Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/mmcc-msm8998.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/clk/qcom/mmcc-msm8998.c b/drivers/clk/qcom/mmcc-msm8998.c
index 4490594bde69..9b98e0fb8b91 100644
--- a/drivers/clk/qcom/mmcc-msm8998.c
+++ b/drivers/clk/qcom/mmcc-msm8998.c
@@ -2453,6 +2453,7 @@ static struct clk_branch fd_ahb_clk = {
static struct clk_branch mnoc_ahb_clk = {
.halt_reg = 0x5024,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x5024,
.enable_mask = BIT(0),
@@ -2468,6 +2469,7 @@ static struct clk_branch mnoc_ahb_clk = {
static struct clk_branch bimc_smmu_ahb_clk = {
.halt_reg = 0xe004,
+ .halt_check = BRANCH_HALT_SKIP,
.hwcg_reg = 0xe004,
.hwcg_bit = 1,
.clkr = {
@@ -2485,6 +2487,7 @@ static struct clk_branch bimc_smmu_ahb_clk = {
static struct clk_branch bimc_smmu_axi_clk = {
.halt_reg = 0xe008,
+ .halt_check = BRANCH_HALT_SKIP,
.hwcg_reg = 0xe008,
.hwcg_bit = 1,
.clkr = {
--
2.40.1
