On Sun, 12 Jul 2020 12:44:10 +0800, Chris Ruehl wrote: > Add documentation for the newly added DTS support in the shtc1 driver. > To align with the drivers logic to have high precision by default > a boolean sensirion,low_precision is used to switch to low precision. > > Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> > --- > .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:24.13-26: Warning (reg_format): /example-0/i2c1/shtc3@70:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' See https://patchwork.ozlabs.org/patch/1327453 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
