[PATCH v3] PCI: Add D3 support for PCI bridges in DT based platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Currently, PCI core will enable D3 support for PCI bridges only when the
following conditions are met:

1. Platform is ACPI based
2. Thunderbolt controller is used
3. pcie_port_pm=force passed in cmdline

While options 1 and 2 do not apply to most of the DT based platforms,
option 3 will make the life harder for distro maintainers. Due to this,
runtime PM is also not getting enabled for the bridges.

To fix this, let's make use of the "supports-d3" property [1] in the bridge
DT nodes to enable D3 support for the capable bridges. This will also allow
the capable bridges to support runtime PM, thereby conserving power.

Ideally, D3 support should be enabled by default for the more recent PCI
bridges, but we do not have a sane way to detect them.

[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/pci/pci-pci-bridge.yaml#L31

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
This patch is tested on Qcom SM8450 based development board with an out-of-tree
DT patch.

NOTE: I will submit the DT patches adding this property for applicable bridges
in Qcom SoCs separately.

Changes in v3:
- Fixed kdoc, used of_property_present() and dev_of_node() (Lukas)
- Link to v2: https://lore.kernel.org/r/20240214-pcie-qcom-bridge-v2-1-9dd6dbb1b817@xxxxxxxxxx

Changes in v2:
- Switched to DT based approach as suggested by Lukas.
- Link to v1: https://lore.kernel.org/r/20240202-pcie-qcom-bridge-v1-0-46d7789836c0@xxxxxxxxxx
 drivers/pci/of.c  | 12 ++++++++++++
 drivers/pci/pci.c |  3 +++
 drivers/pci/pci.h |  6 ++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 51e3dd0ea5ab..24b0107802af 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -786,3 +786,15 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
 	return slot_power_limit_mw;
+ * of_pci_bridge_d3 - Check if the bridge is supporting D3 states or not
+ *
+ * @node: device tree node of the bridge
+ *
+ * Return: %true if the bridge is supporting D3 states, %false otherwise.
+ */
+bool of_pci_bridge_d3(struct device_node *node)
+	return of_property_present(node, "supports-d3");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d8f11a078924..8678fba092bb 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1142,6 +1142,9 @@ static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
 	if (pci_use_mid_pm())
 		return false;
+	if (dev_of_node(&dev->dev))
+		return of_pci_bridge_d3(dev->dev.of_node);
 	return acpi_pci_bridge_d3(dev);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2336a8d1edab..10387461b1fe 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -635,6 +635,7 @@ int of_pci_get_max_link_speed(struct device_node *node);
 u32 of_pci_get_slot_power_limit(struct device_node *node,
 				u8 *slot_power_limit_value,
 				u8 *slot_power_limit_scale);
+bool of_pci_bridge_d3(struct device_node *node);
 int pci_set_of_node(struct pci_dev *dev);
 void pci_release_of_node(struct pci_dev *dev);
 void pci_set_bus_of_node(struct pci_bus *bus);
@@ -673,6 +674,11 @@ of_pci_get_slot_power_limit(struct device_node *node,
 	return 0;
+static inline bool of_pci_bridge_d3(struct device_node *node)
+	return false;
 static inline int pci_set_of_node(struct pci_dev *dev) { return 0; }
 static inline void pci_release_of_node(struct pci_dev *dev) { }
 static inline void pci_set_bus_of_node(struct pci_bus *bus) { }

base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240131-pcie-qcom-bridge-b6802a9770a3

Best regards,
Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux