
  • From: zlukwins
• Re: WARNING: ODEBUG bug in put_device
  • From: syzbot
• [PATCH v5] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v4] hwmon/pmbus: use simple i2c probe function
  • From: kernel test robot
• [PATCH v4] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v3] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH v3] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v2] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• [PATCH v3] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v3] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v3] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH v7 3/9] hwmon: pmbus: adm1266: Add support for GPIOs
  • From: Guenter Roeck
• Re: [PATCH v7 5/9] hwmon: pmbus: adm1266: read blackbox
  • From: Guenter Roeck
• Re: [PATCH 0/3] Extending hwmon ABI with attributes for rated values
  • From: Guenter Roeck
• Re: [PATCH v7 8/9] hwmon: pmbus: adm1266: program configuration
  • From: Guenter Roeck
• Re: [PATCH v7 7/9] hwmon: pmbus: adm1266: program firmware
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v2] hwmon/pmbus: use simple i2c probe function
  • From: Wolfram Sang
• [PATCH v2] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• [PATCH v7 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v7 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v7 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH v6 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: kernel test robot
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: kernel test robot
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Stephen Kitt
• Re: [PATCH] hwmon/pmbus: use simple i2c probe function
  • From: Guenter Roeck
• [PATCH v2 22/41] ARM: s3c: adc: move header to linux/soc/samsung
  • From: Krzysztof Kozlowski
• Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [GIT PULL] hwmon updates for v5.9
  • From: pr-tracker-bot
• Re: [PATCH v7 2/9] hwmon: pmbus: adm1266: Add Block process call
  • From: Dan Carpenter
• [hwmon:hwmon-next] BUILD SUCCESS e2f75e6b5d766195d2ca584d92995a0dfe467fc7
  • From: kernel test robot
• [GIT PULL] hwmon updates for v5.9
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (adc128d818) Fix advanced configuration register init
  • From: Guenter Roeck
• Re: [PATCH] hwmon: axi-fan-control: remove duplicate macros
  • From: Guenter Roeck
• Re: [RFC PATCH 10/17] hwmon: Drop uses of pci_read_config_*() return value
  • From: Guenter Roeck
• Re: hwmon: (sis5595) potential null pointer dereference in probe
  • From: Evgeny Novikov
• Re: hwmon: (sis5595) potential null pointer dereference in probe
  • From: Guenter Roeck
• hwmon: (sis5595) potential null pointer dereference in probe
  • From: Evgeny Novikov
• [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v7 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• [PATCH v7 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• [PATCH v7 00/13] Add support for Kontron sl28cpld
  • From: Michael Walle
• [PATCH v7 05/13] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle
• [PATCH v7 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Michael Walle
• [PATCH v7 04/13] irqchip: add sl28cpld interrupt controller support
  • From: Michael Walle
• [PATCH v7 11/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• [PATCH v7 08/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle
• [PATCH v7 09/13] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle
• [PATCH v7 07/13] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle
• [PATCH v7 13/13] arm64: defconfig: enable the sl28cpld board management controller
  • From: Michael Walle
• [PATCH v7 12/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• [PATCH v7 10/13] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Christoph Hellwig
• [PATCH] hwmon: axi-fan-control: remove duplicate macros
  • From: Alexandru Ardelean
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Borislav Petkov
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Bjorn Helgaas
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Borislav Petkov
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Saheed Bolarinwa
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Tom Rix
• Re: [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Borislav Petkov
• [RFC PATCH 10/17] hwmon: Drop uses of pci_read_config_*() return value
  • From: Saheed O. Bolarinwa
• [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value
  • From: Saheed O. Bolarinwa
• [PATCH 3/3] hwmon: (pmbus/core) Add support for rated attributes
  • From: Zbigniew Lukwinski
• [PATCH 2/3] hwmon: (core) Add support for rated attributes
  • From: Zbigniew Lukwinski
• [PATCH 1/3] docs: hwmon: Add attributes to report rated values
  • From: Zbigniew Lukwinski
• [PATCH 0/3] Extending hwmon ABI with attributes for rated values
  • From: Zbigniew Lukwinski
• [PATCH] hwmon: (adc128d818) Fix advanced configuration register init
  • From: Roy van Doormaal
• Re: [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Lee Jones
• Re: [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Lee Jones
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Lee Jones
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• Re: [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Lee Jones
• Re: [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• Re: [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH v6 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Lee Jones
• Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Lee Jones
• Re: [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• [PATCH v7 0/9] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• [PATCH v7 4/9] hwmon: pmbus: adm1266: add debugfs for states
  • From: alexandru.tachici
• [PATCH v7 8/9] hwmon: pmbus: adm1266: program configuration
  • From: alexandru.tachici
• [PATCH v7 2/9] hwmon: pmbus: adm1266: Add Block process call
  • From: alexandru.tachici
• [PATCH v7 3/9] hwmon: pmbus: adm1266: Add support for GPIOs
  • From: alexandru.tachici
• [PATCH v7 5/9] hwmon: pmbus: adm1266: read blackbox
  • From: alexandru.tachici
• [PATCH v7 1/9] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• [PATCH v7 9/9] dt-bindings: hwmon: Add bindings for ADM1266
  • From: alexandru.tachici
• [PATCH v7 7/9] hwmon: pmbus: adm1266: program firmware
  • From: alexandru.tachici
• [PATCH v7 6/9] hwmon: pmbus: adm1266: Add group command support
  • From: alexandru.tachici
• Re: [PATCH v6 0/9] hwmon: pmbus: adm1266: add support
  • From: Guenter Roeck
• Re: [PATCH] ACPI: Use valid link of ACPI specification
  • From: Rafael J. Wysocki
• [PATCH] ACPI: Use valid link of ACPI specification
  • From: Tiezhu Yang
• Re: [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states
  • From: kernel test robot
• Re: [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Thierry Reding
• [PATCH v6 7/9] hwmon: pmbus: adm1266: program firmware
  • From: alexandru.tachici
• [PATCH v6 9/9] dt-bindings: hwmon: Add bindings for ADM1266
  • From: alexandru.tachici
• [PATCH v6 8/9] hwmon: pmbus: adm1266: program configuration
  • From: alexandru.tachici
• [PATCH v6 6/9] hwmon: pmbus: adm1266: Add group command support
  • From: alexandru.tachici
• [PATCH v6 1/9] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• [PATCH v6 2/9] hwmon: pmbus: adm1266: Add Block process call
  • From: alexandru.tachici
• [PATCH v6 5/9] hwmon: pmbus: adm1266: read blackbox
  • From: alexandru.tachici
• [PATCH v6 3/9] hwmon: pmbus: adm1266: Add support for GPIOs
  • From: alexandru.tachici
• [PATCH v6 4/9] hwmon: pmbus: adm1266: add debugfs for states
  • From: alexandru.tachici
• [PATCH v6 0/9] hwmon: pmbus: adm1266: add support
  • From: alexandru.tachici
• Re: [PATCH v6 08/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Andy Shevchenko
• Re: [PATCH v6 07/13] gpio: add support for the sl28cpld GPIO controller
  • From: Andy Shevchenko
• [PATCH v6 05/13] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle
• [PATCH v6 04/13] irqchip: add sl28cpld interrupt controller support
  • From: Michael Walle
• [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v6 07/13] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle
• [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• [PATCH v6 08/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle
• [PATCH v6 11/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• [PATCH v6 10/13] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle
• [PATCH v6 12/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• [PATCH v6 13/13] arm64: defconfig: enable the sl28cpld board management controller
  • From: Michael Walle
• [PATCH v6 09/13] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle
• [PATCH v6 03/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Michael Walle
• [PATCH v6 01/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• [PATCH v6 00/13] Add support for Kontron sl28cpld
  • From: Michael Walle
• [hwmon:hwmon-next] BUILD SUCCESS 2fdf8f7f086712bbe296d1d4d4049ca88e7a662d
  • From: kernel test robot
• Re: [PATCH -next] hwmon (pmbus/max20730): Whitespace cleanups in max20730.c
  • From: Guenter Roeck
• Re: [PATCH -next] hwmon (pmbus/max20730): Whitespace cleanups in max20730.c
  • From: Guenter Roeck
• [PATCH -next] hwmon (pmbus/max20730): Whitespace cleanups in max20730.c
  • From: Wang ShaoBo
• [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [hwmon:hwmon-next] BUILD SUCCESS d653fb84aa5cc7095b816da30cfc2d68fe5101a4
  • From: kernel test robot
• RE: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Xia, Hui
• Re: Maximum rate value of input power for pmbus device
  • From: Guenter Roeck
• Re: Maximum rate value of input power for pmbus device
  • From: zlukwins
• Re: [PATCH -next] hwmon: sparx5: Make symbol 's5_temp_match' static
  • From: Guenter Roeck
• [PATCH -next] hwmon: sparx5: Make symbol 's5_temp_match' static
  • From: Wei Yongjun
• Re: [PATCH] hwmon: corsair-cpro: add reading pwm values
  • From: Guenter Roeck
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [PATCH] hwmon: corsair-cpro: add reading pwm values
  • From: Marius Zachmann
• Re: [PATCH v2] dt-bindings: thermal: Get rid of thermal.txt and replace references
  • From: Daniel Lezcano
• [PATCH v3] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278
  • From: Chu Lin
• [PATCH v3] dt-bindings: hwmon: adm1272: add analog,temp1-enable binding
  • From: Chu Lin
• Re: [PATCH v2] dt-bindings: thermal: Get rid of thermal.txt and replace references
  • From: Viresh Kumar
• Re: [PATCH v2] dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Rob Herring
• [PATCH AUTOSEL 5.7 15/40] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
  • From: Sasha Levin
• [PATCH AUTOSEL 5.7 25/40] hwmon: (adm1275) Make sure we are reading enough data for different chips
  • From: Sasha Levin
• [PATCH AUTOSEL 5.7 28/40] hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
  • From: Sasha Levin
• [PATCH AUTOSEL 5.7 31/40] hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 20/34] hwmon: (adm1275) Make sure we are reading enough data for different chips
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 23/34] hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 15/19] hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 14/19] hwmon: (adm1275) Make sure we are reading enough data for different chips
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 07/13] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 09/19] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 26/34] hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 10/34] hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
  • From: Sasha Levin
• [PATCH v2] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278
  • From: Chu Lin
• [PATCH v2] dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding
  • From: Chu Lin
• [hwmon:watchdog-next] BUILD SUCCESS 9181853812d4eaa8eade9e38ec5c3b38fe3fff79
  • From: kernel test robot
• Re: [PATCH 2/3] fsi: occ: Add support for P10
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: thermal: Get rid of thermal.txt and replace references
  • From: Amit Kucheria
• [PATCH] dt-bindings: thermal: Get rid of thermal.txt and replace references
  • From: Amit Kucheria
• Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH 2/3] fsi: occ: Add support for P10
  • From: Joel Stanley
• Re: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Chu Lin
• Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• Re: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Guenter Roeck
• Re: [PATCH 2/3] fsi: occ: Add support for P10
  • From: Guenter Roeck
• Re: [PATCH for v5.9] docs: hwmon: Replace HTTP links with HTTPS ones
  • From: Guenter Roeck
• [PATCH for v5.9] hwmon: (tmp401) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (lm95234) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (lm90) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (k8temp) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (jc42) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (ina2xx) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: (ina209) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] hwmon: Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [PATCH for v5.9] docs: hwmon: Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [hwmon:hwmon-next] BUILD SUCCESS a346ff429dd1e89bdd9b266d1025a982fca79ea5
  • From: kernel test robot
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [hwmon:hwmon] BUILD SUCCESS c66ef39eb27fe123ee05082b90eb2985c33c7715
  • From: kernel test robot
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: kernel test robot
• Re: [GIT PULL] hwmon fixes for v5.8-rc6
  • From: pr-tracker-bot
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [GIT PULL] hwmon fixes for v5.8-rc6
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (adm1025) Replace HTTP links with HTTPS ones
  • From: Guenter Roeck
• Re: [PATCH v3] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Guenter Roeck
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• [PATCH v3] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Maciej S. Szmigiero
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: kernel test robot
• Re: [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• hwmon: (xgene) missing iounmap() and memunmap()
  • From: Evgeny Novikov
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Lee Jones
• Re: [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support
  • From: Pavel Machek
• [hwmon:hwmon-next] BUILD SUCCESS 1be223e3c7b1ee0ab88b28f0cffbd4ec7a20c302
  • From: kernel test robot
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• [hwmon:hwmon] BUILD SUCCESS 3ce17cd2b94907f6d91b81b32848044b84c97606
  • From: kernel test robot
• Re: [PATCH v3] hwmon: corsair-cpro: Change to HID driver
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: hwmon: Correct vendor for mcp980x
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: hwmon: Correct vendor for mcp980x
  • From: Guenter Roeck
• Re: [PATCH] dt-bindings: hwmon: Correct vendor for mcp980x
  • From: Rob Herring
• Re: [PATCH] dt-bindings: hwmon: Correct vendor for mcp980x
  • From: Rob Herring
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v3] hwmon: corsair-cpro: Change to HID driver
  • From: Marius Zachmann
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Marius Zachmann
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Marius Zachmann
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Marius Zachmann
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Cristian Marussi
• Re: [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Sudeep Holla
• Re: [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Guenter Roeck
• [PATCH v2] hwmon: corsair-cpro: Change to HID driver
  • From: Marius Zachmann
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Guenter Roeck
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH] hwmon: corsair-cpro: Change to hid driver
  • From: Guenter Roeck
• Re: [PATCH] hwmon: corsair-cpro: Change to hid driver
  • From: Guenter Roeck
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Guenter Roeck
• Re: [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Sudeep Holla
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Marius Zachmann
• [RESEND][PATCH] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe()
  • From: Cristian Marussi
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Greg KH
• Re: [PATCH] hwmon: corsair-cpro: Change to hid driver
  • From: Marius Zachmann
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: Guenter Roeck
• Re: [PATCH] hwmon: corsair-cpro: Change to hid driver
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Alexey Galakhov
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Alexey Galakhov
• Re: [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: kernel test robot
• [PATCH] hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Guenter Roeck
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Maciej S. Szmigiero
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: jaap aarts
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Stefan Dietrich
• Re: [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Guenter Roeck
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Maciej S. Szmigiero
• Re: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Guenter Roeck
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH] hwmon: corsair-cpro: Change to hid driver
  • From: Marius Zachmann
• [PATCH] hwmon: add fan/pwm driver for corsair h100i platinum
  • From: jaap aarts
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: jaap aarts
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: Greg KH
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Guenter Roeck
• Re: [RFC PATCH 17/35] hwmon: (sis5595) Tidy Success/Failure checks
  • From: Guenter Roeck
• Re: [RFC PATCH 16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0
  • From: Guenter Roeck
• Re: [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: Guenter Roeck
• [PATCH 6/6] added some comments and fixed some styling
  • From: jaap aarts
• [PATCH 5/6] allow setting enable instead of mode, and support enable 2/3/4
  • From: jaap aarts
• [PATCH 4/6] automatic fan count detection
  • From: jaap aarts
• [PATCH 3/6] rpm support for asetek gen 6 driver
  • From: jaap aarts
• [PATCH 2/6] fan support for asetek gen 6 driver
  • From: jaap aarts
• [PATCH 1/6] skeleton for asetek gen 6 driver
  • From: jaap aarts
• Re: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Chu Lin
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Stefan Dietrich
• Re: [PATCH v5 03/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Rob Herring
• Re: [PATCH v6 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Rob Herring
• [PATCH] hwmon: (adm1025) Replace HTTP links with HTTPS ones
  • From: Alexander A. Klimov
• [RFC PATCH 16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0
  • From: Saheed O. Bolarinwa
• [RFC PATCH 17/35] hwmon: (sis5595) Tidy Success/Failure checks
  • From: Saheed O. Bolarinwa
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• Re: [PATCH v6 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v6 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v6 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v6 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Maciej S. Szmigiero
• Re: [PATCH] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Guenter Roeck
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  • From: Maciej S. Szmigiero
• Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Rob Herring
• Re: [PATCH v2 4/6] devres: handle zero size in devm_kmalloc()
  • From: Jon Hunter
• Re: [PATCH v2 4/6] devres: handle zero size in devm_kmalloc()
  • From: Bartosz Golaszewski
• Re: [PATCH v2 4/6] devres: handle zero size in devm_kmalloc()
  • From: Jon Hunter
• Re: [PATCH v2 4/6] devres: handle zero size in devm_kmalloc()
  • From: Bartosz Golaszewski
• Re: [PATCH v2 4/6] devres: handle zero size in devm_kmalloc()
  • From: Jon Hunter
• Re: [PATCH v2 5/6] devres: provide devm_krealloc()
  • From: Greg Kroah-Hartman
• [hwmon:hwmon] BUILD SUCCESS 6d1d41c075a1a54ba03370e268171fec20e06563
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 7117b8140b4bbc9850c3c47a71342aec1867a55a
  • From: kernel test robot
• [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v5 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v5 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH v4 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278
  • From: Chu Lin
• [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
  • From: Chu Lin
• Re: [PATCH v4 1/3] dt-bindings: hwmon: Add Sparx5 temperature sensor
  • From: Rob Herring
• Re: [PATCH v5 7/7] dt-bindings: hwmon: Add bindings for ADM1266
  • From: Rob Herring
• Re: [PATCH v4 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Rob Herring
• Re: [PATCH v4 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Rob Herring
• Re: [PATCH v2] hwmon: corsair-cpro: add fan_target
  • From: Guenter Roeck
• [PATCH v2] hwmon: corsair-cpro: add fan_target
  • From: Marius Zachmann
• Re: [PATCH v2] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Guenter Roeck
• Re: [PATCH] hwmon: corsair-cpro: add fan_target
  • From: Guenter Roeck
• [PATCH] hwmon: corsair-cpro: add fan_target
  • From: Marius Zachmann
• Re: [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Uwe Kleine-König
• [PATCH v2] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Chu Lin
• Re: [PATCH] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Guenter Roeck
• Re: [PATCH] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Chu Lin
• Re: [PATCH] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Guenter Roeck
• [PATCH] hwmon: adm1275: Make sure we are reading enough data for different chips
  • From: Chu Lin
• [hwmon:watchdog-next] BUILD SUCCESS f56beec0e46b26bf053b93d857dc9ec343738bf8
  • From: kernel test robot
• Re: Maximum rate value of input power for pmbus device
  • From: Guenter Roeck
• RE: [PATCH V2 1/2] hwmon: pwm-fan: Add profile support and add remove module support
  • From: Sandipan Patra
• Re: Maximum rate value of input power for pmbus device
  • From: zlukwins
• Re: [PATCH v5 01/13] regmap-irq: use fwnode instead of device node in add_irq_chip()
  • From: Mark Brown
• Re: [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support
  • From: Marc Zyngier
• Re: [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• Re: [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support
  • From: Linus Walleij
• Re: [PATCH v5 08/13] gpio: add support for the sl28cpld GPIO controller
  • From: Linus Walleij
• [PATCH v4 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v4 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v4 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Guenter Roeck
• Re: [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• Re: [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [hwmon:hwmon] BUILD SUCCESS 14b0e83dc4f1e52b94acaeb85a18fd7fdd46d2dc
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 92b60138d083634533200fc1e1556dd5b3e052e9
  • From: kernel test robot
• Re: [PATCH v4] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Guenter Roeck
• Re: [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Rob Herring
• [PATCH v4] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• Re: [PATCH] hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
  • From: Guenter Roeck
• [PATCH] hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
  • From: Vishwas M
• Re: [PATCH v7] hwmon: add Corsair Commander Pro driver
  • From: Guenter Roeck
• Re: [PATCH] hwmon: amd_energy: match for supported models
  • From: Guenter Roeck
• Re: [PATCH v3 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Guenter Roeck
• Re: [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Guenter Roeck
• Re: [PATCH v7] hwmon: add Corsair Commander Pro driver
  • From: Benjamin Tissoires
• [hwmon:watchdog-next] BUILD SUCCESS c6b522b0df2be6335e4f22b415e27d3f6709ce82
  • From: kernel test robot
• Re: [PATCH v7] hwmon: add Corsair Commander Pro driver
  • From: Jiri Kosina
• Re: [PATCH v3 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v3 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v3 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH] hwmon: amd_energy: match for supported models
  • From: Naveen Krishna Ch
• Re: [PATCH] hwmon: amd_energy: match for supported models
  • From: Guenter Roeck
• Re: [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Guenter Roeck
• Re: [PATCH v3 0/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Guenter Roeck
• Re: [PATCH v3 1/1] hwmon:max6697: Allows max6581 to create tempX_offset attributes
  • From: Guenter Roeck
• [PATCH v3 1/1] hwmon:max6697: Allows max6581 to create tempX_offset attributes
  • From: Chu Lin
• [PATCH v3 0/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• Re: [PATCH v3 2/2] hwmon:max6697: fixing the type issue where the comparison is always true
  • From: Chu Lin
• Re: [PATCH v3 2/2] hwmon:max6697: fixing the type issue where the comparison is always true
  • From: Guenter Roeck
• [PATCH v3 2/2] hwmon:max6697: fixing the type issue where the comparison is always true
  • From: Chu Lin
• [PATCH v3 1/2] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• [PATCH v3 0/2] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• Re: [PATCH v2 1/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Guenter Roeck
• Re: [PATCH v2 1/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• [PATCH v2 1/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• [PATCH v2 0/1] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• Re: [PATCH] hwmon: amd_energy: match for supported models
  • From: Guenter Roeck
• Re: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Guenter Roeck
• [hwmon:hwmon-next] BUILD SUCCESS a7cdc9f999ce7d0409ae7f7c0ba5886f737eb1c9
  • From: kernel test robot
• [hwmon:hwmon] BUILD SUCCESS bc4071aafcf4d0535ee423b69167696d6c03207d
  • From: kernel test robot
• [PATCH v5 04/13] mfd: simple-mfd-i2c: add sl28cpld support
  • From: Michael Walle
• [PATCH v5 03/13] dt-bindings: mfd: Add bindings for sl28cpld
  • From: Michael Walle
• [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support
  • From: Michael Walle
• [PATCH v5 06/13] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle
• [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle
• [PATCH v5 09/13] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle
• [PATCH v5 08/13] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle
• [PATCH v5 10/13] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle
• [PATCH v5 02/13] mfd: add simple regmap based I2C driver
  • From: Michael Walle
• [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle
• [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle
• [PATCH v5 11/13] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle
• [PATCH v5 01/13] regmap-irq: use fwnode instead of device node in add_irq_chip()
  • From: Michael Walle
• [PATCH v5 00/13] Add support for Kontron sl28cpld
  • From: Michael Walle
• [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset
  • From: Chu Lin
• [hwmon:watchdog-next] BUILD SUCCESS ecd188eeff89191685b651e270bcb6266e658bcf
  • From: kernel test robot
• Re: [PATCH] hwmon: amd_energy: match for supported models
  • From: Naveen Krishna Ch
• [PATCH] hwmon: amd_energy: match for supported models
  • From: Naveen Krishna Chatradhi
• Re: [PATCH v2 5/6] devres: provide devm_krealloc()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 5/6] devres: provide devm_krealloc()
  • From: Bartosz Golaszewski
• Re: [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Stefan Dietrich
• Re: [QUESTION] fan rpm hwmon driver
  • From: Guenter Roeck
• Re: [QUESTION] fan rpm hwmon driver
  • From: Barnabás Pőcze
• Re: [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Guenter Roeck
• Re: [QUESTION] fan rpm hwmon driver
  • From: Guenter Roeck
• Re: hwmon (nct6775): Please fix Invalid temperature source error for NCT6798D
  • From: Stefan Dietrich
• Re: [PATCH 0/5] Documenation: hwmon: eliminate doubled words
  • From: Mike Rapoport
• Re: [QUESTION] fan rpm hwmon driver
  • From: Barnabás Pőcze
• [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• [PATCH v2 0/2] shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Guenter Roeck
• Re: [PATCH 1/2] hwmon: shtc1: add support for device tree bindings
  • From: Chris Ruehl
• Re: [PATCH 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  • From: Chris Ruehl
• Re: [QUESTION] fan rpm hwmon driver
  • From: Guenter Roeck
• Re: [QUESTION] fan rpm hwmon driver
  • From: Barnabás Pőcze
• Re: [QUESTION] fan rpm hwmon driver
  • From: Guenter Roeck
• Re: [QUESTION] fan rpm hwmon driver
  • From: Barnabás Pőcze
• [hwmon:hwmon] BUILD SUCCESS 835a6470db5a96980ec3d4b09ea1a4683e76c2c2
  • From: kernel test robot