[PATCH v7 2/2] devicetree: hwmon: shtc1: add sensirion,shtc1.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low_precision is used to switch to low precision.

Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
---
 .../bindings/hwmon/sensirion,shtc1.yaml       | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..41cc59b0b0e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - chris.ruehl@xxxxxxxxxxxx
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refere to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg:
+    const: 0x70
+
+  sensirion,blocking-io:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set, the driver hold the i2c bus until measurement is finished.
+
+  sensirion,low-precision:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set, the sensor aquire data with low precision (not recommended).
+      The driver aquire data with high precision by default.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+
+      shtc3@70 {
+        compatible = "sensirion,shtc3";
+        reg = <0x70>;
+        sensirion,blocking-io;
+      };
+    };
+...
-- 
2.20.1




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux