Hello,
This series adds support for Modem Host Interface (MHI) Endpoint function
driver and few updates to the PCI endpoint core.
MHI
===
MHI is the communication protocol used by the host machines to control and
communicate with the Qualcomm modems/WLAN devices over any high speed physical
bus like PCIe. In Linux kernel, MHI is modeled as a bus driver [1] and there
are two instances of MHI used in a typical setup.
1. MHI host - MHI implementation for the host machines like x86/ARM64.
2. MHI Endpoint - MHI implementation for the endpoint devices like modems.
MHI EPF
=======
The MHI Endpoint function driver (MHI EPF) is used on the MHI endpoint devices
like modems. The MHI EPF driver sits in between the PCIe EP and MHI EP bus and
carries out all of the PCIe related activities like BAR config, PCIe Event
handling, MMIO read/write etc,... for the MHI EP bus.
Below is the simple representation of the setup:
+----------------------------------------------------+
| Endpoint CPU |
| |
+------------+ | +------------+ +-----------+ +-----------+ |
| | | | | | | | | |
| | | | MHI EP | | | | | | PCIe Bus
| Modem DSP +---+---+ Bus +---+ MHI EPF +---+ PCIe EP +---+---------
| | | | | | | | | |
| | | | | | | | | |
+------------+ | +------------+ +-----------+ +-----------+ |
| |
| |
+----------------------------------------------------+
The data packets will be read from the Modem DSP by the MHI stack and will be
transmitted to the host machine over PCIe bus with the help of MHI EPF driver.
Test setup
==========
This series has been tested on Snapdragon X55 modem a.k.a SDX55 connected to
the ARM64 host machine.
Thanks,
Mani
[1] https://www.kernel.org/doc/html/latest/mhi/mhi.html
Changes in v5:
* Moved the PCI EPF driver match logic to pci_epf_match_id() function and used
that to get the matched driver ID for passing to driver probe instead of
storing the id during match.
* Added a patch to fix the missing documentation about MSI/MSI-X start vector.
* Addressed the review comments on the MHI EPF driver. Most notably, got rid of
local variable for tracking MHI registration and used the mhi_dev pointer.
Also, modified the MSI vector increment comment to make it clear.
* Added a patch for adding MHI EPF driver to MAINTAINERS file
Changes in v4:
* Collected review tag from Kishon
* Changed the IP_SW0 channel numbers as per latest MHI spec
Changes in v3:
* Fixed the probe function of EPF_VNTB driver
Changes in v2:
* Rebased on top of v6.3-rc1
* Switched to the new callback interface for passing events from EPC to EPF
* Dropped one patch related to notifier
Manivannan Sadhasivam (9):
MAINTAINERS: Add entry for MHI networking drivers under MHI bus
PCI: endpoint: Add missing documentation about the MSI/MSI-X range
PCI: endpoint: Pass EPF device ID to the probe function
PCI: endpoint: Warn and return if EPC is started/stopped multiple
times
PCI: endpoint: Add linkdown notifier support
PCI: endpoint: Add BME notifier support
PCI: qcom-ep: Add support for Link down notification
PCI: qcom-ep: Add support for BME notification
PCI: endpoint: Add PCI Endpoint function driver for MHI bus
MAINTAINERS | 1 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +
drivers/pci/endpoint/functions/Kconfig | 10 +
drivers/pci/endpoint/functions/Makefile | 1 +
drivers/pci/endpoint/functions/pci-epf-mhi.c | 462 ++++++++++++++++++
drivers/pci/endpoint/functions/pci-epf-ntb.c | 3 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 2 +-
drivers/pci/endpoint/functions/pci-epf-vntb.c | 2 +-
drivers/pci/endpoint/pci-ep-cfs.c | 3 +
drivers/pci/endpoint/pci-epc-core.c | 56 ++-
drivers/pci/endpoint/pci-epf-core.c | 20 +-
include/linux/pci-epc.h | 2 +
include/linux/pci-epf.h | 8 +-
13 files changed, 559 insertions(+), 13 deletions(-)
create mode 100644 drivers/pci/endpoint/functions/pci-epf-mhi.c
--
2.25.1
