This series adds the required configs for MDP5 and DSI blocks that are needed for MDSS on MSM8226. Finally we can add the new nodes into the dts. Tested on apq8026-lg-lenok and msm8926-htc-memul. Signed-off-by: Luca Weiss <luca@xxxxxxxxx> --- Changes in v3: - Adjust mdss labels to new style (Stephan) - Link to v2: https://lore.kernel.org/r/20230308-msm8226-mdp-v2-0-e005b769ee28@xxxxxxxxx Changes in v2: - In dsi-phy-28nm.yaml fix the order of the compatibles 1/7 (Conor) - Remove leftover debugging comments from 6/7 (Konrad) - Rewrap some clock-names lines and move status property last in 7/7 (Konrad) - Pick up tags - Link to v1: https://lore.kernel.org/r/20230308-msm8226-mdp-v1-0-679f335d3d5b@xxxxxxxxx --- Luca Weiss (7): dt-bindings: msm: dsi-phy-28nm: Document msm8226 compatible dt-bindings: display/msm: dsi-controller-main: Add msm8226 compatible dt-bindings: display/msm: qcom,mdp5: Add msm8226 compatible drm/msm/mdp5: Add MDP5 configuration for MSM8226 drm/msm/dsi: Add configuration for MSM8226 drm/msm/dsi: Add phy configuration for MSM8226 ARM: dts: qcom: msm8226: Add mdss nodes .../bindings/display/msm/dsi-controller-main.yaml | 2 + .../bindings/display/msm/dsi-phy-28nm.yaml | 3 +- .../devicetree/bindings/display/msm/qcom,mdp5.yaml | 1 + .../devicetree/bindings/display/msm/qcom,mdss.yaml | 1 + arch/arm/boot/dts/qcom-msm8226.dtsi | 127 +++++++++++++++++++++ drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 82 +++++++++++++ drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 + drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 + drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 97 ++++++++++++++++ 11 files changed, 319 insertions(+), 2 deletions(-) --- base-commit: 1b3183710d69a48baf728cc1bee9f1fb3cfeb507 change-id: 20230308-msm8226-mdp-6431e8d672a0 Best regards, -- Luca Weiss <luca@xxxxxxxxx>
