Re: [PATCH V2] hwmon: add fan/pwm driver for corsair h100i platinum

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 18 Jul 2020 at 01:15, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 7/17/20 5:16 AM, jaap aarts wrote:
> > Adds fan/pwm support for H100i platinum.
> > Custom temp/fan curves are not supported, however
> > the presets found in the proprietary drivers are available.
> >
> > Signed-off-by: Jaap Aarts <jaap.aarts1@xxxxxxxxx>
>
> Most of my comments have not been addressed.

I replied to your comments, everything I mentioned as fixed/changed
has been addressed in this new patch. You didn't respond to that any
further even though you did reply to my other email. So I thought I
was supposed to just send in v2.

> Change log is missing.

I don't know what you mean, I have a from line, I have a one-line
description of the patch, the email subject just like some other
patches, I have a multi-line description, and a signed-off-by line.
According to the linux docs
(https://www.kernel.org/doc/html/latest/process/5.Posting.html?highlight=changelog#patch-formatting-and-changelogs)
This is what a changelog should be.
If you mean changelog from v1, I mailed about all the fixed/changed
things in this patch. I also send a follow-up email noting that after
some research I found out that this driver should NOT work with
all asetek gen6 based coolers, and that I changed the scope of
the driver to just a single line of corsair products.

> 0-day feedback has not been adressed.

True, I did not fix all of those, I wasn't sure how to take all of them
since it was a long list.
The rest of the 0-day feedback will be fixed next round.

>
> Guenter


>
> > ---
> >  drivers/hwmon/Kconfig               |   6 +
> >  drivers/hwmon/Makefile              |   1 +
> >  drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++
> >  3 files changed, 798 insertions(+)
> >  create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 288ae9f63588..9831a40fb05f 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI
> >         and power sensors available on ARM Ltd's SCP based platforms. The
> >         actual number and type of sensors exported depend on the platform.
> >
> > +config SENSORS_CORSAIR_HYDRO_I_PRO
> > +     tristate "Corsair hydro HXXXi pro driver"
> > +     help
> > +       If you say yes here you get support for the corsair hydro HXXXi pro
> > +       range of devices.
> > +
> >  config SENSORS_ASB100
> >       tristate "Asus ASB100 Bach"
> >       depends on X86 && I2C
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index 3e32c21f5efe..ec63294b3ef1 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793)        += w83793.o
> >  obj-$(CONFIG_SENSORS_W83795) += w83795.o
> >  obj-$(CONFIG_SENSORS_W83781D)        += w83781d.o
> >  obj-$(CONFIG_SENSORS_W83791D)        += w83791d.o
> > +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO)    += corsair_hydro_i_pro.o
> >
> >  obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o
> >  obj-$(CONFIG_SENSORS_ABITUGURU)      += abituguru.o
> > diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c
> > new file mode 100644
> > index 000000000000..43bf52d8d365
> > --- /dev/null
> > +++ b/drivers/hwmon/corsair_hydro_i_pro.c
> > @@ -0,0 +1,791 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers.
> > + * Copyright (c) Jaap Aarts 2020
> > + *
> > + * Protocol reverse engineered by audiohacked
> > + * https://github.com/audiohacked/OpendriverLink
> > + */
> > +
> > +/*
> > + * Supports following liquid coolers:
> > + * H100i platinum
> > + *
> > + * Other products should work with this driver but no testing has been done.
> > + *
> > + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro.
> > + * But some products are actually calles platinum, these are not intended to be supported.
> > + *
> > + * Note: fan curve control has not been implemented
> > + */
> > +#include <linux/errno.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/usb.h>
> > +
> > +struct hydro_i_pro_device {
> > +     struct usb_device *udev;
> > +
> > +     unsigned char *bulk_out_buffer;
> > +     char *bulk_in_buffer;
> > +     size_t bulk_out_size;
> > +     size_t bulk_in_size;
> > +     char bulk_in_endpointAddr;
> > +     char bulk_out_endpointAddr;
> > +
> > +     struct usb_interface *interface; /* the interface for this device */
> > +     struct semaphore
> > +             limit_sem; /* limiting the number of writes in progress */
> > +};
> > +
> > +struct curve_point {
> > +     uint8_t temp;
> > +     uint8_t pwm;
> > +};
> > +
> > +struct hwmon_fan_data {
> > +     char fan_channel;
> > +     long fan_target;
> > +     unsigned char fan_pwm_target;
> > +     long mode;
> > +     struct curve_point curve[7];
> > +};
> > +
> > +struct hwmon_data {
> > +     struct hydro_i_pro_device *hdev;
> > +     int channel_count;
> > +     void **channel_data;
> > +};
> > +
> > +struct curve_point quiet_curve[] = {
> > +     {
> > +             .temp = 0x1F,
> > +             .pwm = 0x15,
> > +     },
> > +     {
> > +             .temp = 0x21,
> > +             .pwm = 0x1E,
> > +     },
> > +     {
> > +             .temp = 0x24,
> > +             .pwm = 0x25,
> > +     },
> > +     {
> > +             .temp = 0x27,
> > +             .pwm = 0x2D,
> > +     },
> > +     {
> > +             .temp = 0x29,
> > +             .pwm = 0x38,
> > +     },
> > +     {
> > +             .temp = 0x2C,
> > +             .pwm = 0x4A,
> > +     },
> > +     {
> > +             .temp = 0x2F,
> > +             .pwm = 0x64,
> > +     },
> > +};
> > +
> > +struct curve_point balanced_curve[] = {
> > +     {
> > +             .temp = 0x1C,
> > +             .pwm = 0x15,
> > +     },
> > +     {
> > +             .temp = 0x1E,
> > +             .pwm = 0x1B,
> > +     },
> > +     {
> > +             .temp = 0x20,
> > +             .pwm = 0x23,
> > +     },
> > +     {
> > +             .temp = 0x22,
> > +             .pwm = 0x28,
> > +     },
> > +     {
> > +             .temp = 0x24,
> > +             .pwm = 0x32,
> > +     },
> > +     {
> > +             .temp = 0x27,
> > +             .pwm = 0x48,
> > +     },
> > +     {
> > +             .temp = 0x29,
> > +             .pwm = 0x64,
> > +     },
> > +};
> > +
> > +struct curve_point extreme_curve[] = {
> > +     {
> > +             .temp = 0x19,
> > +             .pwm = 0x28,
> > +     },
> > +     {
> > +             .temp = 0x1B,
> > +             .pwm = 0x2E,
> > +     },
> > +     {
> > +             .temp = 0x1D,
> > +             .pwm = 0x37,
> > +     },
> > +     {
> > +             .temp = 0x1E,
> > +             .pwm = 0x41,
> > +     },
> > +     {
> > +             .temp = 0x1F,
> > +             .pwm = 0x4C,
> > +     },
> > +     {
> > +             .temp = 0x20,
> > +             .pwm = 0x56,
> > +     },
> > +     {
> > +             .temp = 0x21,
> > +             .pwm = 0x64,
> > +     },
> > +};
> > +
> > +#define default_curve quiet_curve
> > +
> > +enum opcodes {
> > +     PWM_FAN_CURVE_CMD = 0x40,
> > +     PWM_GET_CURRENT_CMD = 0x41,
> > +     PWM_FAN_TARGET_CMD = 0x42,
> > +     RPM_FAN_TARGET_CMD = 0x43,
> > +};
> > +
> > +#define SUCCES_LENGTH 3
> > +#define SUCCES_CODE (0x12, 0x34)
> > +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 };
> > +
> > +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH])
> > +{
> > +     char success[SUCCES_LENGTH] = { command, SUCCES_CODE };
> > +
> > +     return strncmp(ret, success, SUCCES_LENGTH) == 0;
> > +}
> > +
> > +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev,
> > +                   struct hwmon_fan_data *fan_data,
> > +                   struct curve_point point[7])
> > +{
> > +     int retval;
> > +     int wrote;
> > +     int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
> > +     int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
> > +     unsigned char *send_buf = hdev->bulk_out_buffer;
> > +     unsigned char *recv_buf = hdev->bulk_in_buffer;
> > +
> > +     memcpy(fan_data->curve, point, sizeof(fan_data->curve));
> > +
> > +     send_buf[0] = PWM_FAN_CURVE_CMD;
> > +     send_buf[1] = fan_data->fan_channel;
> > +     send_buf[2] = point[0].temp;
> > +     send_buf[3] = point[1].temp;
> > +     send_buf[4] = point[2].temp;
> > +     send_buf[5] = point[3].temp;
> > +     send_buf[6] = point[4].temp;
> > +     send_buf[7] = point[5].temp;
> > +     send_buf[8] = point[6].temp;
> > +     send_buf[9] = point[0].pwm;
> > +     send_buf[10] = point[1].pwm;
> > +     send_buf[11] = point[2].pwm;
> > +     send_buf[12] = point[3].pwm;
> > +     send_buf[13] = point[4].pwm;
> > +     send_buf[14] = point[5].pwm;
> > +     send_buf[15] = point[6].pwm;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     if (!check_succes(send_buf[0], recv_buf)) {
> > +             dev_info(&hdev->udev->dev,
> > +                      "[*] failed setting fan curve %d,%d,%d/%d\n",
> > +                      recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
> > +             return -EINVAL;
> > +     }
> > +     return 0;
> > +}
> > +
> > +int set_fan_target_rpm(struct hydro_i_pro_device *hdev,
> > +                    struct hwmon_fan_data *fan_data, long val)
> > +{
> > +     int retval;
> > +     int wrote;
> > +     int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
> > +     int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
> > +
> > +     unsigned char *send_buf = hdev->bulk_out_buffer;
> > +     unsigned char *recv_buf = hdev->bulk_in_buffer;
> > +
> > +     fan_data->fan_target = val;
> > +     fan_data->fan_pwm_target = 0;
> > +
> > +     send_buf[0] = RPM_FAN_TARGET_CMD;
> > +     send_buf[1] = fan_data->fan_channel;
> > +     send_buf[2] = (fan_data->fan_target >> 8);
> > +     send_buf[3] = fan_data->fan_target;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     if (!check_succes(send_buf[0], recv_buf)) {
> > +             dev_info(&hdev->udev->dev,
> > +                      "[*] failed setting fan rpm %d,%d,%d/%d\n",
> > +                      recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
> > +             return -EINVAL;
> > +     }
> > +     return 0;
> > +}
> > +
> > +int get_fan_current_rpm(struct hydro_i_pro_device *hdev,
> > +                     struct hwmon_fan_data *fan_data, long *val)
> > +{
> > +     int retval;
> > +     int wrote;
> > +     int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
> > +     int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
> > +
> > +     unsigned char *send_buf = hdev->bulk_out_buffer;
> > +     unsigned char *recv_buf = hdev->bulk_in_buffer;
> > +
> > +     send_buf[0] = PWM_GET_CURRENT_CMD;
> > +     send_buf[1] = fan_data->fan_channel;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     if (!check_succes(send_buf[0], recv_buf) ||
> > +         recv_buf[3] != fan_data->fan_channel) {
> > +             dev_info(&hdev->udev->dev,
> > +                      "[*] failed retrieving fan rmp %d,%d,%d/%d\n",
> > +                      recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
> > +             return -EINVAL;
> > +     }
> > +
> > +     *val = ((recv_buf[4]) << 8) + recv_buf[5];
> > +     return 0;
> > +}
> > +
> > +int set_fan_target_pwm(struct hydro_i_pro_device *hdev,
> > +                    struct hwmon_fan_data *fan_data, long val)
> > +{
> > +     int retval;
> > +     int wrote;
> > +     int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
> > +     int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
> > +
> > +     unsigned char *send_buf = hdev->bulk_out_buffer;
> > +     unsigned char *recv_buf = hdev->bulk_in_buffer;
> > +
> > +     fan_data->fan_pwm_target = val;
> > +     fan_data->fan_target = 0;
> > +
> > +     send_buf[0] = PWM_FAN_TARGET_CMD;
> > +     send_buf[1] = fan_data->fan_channel;
> > +     send_buf[3] = fan_data->fan_pwm_target;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
> > +     if (retval != 0)
> > +             return retval;
> > +
> > +     if (!check_succes(send_buf[0], recv_buf)) {
> > +             dev_info(&hdev->udev->dev,
> > +                      "[*] failed setting fan pwm %d,%d,%d/%d\n",
> > +                      recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
> > +             return -EINVAL;
> > +     }
> > +     return 0;
> > +}
> > +
> > +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr,
> > +                      int channel)
> > +{
> > +     switch (type) {
> > +     case hwmon_fan:
> > +             switch (attr) {
> > +             case hwmon_fan_input:
> > +                     return 0444;
> > +                     break;
> > +             case hwmon_fan_target:
> > +                     return 0644;
> > +                     break;
> > +             case hwmon_fan_min:
> > +                     return 0444;
> > +                     break;
> > +             default:
> > +                     break;
> > +             }
> > +             break;
> > +     case hwmon_pwm:
> > +             switch (attr) {
> > +             case hwmon_pwm_input:
> > +                     return 0200;
> > +                     break;
> > +             case hwmon_pwm_enable:
> > +                     return 0644;
> > +                     break;
> > +             default:
> > +                     break;
> > +             }
> > +             break;
> > +     default:
> > +             break;
> > +     }
> > +     return 0;
> > +}
> > +
> > +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> > +                    u32 attr, int channel, long val)
> > +{
> > +     struct hwmon_data *data = dev_get_drvdata(dev);
> > +     struct hydro_i_pro_device *hdev = data->hdev;
> > +     struct hwmon_fan_data *fan_data;
> > +     int retval = 0;
> > +
> > +     switch (type) {
> > +     case hwmon_fan:
> > +             switch (attr) {
> > +             case hwmon_fan_target:
> > +                     fan_data = data->channel_data[channel];
> > +                     if (fan_data->mode != 1)
> > +                             return -EINVAL;
> > +
> > +                     retval = usb_autopm_get_interface(hdev->interface);
> > +                     if (retval)
> > +                             goto exit;
> > +
> > +                     if (down_trylock(&hdev->limit_sem)) {
> > +                             retval = -EAGAIN;
> > +                             goto cleanup_interface;
> > +                     }
> > +
> > +                     retval = set_fan_target_rpm(hdev, fan_data, val);
> > +                     if (retval)
> > +                             goto cleanup;
> > +
> > +                     break;
> > +             default:
> > +                     return -EINVAL;
> > +             }
> > +             goto exit;
> > +     case hwmon_pwm:
> > +             switch (attr) {
> > +             case hwmon_pwm_input:
> > +                     fan_data = data->channel_data[channel];
> > +                     if (fan_data->mode != 1)
> > +                             return -EINVAL;
> > +
> > +                     retval = usb_autopm_get_interface(hdev->interface);
> > +                     if (retval)
> > +                             goto exit;
> > +
> > +                     if (down_trylock(&hdev->limit_sem)) {
> > +                             retval = -EAGAIN;
> > +                             goto cleanup_interface;
> > +                     }
> > +
> > +                     retval = set_fan_target_pwm(hdev, fan_data, val);
> > +                     if (retval)
> > +                             goto cleanup;
> > +
> > +                     break;
> > +             case hwmon_pwm_enable:
> > +                     fan_data = data->channel_data[channel];
> > +
> > +                     retval = usb_autopm_get_interface(hdev->interface);
> > +                     if (retval)
> > +                             goto exit;
> > +
> > +                     if (down_trylock(&hdev->limit_sem)) {
> > +                             retval = -EAGAIN;
> > +                             goto cleanup_interface;
> > +                     }
> > +                     fan_data->mode = val;
> > +
> > +                     switch (val) {
> > +                     case 0:
> > +                             set_fan_pwm_curve(hdev, fan_data,
> > +                                               default_curve);
> > +                             break;
> > +                     case 1:
> > +                             if (fan_data->fan_target != 0) {
> > +                                     retval = set_fan_target_rpm(
> > +                                             hdev, fan_data,
> > +                                             fan_data->fan_target);
> > +                                     if (retval)
> > +                                             goto cleanup;
> > +                             } else if (fan_data->fan_pwm_target != 0) {
> > +                                     retval = set_fan_target_pwm(
> > +                                             hdev, fan_data,
> > +                                             fan_data->fan_pwm_target);
> > +                                     if (retval)
> > +                                             goto cleanup;
> > +                             }
> > +                             break;
> > +                     case 2:
> > +                             set_fan_pwm_curve(hdev, fan_data, quiet_curve);
> > +                             break;
> > +                     case 3:
> > +                             set_fan_pwm_curve(hdev, fan_data,
> > +                                               balanced_curve);
> > +                             break;
> > +                     case 4:
> > +                             set_fan_pwm_curve(hdev, fan_data,
> > +                                               extreme_curve);
> > +                             break;
> > +                     }
> > +                     break;
> > +             default:
> > +                     return -EINVAL;
> > +             }
> > +             goto exit;
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +
> > +cleanup:
> > +     up(&hdev->limit_sem);
> > +cleanup_interface:
> > +     usb_autopm_put_interface(hdev->interface);
> > +exit:
> > +     return retval;
> > +}
> > +
> > +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> > +            int channel, long *val)
> > +{
> > +     struct hwmon_data *data = dev_get_drvdata(dev);
> > +     struct hydro_i_pro_device *hdev = data->hdev;
> > +     struct hwmon_fan_data *fan_data;
> > +     int retval = 0;
> > +
> > +     if (channel >= data->channel_count)
> > +             return -EAGAIN;
> > +
> > +     switch (type) {
> > +     case hwmon_fan:
> > +             switch (attr) {
> > +             case hwmon_fan_input:
> > +                     fan_data = data->channel_data[channel];
> > +
> > +                     retval = usb_autopm_get_interface(hdev->interface);
> > +                     if (retval)
> > +                             goto exit;
> > +
> > +                     if (down_trylock(&hdev->limit_sem)) {
> > +                             retval = -EAGAIN;
> > +                             goto cleanup_interface;
> > +                     }
> > +
> > +                     retval = get_fan_current_rpm(hdev, fan_data, val);
> > +                     if (retval)
> > +                             goto cleanup;
> > +
> > +                     goto cleanup;
> > +             case hwmon_fan_target:
> > +                     fan_data = data->channel_data[channel];
> > +                     if (fan_data->mode != 1) {
> > +                             *val = 0;
> > +                             goto exit;
> > +                     }
> > +                     *val = fan_data->fan_target;
> > +                     goto exit;
> > +             case hwmon_fan_min:
> > +                     *val = 200;
> > +                     goto exit;
> > +
> > +             default:
> > +                     return -EINVAL;
> > +             }
> > +             goto exit;
> > +
> > +     case hwmon_pwm:
> > +             switch (attr) {
> > +             case hwmon_pwm_enable:
> > +                     fan_data = data->channel_data[channel];
> > +                     *val = fan_data->mode;
> > +                     goto exit;
> > +             default:
> > +                     return -EINVAL;
> > +             }
> > +             goto exit;
> > +
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +
> > +cleanup:
> > +     up(&hdev->limit_sem);
> > +cleanup_interface:
> > +     usb_autopm_put_interface(hdev->interface);
> > +exit:
> > +     return retval;
> > +}
> > +
> > +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN)
> > +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE)
> > +
> > +static const struct hwmon_ops i_pro_ops = {
> > +     .is_visible = hwmon_is_visible,
> > +     .read = hwmon_read,
> > +     .write = hwmon_write,
> > +};
> > +
> > +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel)
> > +{
> > +     int retval;
> > +     int wrote;
> > +     int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr);
> > +     int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr);
> > +
> > +     unsigned char *send_buf = hdev->bulk_out_buffer;
> > +     unsigned char *recv_buf = hdev->bulk_in_buffer;
> > +
> > +     send_buf[0] = RPM_FAN_TARGET_CMD;
> > +     send_buf[1] = channel;
> > +     send_buf[2] = (600 >> 8);
> > +     send_buf[3] = (unsigned char)600;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100);
> > +     if (retval != 0)
> > +             return false;
> > +
> > +     retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
> > +     if (retval != 0)
> > +             return false;
> > +
> > +     if (!check_succes(send_buf[0], recv_buf))
> > +             return false;
> > +     return true;
> > +}
> > +
> > +int get_fan_count(struct hydro_i_pro_device *hdev)
> > +{
> > +     int fan;
> > +
> > +     for (fan = 0; does_fan_exist(hdev, fan); fan += 1)
> > +             ;
> > +     return fan;
> > +}
> > +
> > +void hwmon_init(struct hydro_i_pro_device *hdev)
> > +{
> > +     int fan_id;
> > +     struct device *hwmon_dev;
> > +     struct hwmon_fan_data *fan;
> > +     struct hwmon_data *data = devm_kzalloc(
> > +             &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL);
> > +     struct hwmon_chip_info *hwmon_info = devm_kzalloc(
> > +             &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL);
> > +     //Allocate the info table
> > +     struct hwmon_channel_info **aio_info =
> > +             devm_kzalloc(&hdev->udev->dev,
> > +                          sizeof(struct hwmon_channel_info *) * 2,
> > +                          GFP_KERNEL); //2 for each channel info.
> > +
> > +     //Allocate the fan and PWM configuration
> > +     u32 *fans_config = devm_kzalloc(&hdev->udev->dev,
> > +                                     sizeof(u32) * (data->channel_count + 1),
> > +                                     GFP_KERNEL);
> > +     u32 *pwms_config = devm_kzalloc(&hdev->udev->dev,
> > +                                     sizeof(u32) * (data->channel_count + 1),
> > +                                     GFP_KERNEL);
> > +
> > +     data->channel_count = get_fan_count(hdev); //amount of fans
> > +     data->channel_data =
> > +             devm_kzalloc(&hdev->udev->dev,
> > +                          sizeof(char *) * data->channel_count, GFP_KERNEL);
> > +
> > +     //For each fan create a data channel a fan config entry and a pwm config entry
> > +     for (fan_id = 0; fan_id <= data->channel_count; fan_id++) {
> > +             fan = devm_kzalloc(&hdev->udev->dev,
> > +                                sizeof(struct hwmon_fan_data), GFP_KERNEL);
> > +             fan->fan_channel = fan_id;
> > +             fan->mode = 2;
> > +             data->channel_data[fan_id] = fan;
> > +             fans_config[fan_id] = fan_config;
> > +             pwms_config[fan_id] = pwm_config;
> > +     }
> > +     fans_config[data->channel_count] = 0;
> > +     pwms_config[data->channel_count] = 0;
> > +
> > +     aio_info[0] =
> > +             devm_kzalloc(&hdev->udev->dev,
> > +                          sizeof(struct hwmon_channel_info), GFP_KERNEL);
> > +     aio_info[0]->type = hwmon_fan;
> > +     aio_info[0]->config = fans_config;
> > +
> > +     aio_info[1] =
> > +             devm_kzalloc(&hdev->udev->dev,
> > +                          sizeof(struct hwmon_channel_info), GFP_KERNEL);
> > +     aio_info[1]->type = hwmon_pwm;
> > +     aio_info[1]->config = pwms_config;
> > +
> > +     hwmon_info->ops = &i_pro_ops;
> > +     hwmon_info->info = (const struct hwmon_channel_info **)aio_info;
> > +
> > +     data->hdev = hdev;
> > +     hwmon_dev = devm_hwmon_device_register_with_info(
> > +             &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL);
> > +     dev_info(&hdev->udev->dev, "[*] Setup hwmon\n");
> > +}
> > +
> > +/*
> > + * Devices that work with this driver.
> > + * More devices should work, however none have been tested.
> > + */
> > +static const struct usb_device_id astk_table[] = {
> > +     { USB_DEVICE(0x1b1c, 0x0c15) },
> > +     {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(usb, astk_table);
> > +
> > +int init_device(struct usb_device *udev)
> > +{
> > +     int retval;
> > +
> > +     //This is needed because when running windows in a vm with proprietary driver
> > +     //and you switch to this driver, the device will not respond unless you run this.
> > +     retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40,
> > +                              0xffff, 0x0000, 0, 0, 0);
> > +     //this always returns error
> > +     if (retval != 0)
> > +             ;
> > +
> > +     retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40,
> > +                              0x0002, 0x0000, 0, 0, 0);
> > +     return retval;
> > +}
> > +
> > +int deinit_device(struct usb_device *udev)
> > +{
> > +     return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40,
> > +                            0x0004, 0x0000, 0, 0, 0);
> > +}
> > +
> > +static void astk_delete(struct hydro_i_pro_device *hdev)
> > +{
> > +     usb_put_intf(hdev->interface);
> > +     usb_put_dev(hdev->udev);
> > +     kfree(hdev->bulk_in_buffer);
> > +     kfree(hdev->bulk_out_buffer);
> > +     kfree(hdev);
> > +}
> > +
> > +static int astk_probe(struct usb_interface *interface,
> > +                   const struct usb_device_id *id)
> > +{
> > +     struct hydro_i_pro_device *hdev;
> > +     int retval;
> > +     struct usb_endpoint_descriptor *bulk_in, *bulk_out;
> > +
> > +     hdev = kzalloc(sizeof(*hdev), GFP_KERNEL);
> > +     if (!hdev) {
> > +             retval = -ENOMEM;
> > +             goto exit;
> > +     }
> > +
> > +     retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in,
> > +                                        &bulk_out, NULL, NULL);
> > +     if (retval != 0)
> > +             goto exit;
> > +
> > +     hdev->udev = usb_get_dev(interface_to_usbdev(interface));
> > +     hdev->interface = usb_get_intf(interface);
> > +
> > +     /* set up the endpoint information */
> > +     /* use only the first bulk-in and bulk-out endpoints */
> > +     hdev->bulk_in_size = usb_endpoint_maxp(bulk_in);
> > +     hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL);
> > +     hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress;
> > +     hdev->bulk_out_size = usb_endpoint_maxp(bulk_out);
> > +     hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL);
> > +     hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
> > +
> > +     retval = init_device(hdev->udev);
> > +     if (retval) {
> > +             dev_err(&interface->dev, "failed initialising this device.\n");
> > +             goto exit;
> > +     }
> > +
> > +     hwmon_init(hdev);
> > +
> > +     usb_set_intfdata(interface, hdev);
> > +     sema_init(&hdev->limit_sem, 8);
> > +exit:
> > +     return retval;
> > +}
> > +
> > +static void astk_disconnect(struct usb_interface *interface)
> > +{
> > +     struct hydro_i_pro_device *hdev = usb_get_intfdata(interface);
> > +
> > +     dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n");
> > +     usb_set_intfdata(interface, NULL);
> > +     astk_delete(hdev);
> > +     deinit_device(hdev->udev);
> > +}
> > +static int astk_resume(struct usb_interface *intf)
> > +{
> > +     return 0;
> > +}
> > +
> > +static int astk_suspend(struct usb_interface *intf, pm_message_t message)
> > +{
> > +     return 0;
> > +}
> > +
> > +static struct usb_driver hydro_i_pro_driver = {
> > +     .name = "hydro_i_pro_device",
> > +     .id_table = astk_table,
> > +     .probe = astk_probe,
> > +     .disconnect = astk_disconnect,
> > +     .resume = astk_resume,
> > +     .suspend = astk_suspend,
> > +     .supports_autosuspend = 1,
> > +};
> > +
> > +static int __init hydro_i_pro_init(void)
> > +{
> > +     return usb_register(&hydro_i_pro_driver);
> > +}
> > +
> > +static void __exit hydro_i_pro_exit(void)
> > +{
> > +     usb_deregister(&hydro_i_pro_driver);
> > +}
> > +
> > +module_init(hydro_i_pro_init);
> > +module_exit(hydro_i_pro_exit);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@xxxxxxxxx>");
> > +MODULE_DESCRIPTION("Corsair HXXXi pro device driver");
> >
>



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux