Re: [PATCH 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 05, 2020 at 03:03:36PM +0200, Luka Kovacic wrote:

> +&cp0_mdio {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	status = "okay";
> +
> +	ge_phy2: ethernet-phy@2 {
> +		reg = <0>;

Hi Luka

The value after the @ should be the same as the reg value.
So this should be ge_phy2: ethernet-phy@0

> +	};
> +
> +	ge_phy3: ethernet-phy@3 {
> +		reg = <1>;

And this is:

ge_phy2: ethernet-phy@1

This is a general DT rule, so please check the whole file.

> +&cp0_eth0 {
> +	status = "okay";
> +	phy-mode = "10gbase-r";
> +	phys = <&cp0_comphy4 0>;
> +	local-mac-address = [00 50 43 de ff 00];

Does the bootloader overwrite these with per device MAC addresses?

Looking up this OUI i find:

00:50:43 Marvell Semiconductor, Inc.

I'm not sure you should be using that!

    Andrew



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux