Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2020-08-10 09:13, schrieb Lee Jones:
On Fri, 07 Aug 2020, Michael Walle wrote:

Hi Uwe, Hi Lee,

Am 2020-08-06 10:40, schrieb Uwe Kleine-König:
> On Mon, Aug 03, 2020 at 11:35:52AM +0200, Michael Walle wrote:
> > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > index 7dbcf6973d33..a0d50d70c3b9 100644
> > --- a/drivers/pwm/Kconfig
> > +++ b/drivers/pwm/Kconfig
> > @@ -428,6 +428,16 @@ config PWM_SIFIVE
> >  	  To compile this driver as a module, choose M here: the module
> >  	  will be called pwm-sifive.
> >
> > +config PWM_SL28CPLD
> > +	tristate "Kontron sl28cpld PWM support"
> > +	select MFD_SIMPLE_MFD_I2C
>
> Is it sensible to present this option to everyone? Maybe
>
> 	depends on SOME_SYMBOL_ONLY_TRUE_ON_SL28CPLD || COMPILE_TEST

Because there is now no real MFD driver anymore, there is also
no symbol for that. The closest would be ARCH_ARM64 but I don't
think that is a good idea.

Lee, what do you think about adding a symbol to the MFD, which
selects MFD_SIMPLE_MFD_I2C but doesn't enable any C modules?

I.e.
config MFD_SL28CPLD
    tristate "Kontron sl28cpld"
    select MFD_SIMPLE_MFD_I2C
    help
      Say yes here to add support for the Kontron sl28cpld board
      management controller.

Then all the other device driver could depend on the MFD_SL28CPLD
symbol.

You want to add a virtual symbol to prevent having to present a real
one?  How is that a reasonable solution?

(1) Its a symbol on which all sl28cpld will depend on. Thus they will
    all be hidden if that is not set.
(2) the drivers itself wouldn't need to depend on MFD_SIMPLE_MFD_I2C,
    which is more correct, because they don't have anything to do with
    i2c.

-michael



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux