[PATCH v4 0/4] arm64: dts: qcom: qdu1000: add SDHCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add sdhc instance for supporting eMMC on QDU1000 and
QRU1000 SoCs.

Changes in v4 -
 * Fixed the subject prefix to arm64.
 * Updated the pinctrl entries alphabetically.

Changes in v3 -
 * Removed aliases and dropped "_1" suffix as suggested by Bjorn.
 * Changed pinconfig names.

Changes in v2-
 * Updated the binding alphabetically.
 * Removed extra comments as suggested by Bhupesh.
 * Moved non-removable, no-sd, no-sdio and other properties from
   soc to board dts file as suggested by Bhupesh and Konrad.
 * Removed extra newlines and leading zeroes as suggested by Konrad.
 * Modified sdhc1_opp_table.
 * Updated the SDHC node entries alphabetically.
 * Moved the status entry at the end.

Komal Bajaj (4):
  dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible
  arm64: dts: qcom: qdu1000: Add SDHCI node
  arm64: dts: qcom: qdu1000: Add SDHCI pin configuration to DTSI
  arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

 .../devicetree/bindings/mmc/sdhci-msm.yaml    |  1 +
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts      | 23 +++++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi         | 97 +++++++++++++++++++
 3 files changed, 121 insertions(+)

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux