[PATCH v3 2/8] PCI: qcom: Disable write access to read only registers for IP v2.9.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.

While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en()
guard function to align with rest of the driver.

Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 01795ee7ce45..391a45d1e70a 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1136,6 +1136,7 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(0, pcie->parf + PARF_Q2A_FLUSH);
 
 	dw_pcie_dbi_ro_wr_en(pci);
+
 	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
 
 	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
@@ -1145,6 +1146,8 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
 			PCI_EXP_DEVCTL2);
 
+	dw_pcie_dbi_ro_wr_dis(pci);
+
 	for (i = 0; i < 256; i++)
 		writel(0, pcie->parf + PARF_BDF_TO_SID_TABLE_N + (4 * i));
 
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux