On Wed, Jul 15, 2020 at 05:03:52PM +0200, jaap aarts wrote: > On Wed, 15 Jul 2020 at 16:47, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > > > > On Wed, Jul 15, 2020 at 01:18:58PM +0200, jaap aarts wrote: > > > On Wed, 15 Jul 2020 at 05:07, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > > > > > > > > On Tue, Jul 14, 2020 at 12:03:38PM +0200, jaap aarts wrote: > > > > > Adds fan/pwm support for H1000i platinum. > > > > > Custom temp/fan curves are not supported, however > > > > > the presets found in the proprietary drivers are avaiable. > > > > > > > > > > Signed-off-by: Jaap Aarts <jaap.aarts1@xxxxxxxxx> > > > > > > > > +Marius Zachmann for input. > > > > > > > > Questions: > > > > - Does this really have to be a different driver or can it be merged into > > > > the corsair-cpro driver ? > > > I cannot find this driver at the moment, the only corsair driver I can find > > > is the HID driver. As far as I know all asetek gen 6 products use the same > > > interface. Out of curiosity I contacted asetek to confirm, but other userland > > > drivers have used the same code for all products of previous generations. > > > > - What about HID vs. USB driver ? > > > This is not really a HID. I asked in the kernel newbies mailing list and > > > I was told HWMON is probably the right place. Most of the code is > > > related to HWMON so this seems to be the right place to me as well. > > > > Question is if this identifies itself as HID device. If it does, > > it would either have to be blacklisted in the HID core, or it would > > have to be implemented as hid driver. The latter would be preferred, > > since otherwise a userspace application accessing it directly would > > no longer work. Either case, the driver can and should still reside > > in hwmon; that was not the question. > Thanks for the clarification, lsusb lists bInterfaceClass as 255 or > "Vendor Specific Class", so not as a HID. Ok. Thanks, Guenter
