Linux ARM MSM

• Thread Index

• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 2/8] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 6/8] phy: qcom-qmp-combo: Introduce drm_bridge
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 5/8] phy: qcom-qmp-combo: Introduce orientation switching
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 4/8] phy: qcom-qmp-combo: Introduce orientation variable
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 0/8] phy: qcom-qmp-combo: Support orientation switching
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] Coresight: Add coresight dummy driver
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [RFC PATCH 0/1] Categorize ARM dts directory
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH v12 06/25] mailbox: Add Gunyah message queue mailbox
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH] soc: qcom: ocmem: Add OCMEM hardware version print
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 2/8] drm/display/dsc: add helper to set semi-const parameters
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 0/8] Introduce MSM-specific DSC helpers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 4/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 1/8] drm/display/dsc: Add flatness and initial scale value calculations
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 6/8] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v7 5/8] drm/msm/dpu: Use DRM DSC helper for det_thresh_flatness
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] soc: qcom: ocmem: Add OCMEM hardware version print
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/3] Provide parent clocks to msm8226 mmcc
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v12 06/25] mailbox: Add Gunyah message queue mailbox
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: msm8226: Provide clocks to mmcc node
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v13 20/24] virt: gunyah: Add proxy-scheduled vCPUs
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 22/24] virt: gunyah: Add irqfd interface
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 23/24] virt: gunyah: Add ioeventfd
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 24/24] MAINTAINERS: Add Gunyah hypervisor drivers section
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 19/24] virt: gunyah: Add IO handlers
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 17/24] gunyah: vm_mgr: Add framework for VM Functions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 18/24] virt: gunyah: Add resource tickets
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 21/24] virt: gunyah: Add hypercalls for sending doorbell
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 16/24] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 15/24] docs: gunyah: Document Gunyah VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 11/24] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 09/24] gunyah: rsc_mgr: Add RPC for sharing memory
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 13/24] gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 08/24] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 14/24] virt: gunyah: Add Qualcomm Gunyah platform ops
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 12/24] samples: Add sample userspace Gunyah VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 06/24] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 03/24] virt: gunyah: Add hypercalls to identify Gunyah
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 04/24] virt: gunyah: msgq: Add hypercalls to send and receive messages
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 01/24] dt-bindings: Add binding for gunyah hypervisor
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 05/24] mailbox: Add Gunyah message queue mailbox
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 07/24] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 00/24] Drivers for Gunyah hypervisor
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v13 02/24] gunyah: Common types and error codes for Gunyah hypercalls
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH V4 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4] drm/msm: Fix submit error-path leaks
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [Freedreno] [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH V4 3/3] arm64: dts: qcom: sm8450: Add video clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/18] remoteproc: Convert to platform remove callback returning void
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: clk-alpha-pll: Add support for lucid ole pll ops
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3] drm/msm: Fix submit error-path leaks
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH V4 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V4 3/3] arm64: dts: qcom: sm8450: Add video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V4 1/3] dt-bindings: clock: qcom: Add SM8450 video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH V4 0/3] Add video clock controller driver for SM8450
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 06/11] clk: qcom: IPQ9574: Add q6/wcss clocks
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 3/4] clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: remove oxili_ocmemgx_clk
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH 2/2] drm/msm: Be more shouty if per-process pgtables aren't working
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 3/4] clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 1/4] clk: qcom: clk-alpha-pll: Add support for lucid ole pll ops
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 0/4] Add Video Clock Controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v3 09/18] soc: qcom: Add qcom's pstore minidump driver support
  • From: Luca Stefani <luca.stefani.ge1@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 0/2] Add initial support for RDP442 of IPQ5332 family
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 12/18] soc: qcom: Register pstore frontend region with minidump
  • From: Luca Stefani <luca.stefani.ge1@xxxxxxxxx>
• Re: [RFC PATCH v4 2/2] PM: domains: Skip disabling unused until sync state
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] spi: spi-geni-qcom: Select FIFO mode for chip select
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH v4 1/2] PM: domains: Expand initial state of domain to support unknown state
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH v2 15/18] media: venus: vdec: Fix version check in vdec_set_work_route()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 06/18] media: venus: firmware: Leave a clue for homegrown porters
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• [PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 5/9] phy: qcom-qusb2: add QUSB2 support for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 4/9] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 3/9] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v11 1/9] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v11 0/9] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 02/18] media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: qcom: Add GCC driver support for SDX75
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2] mtd: rawnand: qcom: Implement exec_op()
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V6 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V6 0/3] soc: qcom: boot_stats: Add driver support for boot_stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V6 3/3] MAINTAINERS: Add the entry for boot_stats driver support
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH V3 0/6] Incremental patches on minimal boot support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mmc: sdhci-msm: Document SC8280XP SDHCI
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: mmc: sdhci-msm: add IPQ6018 compatible
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v7 3/3] mmc: sdhci-msm: Switch to the new ICE API
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] spi: spi-geni-qcom: Select FIFO mode for chip select
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [PATCH v4 3/4] iio: adc: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v4 0/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v4 4/4] serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v4 1/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v4 2/4] hwmon: pmbus: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH V3 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 4/4] clk: qcom: Add GCC driver support for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: clock: Add GCC bindings support for SDX75
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/6] ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] ARM: dts: qcom: apq8074-dragonboard: add resin and gpio keys
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/6] ARM: dts: qcom-pm8941: add resin support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/6] power: reset: qcom-pon: add support for pm8941-pon
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V3 6/6] PCI: qcom: Add support for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 57/89] i2c: qup: Convert to platform remove callback returning void
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 56/89] i2c: qcom-geni: Convert to platform remove callback returning void
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mmc: sdhci-msm: Document SC8280XP SDHCI
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 04/18] soc: qcom: Add Qualcomm minidump kernel driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] bus: qcom-ebi2: simplify the code in qcom_ebi2_probe()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: ramp_controller: Improve error message for failure in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mmc: sdhci-msm: Document SC8280XP SDHCI
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH V4 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 1/2] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 2/2] soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH V2 0/2] Add SoC ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: mmc: sdhci-msm: Document SC8280XP SDHCI
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 09/13] net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH 07/13] soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v6 1/1] soc: qcom: mdt_loader: Enhance split binary detection
  • From: Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 07/13] drm/msm/dpu: Add SM6350 support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 07/13] drm/msm/dpu: Add SM6350 support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/7] drm/msm/dpu: Use DRM DSC helper for det_thresh_flatness
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 4/7] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dsi: simplify pixel clk rate handling
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 00/89] i2c: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 56/89] i2c: qcom-geni: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 55/89] i2c: qcom-cci: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 57/89] i2c: qup: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] drm/msm/iommu: Fix null pointer dereference in no-IOMMU case
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v5 7/8] drm/display/dsc: include the rest of pre-SCR parameters
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 06/13] dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device types
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/4] Add haptics support to Nexus 5 using pwm-vibra driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc: ipq5332: Use floor ops for SDCC clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: remove oxili_ocmemgx_clk
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: power: reset: convert nvmem-reboot-mode bindings to YAML
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] clk: qcom: gcc: ipq5332: Use floor ops for SDCC clocks
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 2/2] soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] bus: qcom-ebi2: simplify the code in qcom_ebi2_probe()
  • From: Ziliang Liao <saraday@xxxxxxxxxxx>
• [PATCH v2 5/6] ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 6/6] ARM: dts: qcom: apq8074-dragonboard: enable coincell charger
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/6] ARM: dts: qcom-pm8941: add resin support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/6] ARM: dts: qcom: apq8074-dragonboard: enable additional devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/6] ARM: dts: qcom: apq8074-dragonboard: add resin and gpio keys
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/6] power: reset: qcom-pon: add support for pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 6/6] PCI: qcom: Add support for IPQ9574
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v2] remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] clk: qcom: mmcc-msm8974: remove oxili_ocmemgx_clk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 0/2] Add SoC ID for IPQ5312 and IPQ5302
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 05/11] dt-bindings: clock: qcom: gcc-ipq9574: Add Q6 gcc clock control
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v7 13/13] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 12/13] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 11/13] arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 10/13] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 09/13] arm64: dts: qcom: pm8150b: Add a TCPM description
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 07/13] usb: typec: qcom: Add Qualcomm PMIC Type-C driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 08/13] arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switching
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 06/13] dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device types
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 05/13] dt-bindings: usb: Add Qualcomm PMIC Type-C
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 04/13] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 03/13] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 02/13] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark regulator-*-microamp required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 01/13] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v7 00/13] Add Qualcomm PMIC TPCM support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 02/11] dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 02/11] dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] thermal: qcom: tsens-v0_1: Add mdm9607 correction offsets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/6] dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 5/6] dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 2/6] thermal: qcom: tsens-v0_1: Fix mdm9607 slope values
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 1/6] thermal: qcom: tsens: Drop unused legacy structs
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 0/6] thermal: qcom: tsens: Fix MDM9607, add MSM8909
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 6/6] thermal: qcom: tsens-v0_1: Add MSM8909 data
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v4 3/6] thermal: qcom: tsens-v0_1: Add mdm9607 correction offsets
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bus: qcom-ebi2: simplify the code in qcom_ebi2_probe()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] bus: qcom-ebi2: use prefix devm for clock resource allocation functions
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 6/6] thermal: qcom: tsens-v0_1: Add MSM8909 data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/6] thermal: qcom: tsens-v0_1: Fix mdm9607 slope values
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 6/6] PCI: qcom: Add support for IPQ9574
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 6/6] PCI: qcom: Add support for IPQ9574
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: qcom: apq8074-dragonboard: enable coincell charger
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 5/6] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: branch: Extend the invert logic for branch2 clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH V3 5/6] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/8] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/8] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: phy: qmp-ufs: tweak clock and clock-names for sa8775p
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: phy: qcom,edp-phy: allow power-domains
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v9 0/4] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 03/18] docs: qcom: Add qualcomm minidump guide
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v2 0/6] arm64: qcom: sa8775p: add support for USB
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v1 3/3] ARM: dts: qcom: apq8074-dragonboard: enable HDMI output
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] phy: qcom-qmp: fix init-count imbalance
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC PATCH v1 2/3] ARM: dts: qcom: msm8974: add support for the HDMI output
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: qcom: apq8074-dragonboard: enable coincell charger
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: qcom: apq8074-dragonboard: add resin and gpio keys
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: qcom-pm8941: add resin support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: apq8096: fix fixed regulator name property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: msm8996: correct MMCC clocks order
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: msm8916: correct LPASS CPU clocks order
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/6] soc: qcom: ocmem: Add support for msm8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 04/18] soc: qcom: Add Qualcomm minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 0/3] Enable IPQ9574 TSENS support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
  • From: "Leonard Lausen" <leonard@xxxxxxxxx>
• [PATCH 6/6] ARM: dts: qcom: apq8074-dragonboard: enable coincell charger
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/6] ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/6] ARM: dts: qcom-pm8941: add resin support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/6] ARM: dts: qcom: apq8074-dragonboard: add resin and gpio keys
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/6] power: reset: qcom-pon: add support for pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/6] ARM: dts: qcom: apq8074-dragonboard: enable additional devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• Re: [PATCH v6 12/13] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: msm8226: Add thermal zones node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH v1 3/3] ARM: dts: qcom: apq8074-dragonboard: enable HDMI output
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RFC PATCH v1 2/3] ARM: dts: qcom: msm8974: add support for the HDMI output
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RFC PATCH v1 1/3] drm/msm/hdmi: add msm8974 PLL support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RFC PATCH v1 0/3] drm/msm: add support for HDMI on msm8974
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: msm8226: Add qfprom node
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 6/6] ARM: dts: msm8226: Add thermal zones node
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 4/6] ARM: dts: msm8226: Add qfprom node
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 2/6] dt-bindings: thermal: tsens: Add compatible for MSM8226
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 0/6] Enable MSM8226 TSENS support
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• Re: [PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/4] ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/4] ARM: dts: qcom: msm8974: add ocmem clock to GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/4] ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/4] ARM: dts: qcom: apq8074-dragonboard enable DSI and remoteproc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: apq8096: fix fixed regulator name property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: msm8996: correct MMCC clocks order
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: msm8916: correct LPASS CPU clocks order
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 31/53] drm/msm: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v3 4/5] iio: adc: qcom-spmi-adc5: Remove unnecessary datasheet_name NULL check
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND v3 3/5] iio: adc: qcom-spmi-adc5: Fall back to datasheet_name instead of fwnode name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND v3 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND v3 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RESEND v3 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/6] soc: qcom: ocmem: Add support for msm8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 6/6] ARM: dts: qcom: msm8226: Add ocmem
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/6] Add MSM8226 OCMEM support plus some extra OCMEM driver fixes
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/2] misc: fastrpc: support complete DMA pool access to the DSP
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] misc: fastrpc: FastRPC reserved memory assignment for SDM845 SLPI
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] misc: fastrpc: use coherent pool for untranslated Compute Banks
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] clk: qcom: mmcc-msm8974: Add OXILICX_GDSC for msm8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [Freedreno] [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH] clk: qcom: smd-rpm: conditionally enable scaling before doing handover
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 2/2] misc: fastrpc: use coherent pool for untranslated Compute Banks
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] misc: fastrpc: support complete DMA pool access to the DSP
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH 5/8] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/8] PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/8] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/8] PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/8] PCI: qcom: Disable write access to read only registers for IP v2.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND 2/2] dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/8] PCI: qcom: Disable write access to read only registers for IP v2.9.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/8] PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RESEND 2/2] dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
  • From: Baoquan He <bhe@xxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/8] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 8/8] PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 6/8] PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 7/8] PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 3/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 4/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/8] PCI: qcom: Disable write access to read only registers for IP v2.9.0
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/8] PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/8] PCI: qcom: Do not advertise hotplug capability
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• Re: [PATCH] serial: qcom-geni: fix enabling deactivated interrupt
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 08/12] drm/msm/dpu: Add SM6375 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 06/12] drm/msm/dpu: Add SM6350 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 09/12] drm/msm: mdss: Add SM6375 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 11/12] iommu/arm-smmu-qcom: Add SM6375 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 12/12] iommu/arm-smmu-qcom: Add SM6350 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 07/12] drm/msm: mdss: Add SM6350 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 10/12] iommu/arm-smmu-qcom: Sort the compatible list alphabetically
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 02/12] dt-bindings: display/msm: dsi-controller-main: Add SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 01/12] dt-bindings: display/msm: dsi-controller-main: Add SM6350
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 00/12] SM63(50|75) DPU support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2 0/4] Add DSC v1.2 Support for DSI
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v2 2/4] drm/msm/dsi: Fix compressed word count calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 06/18] media: venus: firmware: Leave a clue for homegrown porters
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 15/18] media: venus: vdec: Fix version check in vdec_set_work_route()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 12/18] media: venus: hfi_venus: Fix version check in venus_cpu_idle_and_pc_ready()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 11/18] media: venus: hfi_venus: Fix version check in venus_cpu_and_video_core_idle()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: hfi_venus: Fix version checks in venus_halt_axi()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 10/18] media: venus: hfi_venus: Fix version checks in venus_isr()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 1/9] drm/msm/dpu: fix SSPP register definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/18] media: venus: Remap bufreq fields on HFI6XX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2 02/18] media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: arm: qcom: Add Fxtec Pro1X
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: msm8996: Add CAMSS power domain and power-domain-names to CAMSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] media: dt-bindings: media: camss: qcom,msm8996-camss: Add CAMSS power domain and power-domain-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v10 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 1/9] drm/msm/dpu: fix SSPP register definitions
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 7/9] drm/msm/dpu: drop DPU_PLANE_QOS_PANIC_CTRL
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 8/9] drm/msm/dpu: remove struct dpu_hw_pipe_qos_cfg
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 9/9] drm/msm/dpu: use common helper for WB and SSPP QoS setup
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 6/9] drm/msm/dpu: simplify qos_ctrl handling
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 5/9] drm/msm/dpu: drop DPU_PLANE_QOS_VBLANK_CTRL
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 4/9] drm/msm/dpu: rearrange QoS setting code
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 3/9] drm/msm/dpu: fix the condition for (not) applying QoS to CURSOR SSPP
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 2/9] drm/msm/dpu: simplify CDP programming
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: arm: qcom: Add Fxtec Pro1X
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• [PATCH v2 0/2] Add F(x)tec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8916-ufi: make UDC dual mode
  • From: Yang Xiwen <forbidden405@xxxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: hfi_venus: Fix version checks in venus_halt_axi()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• [PATCH] serial: qcom-geni: fix enabling deactivated interrupt
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v4 1/2] PM: domains: Expand initial state of domain to support unknown state
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v4 2/2] PM: domains: Skip disabling unused until sync state
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [RFC PATCH v4 0/2] PM: domain: Support skiping disabling unused domains until sync state
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: hfi_venus: Fix version checks in venus_halt_axi()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 15/18] media: venus: vdec: Fix version check in vdec_set_work_route()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 14/18] media: venus: hfi_platform: Check vpu_version instead of device compatible
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 12/18] media: venus: hfi_venus: Fix version check in venus_cpu_idle_and_pc_ready()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 11/18] media: venus: hfi_venus: Fix version check in venus_cpu_and_video_core_idle()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 10/18] media: venus: hfi_venus: Fix version checks in venus_isr()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 09/18] media: venus: hfi_venus: Fix version checks in venus_halt_axi()
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 06/18] media: venus: firmware: Leave a clue for homegrown porters
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 06/18] media: venus: firmware: Leave a clue for homegrown porters
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 05/18] media: venus: Add vpu_version to most SoCs
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 04/18] media: venus: Introduce VPU version distinction
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 03/18] media: venus: Remap bufreq fields on HFI6XX
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 03/13] dt-bindings: display/msm: Add SM6350 DPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/18] media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 01/18] media: venus: hfi_venus: Only consider sys_idle_indicator on V1
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 07/13] drm/msm/dpu: Add SM6350 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: nvmem: sunplus,sp7021-ocotp: drop unneeded address/size-cells
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: nvmem: socionext,uniphier-efuse: drop unneeded address/size-cells
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: nvmem: qcom,spmi-sdam: drop unneeded address/size-cells
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: nvmem: qcom,qfprom: drop unneeded address/size-cells
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/5] dt-bindings: nvmem: mxs-ocotp: drop unneeded address/size-cells
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Leo Yan <leo.yan@xxxxxxxxxx>
• Re: [PATCH 0/3] Add GPIO support to PM8953 PMIC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] venus: return P010 as preferred format for 10 bit decode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 4/4] venus: return P010 as preferred format for 10 bit decode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 1/3] Coresight: Add coresight dummy driver
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/3] Coresight: Add coresight dummy driver
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v4 0/3] Add support to configure Coresight Dummy subunit
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v4 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH v10 9/9] arm64: dts: qcom: ipq9574: Enable USB
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] venus: return P010 as preferred format for 10 bit decode
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v10 5/9] phy: qcom-qusb2: add QUSB2 support for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 9/9] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 3/9] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 4/9] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 1/9] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v10 0/9] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v6 6/8] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v5 2/3] pinctrl: qcom: Refactor target specific pinctrl driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: qrb4210-rb2: Enable EUD debug peripheral
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: soc: qcom: eud: Add SM6115 / SM4250 support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 4/5] arm64: dts: qcom: sm6115: Add EUD dt node and dwc3 connector
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 0/5] Add Qualcomm SM6115 / SM4250 EUD dt-bindings & driver support
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 1/5] usb: misc: eud: Fix eud sysfs path (use 'qcom_eud')
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH V23 2/3] misc: dcc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V23 0/3] misc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V23 3/3] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V23 1/3] dt-bindings: misc: qcom,dcc: Add the dtschema
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH v3 04/18] soc: qcom: Add Qualcomm minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 13/18] remoteproc: qcom_wcnss: Convert to platform remove callback returning void
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 12/18] remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 11/18] remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 10/18] remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 09/18] remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe()
  • From: d202180596@xxxxxxxxxxx
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 13/18] remoteproc: qcom_wcnss: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/18] remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 00/18] remoteproc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 11/18] remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/18] remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/4] drm/msm/dsi: Adjust pclk rate for compression
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• Re: [PATCH v7 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH 10/18] remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH V4 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v7 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/7] drm/msm/dpu: add DPU_PINGPONG_DSC bits into PP_BLK and PP_BLK_TE marcos
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 2/7] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] venus: add handling of bit depth change from firmwar
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] venus: update calculation for dpb buffers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] venus: update calculation for dpb buffers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 4/7] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] venus: return P010 as preferred format for 10 bit decode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] venus: add support for V4L2_PIX_FMT_P010 color format
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sa8775p: enable AOSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/5] usb: misc: eud: Add driver support for SM6115 / SM4250
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v5 7/7] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>