Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 43 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts | 43 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 43 +++++++++++++++++++++
3 files changed, 129 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
index 3af1d5556950..ba733b6cab06 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "ipq5332.dtsi"
/ {
@@ -20,6 +22,33 @@
chosen {
stdout-path = "serial0";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_uart0 {
@@ -57,6 +86,20 @@
/* PINCTRL */
&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
i2c_1_pins: i2c-1-state {
pins = "gpio29", "gpio30";
function = "blsp1_i2c0";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
index bcf3b31c20e3..5322b9ee3359 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "ipq5332.dtsi"
/ {
@@ -20,6 +22,33 @@
chosen {
stdout-path = "serial0";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_uart0 {
@@ -71,6 +100,20 @@
/* PINCTRL */
&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
i2c_1_pins: i2c-1-state {
pins = "gpio29", "gpio30";
function = "blsp1_i2c0";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
index 3b6a5cb8bf07..15c54dfcaf3f 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "ipq5332.dtsi"
/ {
@@ -20,6 +22,33 @@
chosen {
stdout-path = "serial0";
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_uart0 {
@@ -64,6 +93,20 @@
/* PINCTRL */
&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
sdc_default_state: sdc-default-state {
clk-pins {
pins = "gpio13";
--
2.17.1
