[PATCH 2/6] fan support for asetek gen 6 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Jaap Aarts <jaap.aarts1@xxxxxxxxxxx>
---
 drivers/hwmon/asetek_gen6.c | 315 +++++++++++++++++++++++++++++++++++-
 1 file changed, 312 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/asetek_gen6.c b/drivers/hwmon/asetek_gen6.c
index 4d530a4cb71d..b82a678717ab 100644
--- a/drivers/hwmon/asetek_gen6.c
+++ b/drivers/hwmon/asetek_gen6.c
@@ -4,7 +4,7 @@
  * Copyright (c) Jaap Aarts 2020
  * 
  * Protocol reverse engineered by audiohacked
- * https://github.com/audiohacked/OpenCorsairLink
+ * https://github.com/audiohacked/OpendriverLink
  */
 
 /*
@@ -45,6 +45,315 @@ struct driver {
 	struct kref kref;
 };
 
+struct curve_point {
+	uint8_t temp;
+	uint8_t pwm;
+};
+
+struct fan_hwmon_data {
+	char fan_channel;
+	long fan_target;
+	unsigned char fan_pwm_target;
+	long mode;
+	struct curve_point curve[7];
+};
+
+struct hwmon_data {
+	struct driver *dev;
+	int channel_count;
+	void **channel_data;
+	int fan_1_index;
+};
+
+struct curve_point default_curve[] = {
+	{
+		.temp = 0x10,
+		.pwm = 0x19,
+	},
+	{
+		.temp = 0x14,
+		.pwm = 0x19,
+	},
+	{
+		.temp = 0x20,
+		.pwm = 0x27,
+	},
+	{
+		.temp = 0x28,
+		.pwm = 0x32,
+	},
+	{
+		.temp = 0x32,
+		.pwm = 0x4b,
+	},
+	{
+		.temp = 0x37,
+		.pwm = 0x5a,
+	},
+	{
+		.temp = 0x3c,
+		.pwm = 0x64,
+	},
+
+};
+
+static const char SUCCESS[2] = { 0x12, 0x34 };
+
+#define SUCCES_LENGTH 3
+
+static bool check_succes(char command, char ret[SUCCES_LENGTH])
+{
+	char success[SUCCES_LENGTH] = { command };
+	strncpy(&success[1], SUCCESS, SUCCES_LENGTH - 1);
+	return strncmp(ret, success, SUCCES_LENGTH) == 0;
+}
+
+int set_fan_target_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+		       long val)
+{
+	int retval;
+	int wrote;
+	int sndpipe = usb_sndbulkpipe(cdev->udev, cdev->bulk_out_endpointAddr);
+	int rcvpipe = usb_rcvbulkpipe(cdev->udev, cdev->bulk_in_endpointAddr);
+
+	char *send_buf = cdev->bulk_out_buffer;
+	char *recv_buf = cdev->bulk_in_buffer;
+
+	fan_data->fan_target = val;
+	fan_data->fan_pwm_target = 0;
+
+	send_buf[0] = 0x43;
+	send_buf[1] = fan_data->fan_channel;
+	send_buf[2] = (fan_data->fan_target >> 8);
+	send_buf[3] = fan_data->fan_target;
+
+	retval = usb_bulk_msg(cdev->udev, sndpipe, send_buf, 4, &wrote, 100);
+	if (retval != 0)
+		return retval;
+
+	retval = usb_bulk_msg(cdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
+	if (retval != 0)
+		return retval;
+
+	//no error
+	if (!check_succes(send_buf[0], recv_buf) ||
+	    recv_buf[3] != fan_data->fan_channel)
+		printk(KERN_INFO "[*] Failled setting fan rpm %d,%d,%d/%d\n",
+		       recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
+	return 0;
+}
+void get_fan_target_rpm(struct fan_hwmon_data *fan_data, long *val)
+{
+	*val = fan_data->fan_target;
+}
+int get_fan_current_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+			long *val)
+{
+	int retval;
+	int wrote;
+	int sndpipe = usb_sndbulkpipe(cdev->udev, cdev->bulk_out_endpointAddr);
+	int rcvpipe = usb_rcvbulkpipe(cdev->udev, cdev->bulk_in_endpointAddr);
+
+	char *send_buf = cdev->bulk_out_buffer;
+	char *recv_buf = cdev->bulk_in_buffer;
+
+	send_buf[0] = 0x41;
+	send_buf[1] = fan_data->fan_channel;
+
+	retval = usb_bulk_msg(cdev->udev, sndpipe, send_buf, 2, &wrote, 100);
+	if (retval != 0)
+		return retval;
+
+	retval = usb_bulk_msg(cdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
+	if (retval != 0)
+		return retval;
+
+	if (!check_succes(0x41, recv_buf) ||
+	    recv_buf[3] != fan_data->fan_channel)
+		printk(KERN_INFO "[*] Failled retreiving fan rmp %d,%d,%d/%d\n",
+		       recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
+
+	*val = (((uint8_t)recv_buf[4]) << 8) + (uint8_t)recv_buf[5];
+	return 0;
+}
+
+umode_t is_visible_func(const void *d, enum hwmon_sensor_types type, u32 attr,
+			int channel)
+{
+	switch (type) {
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			return 0444;
+			break;
+		case hwmon_fan_target:
+			return 0644;
+			break;
+		case hwmon_fan_min:
+			return 0444;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int write_func(struct device *dev, enum hwmon_sensor_types type,
+		      u32 attr, int channel, long val)
+{
+	struct hwmon_data *data = dev_get_drvdata(dev);
+	struct driver *cdev = data->dev;
+	struct fan_hwmon_data *fan_data;
+	int retval = 0;
+
+	switch (type) {
+	case hwmon_fan:;
+		switch (attr) {
+		case hwmon_fan_target:
+			fan_data = data->channel_data[channel];
+
+			retval = usb_autopm_get_interface(cdev->interface);
+			if (retval)
+				goto exit;
+
+			if (down_trylock(&cdev->limit_sem)) {
+				retval = -EAGAIN;
+				goto cleanup_interface;
+			}
+
+			retval = set_fan_target_rpm(cdev, fan_data, val);
+			if (retval)
+				goto cleanup;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+cleanup:
+	up(&cdev->limit_sem);
+cleanup_interface:
+	usb_autopm_put_interface(cdev->interface);
+exit:
+	return retval;
+}
+int read_func(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	      int channel, long *val)
+{
+	struct hwmon_data *data = dev_get_drvdata(dev);
+	struct driver *cdev = data->dev;
+	struct fan_hwmon_data *fan_data;
+	int retval = 0;
+	if (channel >= data->channel_count)
+		return -EAGAIN;
+
+	switch (type) {
+	case hwmon_fan:;
+		switch (attr) {
+		case hwmon_fan_input:
+			fan_data = data->channel_data[channel];
+
+			retval = usb_autopm_get_interface(cdev->interface);
+			if (retval)
+				goto exit;
+
+			if (down_trylock(&cdev->limit_sem)) {
+				retval = -EAGAIN;
+				goto cleanup_interface;
+			}
+
+			retval = get_fan_current_rpm(cdev, fan_data, val);
+			if (retval)
+				goto cleanup;
+
+			break;
+		case hwmon_fan_target:
+			fan_data = data->channel_data[channel];
+
+			get_fan_target_rpm(fan_data, val);
+			break;
+		case hwmon_fan_min:
+			*val = 200;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+cleanup:
+	up(&cdev->limit_sem);
+cleanup_interface:
+	usb_autopm_put_interface(cdev->interface);
+exit:
+	return retval;
+}
+static const struct hwmon_channel_info *dual_fan[] = {
+	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET,
+			   HWMON_F_INPUT | HWMON_F_TARGET),
+	NULL
+};
+
+static const struct hwmon_ops asetek_6_ops = {
+	.is_visible = is_visible_func,
+	.read = read_func,
+	.write = write_func,
+};
+
+static const struct hwmon_chip_info lm75_chip_info = {
+	.ops = &asetek_6_ops,
+	.info = dual_fan,
+};
+
+void hwmon_init(struct driver *dev)
+{
+	struct device *hwmon_dev;
+	struct hwmon_data *data = devm_kzalloc(
+		&dev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL);
+	struct hwmon_chip_info *hwmon_info = devm_kzalloc(
+		&dev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL);
+	struct fan_hwmon_data *fan1 = devm_kzalloc(
+		&dev->udev->dev, sizeof(struct fan_hwmon_data), GFP_KERNEL);
+	struct fan_hwmon_data *fan2 = devm_kzalloc(
+		&dev->udev->dev, sizeof(struct fan_hwmon_data), GFP_KERNEL);
+	data->channel_count = 2; //amount of fans
+	data->channel_data =
+		devm_kzalloc(&dev->udev->dev,
+			     sizeof(char *) * data->channel_count, GFP_KERNEL);
+
+	hwmon_info->ops = &asetek_6_ops;
+	hwmon_info->info = dual_fan;
+
+	fan1->fan_channel = 0;
+	fan1->mode = 2;
+	fan2->fan_channel = 1;
+	fan2->mode = 2;
+
+	data->fan_1_index = 0;
+	data->dev = dev;
+	data->channel_data[0] = fan1;
+	data->channel_data[1] = fan2;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(
+		&dev->udev->dev, "driver_fan", data, hwmon_info, NULL);
+	printk(KERN_INFO "[*] Setup hwmon\n");
+}
+
+void hwmon_deinit(struct driver *dev)
+{
+	hwmon_device_unregister(&dev->udev->dev);
+	printk(KERN_INFO "[*] HWMON DISCONNECT\n");
+}
 /* devices that work with this driver */
 static const struct usb_device_id astk_table[] = {
 	{ USB_DEVICE(0x1b1c, 0x0c15) },
@@ -121,7 +430,7 @@ static int astk_probe(struct usb_interface *interface,
 	dev->bulk_out_buffer = kmalloc(dev->bulk_out_size, GFP_KERNEL);
 	dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
 
-	//hwmon_init(dev);
+	hwmon_init(dev);
 	retval = init_device(dev->udev);
 	if (retval) {
 		dev_err(&interface->dev, "Failled initialising this device.\n");
@@ -139,7 +448,7 @@ static int astk_probe(struct usb_interface *interface,
 static void astk_disconnect(struct usb_interface *interface)
 {
 	struct driver *dev = usb_get_intfdata(interface);
-	//hwmon_deinit(dev);
+	hwmon_deinit(dev);
 	usb_set_intfdata(interface, NULL);
 	kref_put(&dev->kref, astk_delete);
 	deinit_device(dev->udev);
-- 
2.27.0




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux