Linux ARM MSM

• Thread Index

• Re: [PATCH] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• Re: [PATCH] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• Re: [PATCH v3 4/8] soc: qcom: rpmhpd: Drop SA8540P gfx.lvl
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII
  • From: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
• Re: [PATCH v2 10/10] clk: qcom: Add camcc clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8550: Enable sync_state
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: Clarify comments about the initial phy_gear
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 0/2] phy: qcom: qmp-pcie: Update PCIe PHY settings for SM8550
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 14/16] arm64: dts: qcom: sc8280xp: Fix UFS PHY clocks
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: modify the wrong compatible name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V1 2/2] phy: qcom: Refactor phy_power_on and phy_calibrate callbacks
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH V1 1/2] scsi: ufs: qcom : Refactor phy_power_on/off calls
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: modify the wrong compatible name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFT PATCH v2 4/4] drm/msm/dpu: enable writeback on SM6350
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2] power: supply: qcom_battmgr: Ignore notifications before initialization
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5 6/6] ASoC: codecs: wsa884x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 5/6] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 3/6] reset: gpio: Add GPIO-based reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 2/6] cpufreq: do not open-code of_phandle_args_equal()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 1/6] of: Add of_phandle_args_equal() helper
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 0/6] reset: gpio: ASoC: shared GPIO resets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 00/12] Unregister critical branch clocks + some RPM
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 14/14] arm64: dts: qcom: sa8775p: Drop PCIE_AUX_CLK from pcie_phy nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 13/14] arm64: dts: qcom: sm8650: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 12/14] arm64: dts: qcom: sm8550: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 11/14] arm64: dts: qcom: sm8450: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 10/14] arm64: dts: qcom: sm8350: Drop PCIE_AUX_CLK from pcie_phy nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 09/14] arm64: dts: qcom: sc8280xp: Drop PCIE_AUX_CLK from pcie_phy nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 08/14] arm64: dts: qcom: sc7280: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 07/14] phy: qcom: qmp-pcie: Add a comment to clarify the use of "aux and "phy_aux" clocks
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 06/14] phy: qcom: qmp-pcie: Add a new compatible for SC7280 SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 05/14] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document missing compatible for SM8350 3x2 PHY
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 04/14] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix the usage of aux clk
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 03/14] arm64: dts: qcom: ipq8074: Drop PCIE_AUX_CLK from pcie_phy nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 02/14] arm64: dts: qcom: ipq6018: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 01/14] dt-bindings: phy: qcom,ipq8074-qmp-pcie: Drop PCIE_AUX_CLK from pcie_phy node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 00/14] Drop PCIE_AUX_CLK from the PCIe PHY nodes of Qcom SoCs
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/6] reset: gpio: ASoC: shared GPIO resets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: gcc-msm8953: add reset for MDSS subsystem
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: modify the wrong compatible name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: qcom,gcc-sm8150: Add support for bi_tcxo_ao
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: clock: qcom: Allow VDD_GFX supply to GX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/3] phy: qcom: qmp-pcie: Add support for G3/G4 PCIe PHY for X1E80100
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/2] phy: qcom-qmp-usb: fix ipq8074/ipq6018 USB issues
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 2/6] cpufreq: do not open-code of_phandle_args_equal()
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 01/16] dt-bindings: phy: qmp-ufs: Fix PHY clocks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH V1 2/2] phy: qcom: Refactor phy_power_on and phy_calibrate callbacks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 2/8] clk: qcom: gdsc: Enable supply reglator in GPU GX handler
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 6/8] arm64: dts: qcom: sa8295p-adp: add max20411
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 3/8] clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 5/8] arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 8/8] arm64: defconfig: Enable MAX20411 regulator driver
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: sa8295p-adp: Enable GPU
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 4/8] soc: qcom: rpmhpd: Drop SA8540P gfx.lvl
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 0/8] arm64: dts: qcom: sa8295p: Enable GPU
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: clock: qcom: Allow VDD_GFX supply to GX
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2] soc: qcom: aoss: Add tracepoints in qmp_send()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: qcom: consolidate functions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: qcom: consolidate functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: modify the wrong compatible name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 774551425799cb5bbac94e1768fd69eec4f78dd4
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: pinctrl: qcom: consolidate functions
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: qcom: modify the wrong compatible name
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 0/2] dt-bindings: pinctrl: qcom: update SM4450 pinctrl
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 15/15] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/5] drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: aoss: Add tracepoints in qmp_send()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH 0/3] Add MDSS_BCR reset for MSM8953
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: gcc-msm8953: add reset for MDSS subsystem
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/3] clk: qcom: gcc-msm8953: add MDSS_BCR reset
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: msm8953: add reset for display subsystem
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 15/15] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH v2] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH v4 0/6] reset: gpio: ASoC: shared GPIO resets
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: Clarify comments about the initial phy_gear
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: aoss: Add tracepoints in qmp_send()
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 9/9] remoteproc: stm32: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 2/9] remoteproc: imx_rproc: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 4/9] remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 8/9] remoteproc: st: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 7/9] remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 6/9] remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 3/9] remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 1/9] remoteproc: imx_dsp_rproc: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 5/9] remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v9 5/5] iommu/arm-smmu: add ACTLR data and support for SC7280
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 08/11] arm64: dts: qcom: x1e80100: Add display nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 02/11] arm64: dts: qcom: x1e80100: Add SMP2P nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 04/11] arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 11/11] arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 07/11] arm64: dts: qcom: x1e80100: Add PCIe nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 06/11] arm64: dts: qcom: x1e80100: Add USB nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 05/11] arm64: dts: qcom: x1e80100: Add TCSR node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 03/11] arm64: dts: qcom: x1e80100: Add QMP AOSS node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 01/11] arm64: dts: qcom: x1e80100: Add IPCC node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8550: Enable sync_state
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 10/10] clk: qcom: Add camcc clock driver for x1e80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] power: supply: qcom_battmgr: Ignore notifications before initialization
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
  • From: Mantas <mantas@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8150: Add bi_tcxo_ao support for gcc
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: qcom,gcc-sm8150: Add support for bi_tcxo_ao
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH 0/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH 2/2] phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• [PATCH 1/2] phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• [PATCH 0/2] phy: qcom-qmp-usb: fix ipq8074/ipq6018 USB issues
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v2] power: supply: qcom_battmgr: Ignore notifications before initialization
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: neil.armstrong@xxxxxxxxxx
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: Re: Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 6/6] ASoC: codecs: wsa884x: Allow sharing reset GPIO
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] cpufreq: do not open-code of_phandle_args_equal()
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] of: Add of_phandle_args_equal() helper
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v9 5/5] iommu/arm-smmu: add ACTLR data and support for SC7280
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v9 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v9 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v9 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v9 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: Re: Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: (subset) [PATCH 0/4] phy: qcom: qmp-usbc: enable SDM660 support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] phy: qcom: qmp-usbc: properly handle the clamping register
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/8] Add UFS support for SC7180/SM7125
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 6/6] ASoC: codecs: wsa884x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 5/6] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 3/6] reset: gpio: Add GPIO-based reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 2/6] cpufreq: do not open-code of_phandle_args_equal()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 1/6] of: Add of_phandle_args_equal() helper
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 0/6] reset: gpio: ASoC: shared GPIO resets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• [PATCH v3 0/2] arm64: qcom: sm8650: add support for USB-C Altmode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: defconfig: enable WCD939x USBSS driver as module
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: sm8650-qrd: add USB-C Altmode Support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 0/5] PM: domains: Add control for switching back and forth to HW control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• Re: [PATCH RESEND] arm64: dts: qcom: qcm6490-idp: Add support for PM7250B PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 10/10] clk: qcom: Add camcc clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 08/10] clk: qcom: Add GPU clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 07/10] clk: qcom: Add dispcc clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 11/11] arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 10/11] arm64: dts: qcom: x1e80100-qcp: Enable more support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 09/11] arm64: dts: qcom: x1e80100-crd: Enable more support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 08/11] arm64: dts: qcom: x1e80100: Add display nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 07/11] arm64: dts: qcom: x1e80100: Add PCIe nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 06/11] arm64: dts: qcom: x1e80100: Add USB nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 05/11] arm64: dts: qcom: x1e80100: Add TCSR node
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 04/11] arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 03/11] arm64: dts: qcom: x1e80100: Add QMP AOSS node
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 02/11] arm64: dts: qcom: x1e80100: Add SMP2P nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 01/11] arm64: dts: qcom: x1e80100: Add IPCC node
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 00/11] arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH RESEND] arm64: dts: qcom: qcm6490-idp: Add support for PM7250B PMIC
  • From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 4/4] arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v7 3/4] remoteproc: qcom: pas: Add SM8650 remoteproc support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 01/12] clk: qcom: branch: Add a helper for setting the enable bit
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add PM8010 regulators for sm8650 boards.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Document the HDK8550 board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: qcom: Document the HDK8550 board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/2] arm64: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v7 4/4] arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 3/4] remoteproc: qcom: pas: Add SM8650 remoteproc support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 2/4] remoteproc: qcom: pas: make region assign more generic
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 1/4] dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 0/4] remoteproc: qcom: Introduce DSP support for SM8650
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH v2 0/2] Add PM8010 regulators for sm8650 boards.
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH] interconnect: qcom: sm8550: Enable sync_state
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq5018-rdp432-c2: correct board name
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 0/2] Add PM8010 regulators for sm8650 boards.
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• [PATCH] clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/atomic-helpers: remove legacy_cursor_update hacks
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: input: melfas,mms114: add MMS252 compatible
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: QAIC reset failure
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [1/4] interconnect: qcom: icc-rpmh: Add QoS config support
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] regulator: qcom_smd: Keep one rpm handle for all vregs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 0/5] ASoC: codecs: add support for WCD939x Codec
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/33] spi: get rid of some legacy macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/33] spi: get rid of some legacy macros
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v2 00/33] spi: get rid of some legacy macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 21/33] spi: geni-qcom: Follow renaming of SPI "master" to "controller"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 0/3] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC v4 05/11] scsi: ufs: qcom: Perform read back after writing CGC enable
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: ep: Use kcalloc() instead of kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add board-id support for multiple DT selection
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 0/2] arm64: qcom: sm8550: add support for the SM8550-HDK board
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Rong Zhang <i@xxxxxxxx>
• Re: [PATCH net-next 18/20] net: ethernet: qualcomm: Add PPE MAC support for phylink
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH RFC v4 01/11] scsi: ufs: qcom: Perform read back after writing reset bit
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8926-htc-memul: Add rmtfs memory node
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 13/14] drm/msm/dp: move next_bridge handling to dp_display
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH RFC v4 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH RFC v4 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 09/11] scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 08/11] scsi: ufs: core: Perform read back after disabling interrupts
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 07/11] scsi: ufs: core: Perform read back after writing UTP_TASK_REQ_LIST_BASE_H
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 06/11] scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 04/11] scsi: ufs: qcom: Perform read back after writing unipro mode
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 03/11] scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH RFC v4 00/11] scsi: ufs: Remove overzealous memory barriers
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq5018-rdp432-c2: correct board name
  • From: Ziyang Huang <hzyitc@xxxxxxxxxxx>
• Re: [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Document the HDK8550 board
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Remove QDF2xxx support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] slimbus: qcom-ngd-ctrl: Make QMI message rules const
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: sc7180 kernel hang with linux-next
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq5018-rdp432-c2: correct board name
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [2/4] interconnect: qcom: sc7280: enable qos programming
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Rong Zhang <i@xxxxxxxx>
• Re: [1/4] interconnect: qcom: icc-rpmh: Add QoS config support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [1/4] interconnect: qcom: icc-rpmh: Add QoS config support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 17/23] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 18/24] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 22/28] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: Re: [PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] media: venus: core: Add SC8280XP resource struct
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: sc7180 kernel hang with linux-next
  • From: Laura Nao <laura.nao@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.15 25/35] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 36/53] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 37/53] drm/msm/dpu: fix writeback programming for YUV cases
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 49/73] drm/msm/dpu: fix writeback programming for YUV cases
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 48/73] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 47/73] drm/msm/dpu: enable writeback on SM8450
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 46/73] drm/msm/dpu: enable writeback on SM8350
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 26/73] drm/msm/dp: Add DisplayPort controller for SM8650
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH net-next 18/20] net: ethernet: qualcomm: Add PPE MAC support for phylink
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• [PATCH AUTOSEL 6.7 56/88] drm/msm/dpu: fix writeback programming for YUV cases
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 57/88] drm/msm/dpu: Add mutex lock in control vblank irq
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.7 55/88] drm/msm/dpu: Ratelimit framedone timeout msgs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 54/88] drm/msm/dpu: enable writeback on SM8450
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 53/88] drm/msm/dpu: enable writeback on SM8350
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 32/88] drm/msm/dp: Add DisplayPort controller for SM8650
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 08/88] drm/msm/a690: Fix reg values for a690
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974-samsung-klte: Add label on /i2c-gpio-led
  • From: Rong Zhang <i@xxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Rong Zhang <i@xxxxxxxx>
• Re: [3/4] dt-bindings: interconnect: Add clock property to enable QOS on SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH net-next 17/20] net: ethernet: qualcomm: Add PPE UNIPHY support for phylink
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• [4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [3/4] dt-bindings: interconnect: Add clock property to enable QOS on SC7280
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [2/4] interconnect: qcom: sc7280: enable qos programming
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [1/4] interconnect: qcom: icc-rpmh: Add QoS config support
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• Re: [PATCH net-next 02/20] dt-bindings: net: qcom,ppe: Add bindings yaml file
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Icenowy Zheng <uwu@xxxxxxxxxx>
• Re: [PATCH net-next 02/20] dt-bindings: net: qcom,ppe: Add bindings yaml file
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: Re: [PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH 1/2] pinctrl: qcom: Remove QDF2xxx support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] arm64: defconfig: Remove QDF24XX pinctrl
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] Remove QDF2xxx pinctrl drivers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8926-htc-memul: Add rmtfs memory node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: aoss: Mark qmp_send() __printf()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [RESEND PATCH v6 12/12] arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 11/12] firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 10/12] firmware: qcom: tzmem: enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 09/12] firmware: qcom: scm: add support for SHM bridge operations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 08/12] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 07/12] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 06/12] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 04/12] firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 05/12] firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 03/12] firmware: qcom: scm: smc: switch to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 02/12] firmware: qcom: scm: enable the TZ mem allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 01/12] firmware: qcom: add a dedicated TrustZone buffer allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RESEND PATCH v6 00/12] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: Document the HDK8550 board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/2] arm64: qcom: sm8550: add support for the SM8550-HDK board
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• [PATCH] thermal/drivers/tsens: Add suspend to RAM support for tsens
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• Re: [PATCH net-next v9 3/3] net: stmmac: Add driver support for DWMAC5 common safety IRQ
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974-samsung-klte: Add label on /i2c-gpio-led
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: arm: qcom: add Samsung Galaxy S5 China (kltechn)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] dt-bindings: usb: add common Type-C USB Switch schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 00/24] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v4 1/8] clk: qcom: ipq5332: add const qualifier to the clk_init_data structure
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: drm/msm/gpu: Document AON clock for A506/A510
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: msm: qcom,mdss: Include ommited fam-b compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: dsi-controller-main: Document missing msm8976 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 2/5] PM: domains: Add the domain HW-managed mode to the summary
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 0/5] PM: domains: Add control for switching back and forth to HW control
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v4 09/10] dt-bindings: arm: Add support for TPDM CMB MSR register
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/10] dt-bindings: arm: Add support for CMB element size
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: ep: Use kcalloc() instead of kzalloc()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v6] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• [PATCH v4 3/8] dt-bindings: clock: ipq5332: add definition for GPLL0_OUT_AUX clock
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 8/8] arm64: defconfig: build NSS Clock Controller driver for Qualcomm IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 7/8] arm64: dts: qcom: ipq5332: add support for the NSSCC
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 6/8] clk: qcom: add NSS clock Controller driver for Qualcomm IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 5/8] dt-bindings: clock: add Qualcomm IPQ5332 NSSCC clock and reset definitions
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 4/8] clk: qcom: ipq5332: add gpll0_out_aux clock
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 2/8] clk: qcom: ipq5332: enable few nssnoc clocks in driver probe
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 1/8] clk: qcom: ipq5332: add const qualifier to the clk_init_data structure
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH v4 0/8] Add NSS clock controller support for Qualcomm IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v4 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 06/10] coresight-tpdm: Add support to configure CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v2 1/6] arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] arm64: dts: qcom: pmi8950: Add missing ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: msm8976: Declare and use SDC2 pins
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] arm64: dts: qcom: msm8956-loire: Add usb vbus and id extcons to ci-hdrc
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] arm64: dts: qcom: msm8956-loire: SDCard and USB support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] arm64: dts: qcom: msm8976: Declare and wire SDC pins
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: msm8976: Add WCNSS node
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: msm8976: Declare and wire SDC pins
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 6/8] arm64: dts: qcom: msm8976: Add Adreno GPU
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 5/8] dt-bindings: drm/msm/gpu: Document AON clock for A506/A510
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 4/8] arm64: dts: qcom: msm8976: Add MDSS nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 3/8] dt-bindings: msm: qcom,mdss: Include ommited fam-b compatible
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 2/8] dt-bindings: dsi-controller-main: Document missing msm8976 compatible
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 1/8] arm64: dts: qcom: msm8976: Add IOMMU nodes
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH 0/8] MSM8976 MDSS/GPU/WCNSS support
  • From: Adam Skladowski <a39.skl@xxxxxxxxx>
• [PATCH v4 8/8] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 7/8] arm64: dts: qcom: sm7125-xiaomi-common: Add UFS nodes
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 6/8] arm64: dts: qcom: sc7180: Add UFS nodes
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 5/8] phy: qcom: qmp-ufs: Add SC7180 support
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 4/8] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 9S
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 3/8] dt-bindings: phy: Add QMP UFS PHY compatible for SC7180
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: ufs: qcom: Add SC7180 compatible string
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: crypto: ice: Document SC7180 inline crypto engine
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v4 0/8] Add UFS support for SC7180/SM7125
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China
  • From: Rong Zhang <i@xxxxxxxx>
• [PATCH 3/4] dt-bindings: arm: qcom: add Samsung Galaxy S5 China (kltechn)
  • From: Rong Zhang <i@xxxxxxxx>
• [PATCH 2/4] ARM: dts: qcom: msm8974-samsung-klte: Pin brcm,board-type in wifi
  • From: Rong Zhang <i@xxxxxxxx>
• [PATCH 1/4] ARM: dts: qcom: msm8974-samsung-klte: Add label on /i2c-gpio-led
  • From: Rong Zhang <i@xxxxxxxx>
• [PATCH 0/4] ARM: dts: qcom: msm8974: Add Samsung Galaxy S5 China support
  • From: Rong Zhang <i@xxxxxxxx>
• [PATCH] arm64: dts: qcom: ipq5018-rdp432-c2: correct board name
  • From: Ziyang Huang <hzyitc@xxxxxxxxxxx>
• [PATCH v2 2/2] drm/msm/adreno: Add A305B support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: display/msm: gpu: Allow multiple digits for patchid
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 0/2] Add GPU support for MSM8226 (Adreno A305B)
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8926-htc-memul: Add rmtfs memory node
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] ARM: dts: qcom: apq8026-lg-lenok: Add vibrator support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 0/4] Fix USB Interrupts on Qualcomm Platforms
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH] bus: mhi: ep: Use kcalloc() instead of kzalloc()
  • From: Erick Archer <erick.archer@xxxxxxx>
• Re: [PATCH 0/6] dt-bindings: PCI: qcom: move to dedicated schema (part one)
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] Add board-id support for multiple DT selection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: hwinfo: Add Qualcomm's board-id types
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: hwinfo: Introduce board-id
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• [PATCH 0/2] Add board-id support for multiple DT selection
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: qcom: Document new msm8916-samsung devices
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8960: expressatt: Add gpio-keys
  • From: Rudraksha Gupta via B4 Relay <devnull+guptarud.gmail.com@xxxxxxxxxx>
• Re: [PATCH 13/14] drm/msm/dp: move next_bridge handling to dp_display
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: PCI: qcom: Add interconnects path as required property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH 13/14] drm/msm/dp: move next_bridge handling to dp_display
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v3 0/5] Rework system pressure interface to the scheduler
  • From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
• [PATCH] arm64: qcom: Select PM and PM_GENERIC_DOMAINS
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] soc: qcom: aoss: Mark qmp_send() __printf()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: brgl@xxxxxxxx
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• [PATCH v1 6/6] PCI: epf-mhi: Add flag to enable HDMA for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 5/6] PCI: qcom-ep: Provide number of read/write channel for HDMA
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 0/6] Add Change to integrate HDMA with dwc ep driver
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 06/10] coresight-tpdm: Add support to configure CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 05/10] coresight-tpda: Add support to configure CMB element
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 4/6] arm64: dts: qcom: qcm8550: introduce qcm8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 0/6] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 0/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Maulik Shah (mkshah)" <quic_mkshah@xxxxxxxxxxx>
• [PATCH] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v4 10/10] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 09/10] dt-bindings: arm: Add support for TPDM CMB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 08/10] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 06/10] coresight-tpdm: Add support to configure CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 04/10] coresight-tpdm: Add CMB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 03/10] dt-bindings: arm: Add support for CMB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 00/10] Add support to configure TPDM CMB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: rename PM2250 to PM4125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: socinfo: rename PM2250 to PM4125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [RFC 6/7] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v3 0/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Update generated headers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• [PATCH 1/2] media: v4l2-ctrls: add encoder maximum bitrate control
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• [PATCH 0/2] add MBR type rate control for encoder
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 05/15] usb: typec: tcpm: fix the PD disabled case
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH] hwmon: (peci/cputemp) Add a null pointer check to the wled_configure
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 943b9f0ab2cfbaea148dd6ac279957eb08b96904
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] soc: qcom: aoss: Add tracepoints in qmp_send()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• [PATCH v3] drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: Update generated headers
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 2/7] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 6/7] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 5/7] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 2/7] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 0/7] firmware: arm_scmi: Qualcomm Vendor Protocol
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 7/9] dt-bindings: wireless: ath11k: describe QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 6/9] PCI/pwrseq: add pwrseq core code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 5/9] PCI: hold the rescan mutex when scanning for the first time
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/9] arm64: dts: qcom: sm8650-qrd: add Wifi nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/9] arm64: dts: qcom: sm8550-qrd: add Wifi nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/9] arm64: dts: qcom: qrb5165-rb5: describe the WLAN module of QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add RDP441 board device tree
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: ipq9574: Add RDP433 board device tree
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: add TCSR registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/6] phy: qcom: qmp-usbc: properly handle the clamping register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: mfd: qcom,tcsr: Add compatibles for QCM2290 and SM6115
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 0/3] firmware: arm_scmi: Register and handle limits change notification
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH 3/3] cpufreq: scmi: Enable boost support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH 2/3] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH 1/3] OPP: Extend dev_pm_opp_data with turbo support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>