On 5/31/2023 12:45 PM, Krzysztof Kozlowski wrote:
On 31/05/2023 08:56, Sridharan S N wrote:
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 43 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts | 43 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 43 +++++++++++++++++++++
3 files changed, 129 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
index 3af1d5556950..ba733b6cab06 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "ipq5332.dtsi"
/ {
@@ -20,6 +22,33 @@
chosen {
stdout-path = "serial0";
};
+
+ gpio_keys {
No underscores in node names.
Will address it in V2
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+ status = "okay";
It's by default, why do you need it?
Will address it in V2
Best regards,
Krzysztof
