Re: [PATCH v14 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 06, 2024, Krishna Kurapati wrote:
> From: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
> 
> Currently the DWC3 driver supports only single port controller
> which requires at least one HS PHY and at most one SS PHY.
> 
> But the DWC3 USB controller can be connected to multiple ports and
> each port can have their own PHYs. Each port of the multiport
> controller can either be HS+SS capable or HS only capable
> Proper quantification of them is required to modify GUSB2PHYCFG
> and GUSB3PIPECTL registers appropriately.
> 
> Add support for detecting, obtaining and configuring PHYs supported
> by a multiport controller. Limit support to multiport controllers
> with up to four ports for now (e.g. as needed for SC8280XP).
> 
> Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
> Co-developed-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.c | 251 ++++++++++++++++++++++++++++------------
>  drivers/usb/dwc3/core.h |  14 ++-
>  drivers/usb/dwc3/drd.c  |  15 ++-
>  3 files changed, 193 insertions(+), 87 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index c47fec10b231..53cd5279e456 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -124,6 +124,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>  	int ret;
>  	u32 reg;
>  	u32 desired_dr_role;
> +	int i;
>  
>  	mutex_lock(&dwc->mutex);
>  	spin_lock_irqsave(&dwc->lock, flags);
> @@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work)
>  		} else {
>  			if (dwc->usb2_phy)
>  				otg_set_vbus(dwc->usb2_phy->otg, true);
> -			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> -			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> +			for (i = 0; i < dwc->num_usb2_ports; i++) {
> +				phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> +				phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
> +			}
>  			if (dwc->dis_split_quirk) {
>  				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
>  				reg |= DWC3_GUCTL3_SPLITDISABLE;
> @@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work)
>  
>  		if (dwc->usb2_phy)
>  			otg_set_vbus(dwc->usb2_phy->otg, false);
> -		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> -		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
> +		phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
> +		phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>  
>  		ret = dwc3_gadget_init(dwc);
>  		if (ret)
> @@ -589,22 +592,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> -/**
> - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
> - * @dwc: Pointer to our controller context structure
> - *
> - * Returns 0 on success. The USB PHY interfaces are configured but not
> - * initialized. The PHY interfaces and the PHYs get initialized together with
> - * the core in dwc3_core_init.
> - */
> -static int dwc3_phy_setup(struct dwc3 *dwc)
> +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
>  {
>  	unsigned int hw_mode;
>  	u32 reg;
>  
>  	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>  
> -	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> +	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
>  
>  	/*
>  	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
> @@ -659,9 +654,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  	if (dwc->dis_del_phy_power_chg_quirk)
>  		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>  
> -	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
>  
> -	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> +	return 0;
> +}
> +
> +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
> +{
> +	unsigned int hw_mode;
> +	u32 reg;
> +
> +	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +
> +	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
>  
>  	/* Select the HS PHY interface */
>  	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
> @@ -673,7 +678,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  		} else if (dwc->hsphy_interface &&
>  				!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
>  			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
> -			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
>  		} else {
>  			/* Relying on default value. */
>  			if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
> @@ -740,7 +745,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  	if (dwc->ulpi_ext_vbus_drv)
>  		reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV;
>  
> -	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
> +
> +	return 0;
> +}
> +
> +/**
> + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
> + * @dwc: Pointer to our controller context structure
> + *
> + * Returns 0 on success. The USB PHY interfaces are configured but not
> + * initialized. The PHY interfaces and the PHYs get initialized together with
> + * the core in dwc3_core_init.
> + */
> +static int dwc3_phy_setup(struct dwc3 *dwc)
> +{
> +	int i;
> +	int ret;
> +
> +	for (i = 0; i < dwc->num_usb3_ports; i++) {
> +		ret = dwc3_ss_phy_setup(dwc, i);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		ret = dwc3_hs_phy_setup(dwc, i);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	return 0;
>  }
> @@ -748,23 +781,32 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>  static int dwc3_phy_init(struct dwc3 *dwc)
>  {
>  	int ret;
> +	int i;
> +	int j;
>  
>  	usb_phy_init(dwc->usb2_phy);
>  	usb_phy_init(dwc->usb3_phy);
>  
> -	ret = phy_init(dwc->usb2_generic_phy);
> -	if (ret < 0)
> -		goto err_shutdown_usb3_phy;
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		ret = phy_init(dwc->usb2_generic_phy[i]);
> +		if (ret < 0)
> +			goto err_exit_phy;
>  
> -	ret = phy_init(dwc->usb3_generic_phy);
> -	if (ret < 0)
> -		goto err_exit_usb2_phy;
> +		ret = phy_init(dwc->usb3_generic_phy[i]);
> +		if (ret < 0) {
> +			phy_exit(dwc->usb2_generic_phy[i]);
> +			goto err_exit_phy;
> +		}
> +	}
>  
>  	return 0;
>  
> -err_exit_usb2_phy:
> -	phy_exit(dwc->usb2_generic_phy);
> -err_shutdown_usb3_phy:
> +err_exit_phy:
> +	for (j = i - 1; j >= 0; j--) {
> +		phy_exit(dwc->usb3_generic_phy[j]);
> +		phy_exit(dwc->usb2_generic_phy[j]);
> +	}
> +
>  	usb_phy_shutdown(dwc->usb3_phy);
>  	usb_phy_shutdown(dwc->usb2_phy);
>  
> @@ -773,8 +815,12 @@ static int dwc3_phy_init(struct dwc3 *dwc)
>  
>  static void dwc3_phy_exit(struct dwc3 *dwc)
>  {
> -	phy_exit(dwc->usb3_generic_phy);
> -	phy_exit(dwc->usb2_generic_phy);
> +	int i;
> +
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		phy_exit(dwc->usb3_generic_phy[i]);
> +		phy_exit(dwc->usb2_generic_phy[i]);
> +	}
>  
>  	usb_phy_shutdown(dwc->usb3_phy);
>  	usb_phy_shutdown(dwc->usb2_phy);
> @@ -783,23 +829,32 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
>  static int dwc3_phy_power_on(struct dwc3 *dwc)
>  {
>  	int ret;
> +	int i;
> +	int j;
>  
>  	usb_phy_set_suspend(dwc->usb2_phy, 0);
>  	usb_phy_set_suspend(dwc->usb3_phy, 0);
>  
> -	ret = phy_power_on(dwc->usb2_generic_phy);
> -	if (ret < 0)
> -		goto err_suspend_usb3_phy;
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		ret = phy_power_on(dwc->usb2_generic_phy[i]);
> +		if (ret < 0)
> +			goto err_power_off_phy;
>  
> -	ret = phy_power_on(dwc->usb3_generic_phy);
> -	if (ret < 0)
> -		goto err_power_off_usb2_phy;
> +		ret = phy_power_on(dwc->usb3_generic_phy[i]);
> +		if (ret < 0) {
> +			phy_power_off(dwc->usb2_generic_phy[i]);
> +			goto err_power_off_phy;
> +		}
> +	}
>  
>  	return 0;
>  
> -err_power_off_usb2_phy:
> -	phy_power_off(dwc->usb2_generic_phy);
> -err_suspend_usb3_phy:
> +err_power_off_phy:
> +	for (j = i - 1; j >= 0; j--) {
> +		phy_power_off(dwc->usb3_generic_phy[j]);
> +		phy_power_off(dwc->usb2_generic_phy[j]);
> +	}
> +
>  	usb_phy_set_suspend(dwc->usb3_phy, 1);
>  	usb_phy_set_suspend(dwc->usb2_phy, 1);
>  
> @@ -808,8 +863,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
>  
>  static void dwc3_phy_power_off(struct dwc3 *dwc)
>  {
> -	phy_power_off(dwc->usb3_generic_phy);
> -	phy_power_off(dwc->usb2_generic_phy);
> +	int i;
> +
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		phy_power_off(dwc->usb3_generic_phy[i]);
> +		phy_power_off(dwc->usb2_generic_phy[i]);
> +	}
>  
>  	usb_phy_set_suspend(dwc->usb3_phy, 1);
>  	usb_phy_set_suspend(dwc->usb2_phy, 1);
> @@ -1201,6 +1260,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	unsigned int		hw_mode;
>  	u32			reg;
>  	int			ret;
> +	int			i;
>  
>  	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>  
> @@ -1244,15 +1304,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
>  	    !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
>  		if (!dwc->dis_u3_susphy_quirk) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> -			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> -			dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> +			for (i = 0; i < dwc->num_usb3_ports; i++) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
> +				reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> +				dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
> +			}
>  		}
>  
>  		if (!dwc->dis_u2_susphy_quirk) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> -			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> -			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			for (i = 0; i < dwc->num_usb2_ports; i++) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> +				reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> +				dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> +			}
>  		}
>  	}
>  
> @@ -1372,7 +1436,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>  {
>  	struct device		*dev = dwc->dev;
>  	struct device_node	*node = dev->of_node;
> +	char phy_name[9];
>  	int ret;
> +	int i;
>  
>  	if (node) {
>  		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> @@ -1398,22 +1464,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>  			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>  	}
>  
> -	dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> -	if (IS_ERR(dwc->usb2_generic_phy)) {
> -		ret = PTR_ERR(dwc->usb2_generic_phy);
> -		if (ret == -ENOSYS || ret == -ENODEV)
> -			dwc->usb2_generic_phy = NULL;
> +	for (i = 0; i < dwc->num_usb2_ports; i++) {
> +		if (dwc->num_usb2_ports == 1)
> +			sprintf(phy_name, "usb2-phy");
>  		else
> -			return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> -	}
> +			sprintf(phy_name, "usb2-%d", i);
> +
> +		dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
> +		if (IS_ERR(dwc->usb2_generic_phy[i])) {
> +			ret = PTR_ERR(dwc->usb2_generic_phy[i]);
> +			if (ret == -ENOSYS || ret == -ENODEV)
> +				dwc->usb2_generic_phy[i] = NULL;
> +			else
> +				return dev_err_probe(dev, ret,
> +						"failed to lookup phy %s\n", phy_name);
> +		}
>  
> -	dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> -	if (IS_ERR(dwc->usb3_generic_phy)) {
> -		ret = PTR_ERR(dwc->usb3_generic_phy);
> -		if (ret == -ENOSYS || ret == -ENODEV)
> -			dwc->usb3_generic_phy = NULL;
> +		if (dwc->num_usb2_ports == 1)
> +			sprintf(phy_name, "usb3-phy");
>  		else
> -			return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> +			sprintf(phy_name, "usb3-%d", i);
> +
> +		dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
> +		if (IS_ERR(dwc->usb3_generic_phy[i])) {
> +			ret = PTR_ERR(dwc->usb3_generic_phy[i]);
> +			if (ret == -ENOSYS || ret == -ENODEV)
> +				dwc->usb3_generic_phy[i] = NULL;
> +			else
> +				return dev_err_probe(dev, ret,
> +						"failed to lookup phy %s\n", phy_name);
> +		}
>  	}
>  
>  	return 0;
> @@ -1423,6 +1503,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  {
>  	struct device *dev = dwc->dev;
>  	int ret;
> +	int i;
>  
>  	switch (dwc->dr_mode) {
>  	case USB_DR_MODE_PERIPHERAL:
> @@ -1430,8 +1511,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  
>  		if (dwc->usb2_phy)
>  			otg_set_vbus(dwc->usb2_phy->otg, false);
> -		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> -		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
> +		phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
> +		phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>  
>  		ret = dwc3_gadget_init(dwc);
>  		if (ret)
> @@ -1442,8 +1523,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  
>  		if (dwc->usb2_phy)
>  			otg_set_vbus(dwc->usb2_phy->otg, true);
> -		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> -		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> +		for (i = 0; i < dwc->num_usb2_ports; i++) {
> +			phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> +			phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
> +		}
>  
>  		ret = dwc3_host_init(dwc);
>  		if (ret)
> @@ -1939,6 +2022,10 @@ static int dwc3_read_port_info(struct dwc3 *dwc)
>  
>  	iounmap(base);
>  
> +	if (dwc->num_usb2_ports > DWC3_MAX_PORTS ||
> +	    dwc->num_usb3_ports > DWC3_MAX_PORTS)
> +		return -ENOMEM;
> +
>  	return 0;
>  }
>  
> @@ -2176,6 +2263,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  {
>  	unsigned long	flags;
>  	u32 reg;
> +	int i;
>  
>  	switch (dwc->current_dr_role) {
>  	case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -2194,17 +2282,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  		/* Let controller to suspend HSPHY before PHY driver suspends */
>  		if (dwc->dis_u2_susphy_quirk ||
>  		    dwc->dis_enblslpm_quirk) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> -			reg |=  DWC3_GUSB2PHYCFG_ENBLSLPM |
> -				DWC3_GUSB2PHYCFG_SUSPHY;
> -			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			for (i = 0; i < dwc->num_usb2_ports; i++) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> +				reg |=  DWC3_GUSB2PHYCFG_ENBLSLPM |
> +					DWC3_GUSB2PHYCFG_SUSPHY;
> +				dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> +			}
>  
>  			/* Give some time for USB2 PHY to suspend */
>  			usleep_range(5000, 6000);
>  		}
>  
> -		phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
> -		phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
> +		for (i = 0; i < dwc->num_usb2_ports; i++) {
> +			phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
> +			phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
> +		}
>  		break;
>  	case DWC3_GCTL_PRTCAP_OTG:
>  		/* do nothing during runtime_suspend */
> @@ -2234,6 +2326,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>  	unsigned long	flags;
>  	int		ret;
>  	u32		reg;
> +	int		i;
>  
>  	switch (dwc->current_dr_role) {
>  	case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -2253,17 +2346,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>  			break;
>  		}
>  		/* Restore GUSB2PHYCFG bits that were modified in suspend */
> -		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> -		if (dwc->dis_u2_susphy_quirk)
> -			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> +		for (i = 0; i < dwc->num_usb2_ports; i++) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> +			if (dwc->dis_u2_susphy_quirk)
> +				reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>  
> -		if (dwc->dis_enblslpm_quirk)
> -			reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
> +			if (dwc->dis_enblslpm_quirk)
> +				reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>  
> -		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> +		}
>  
> -		phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
> -		phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
> +		for (i = 0; i < dwc->num_usb2_ports; i++) {
> +			phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
> +			phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
> +		}
>  		break;
>  	case DWC3_GCTL_PRTCAP_OTG:
>  		/* nothing to do on runtime_resume */
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 4c52fef99838..38f88a341a69 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -33,6 +33,12 @@
>  
>  #include <linux/power_supply.h>
>  
> +/*
> + * Maximum number of ports currently supported for multiport
> + * controllers.
> + */
> +#define DWC3_MAX_PORTS 4
> +
>  #define DWC3_MSG_MAX	500
>  
>  /* Global constants */
> @@ -1037,8 +1043,8 @@ struct dwc3_scratchpad_array {
>   * @usb_psy: pointer to power supply interface.
>   * @usb2_phy: pointer to USB2 PHY
>   * @usb3_phy: pointer to USB3 PHY
> - * @usb2_generic_phy: pointer to USB2 PHY
> - * @usb3_generic_phy: pointer to USB3 PHY
> + * @usb2_generic_phy: pointer to array of USB2 PHYs
> + * @usb3_generic_phy: pointer to array of USB3 PHYs
>   * @num_usb2_ports: number of USB2 ports
>   * @num_usb3_ports: number of USB3 ports
>   * @phys_ready: flag to indicate that PHYs are ready
> @@ -1186,8 +1192,8 @@ struct dwc3 {
>  	struct usb_phy		*usb2_phy;
>  	struct usb_phy		*usb3_phy;
>  
> -	struct phy		*usb2_generic_phy;
> -	struct phy		*usb3_generic_phy;
> +	struct phy		*usb2_generic_phy[DWC3_MAX_PORTS];
> +	struct phy		*usb3_generic_phy[DWC3_MAX_PORTS];
>  
>  	u8			num_usb2_ports;
>  	u8			num_usb3_ports;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 57ddd2e43022..d76ae676783c 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -331,6 +331,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>  	u32 reg;
>  	int id;
>  	unsigned long flags;
> +	int i;
>  
>  	if (dwc->dr_mode != USB_DR_MODE_OTG)
>  		return;
> @@ -386,9 +387,12 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>  		} else {
>  			if (dwc->usb2_phy)
>  				otg_set_vbus(dwc->usb2_phy->otg, true);
> -			if (dwc->usb2_generic_phy)
> -				phy_set_mode(dwc->usb2_generic_phy,
> -					     PHY_MODE_USB_HOST);
> +			for (i = 0; i < dwc->num_usb2_ports; i++) {
> +				if (dwc->usb2_generic_phy[i]) {
> +					phy_set_mode(dwc->usb2_generic_phy[i],
> +						     PHY_MODE_USB_HOST);
> +				}
> +			}
>  		}
>  		break;
>  	case DWC3_OTG_ROLE_DEVICE:
> @@ -400,9 +404,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>  
>  		if (dwc->usb2_phy)
>  			otg_set_vbus(dwc->usb2_phy->otg, false);
> -		if (dwc->usb2_generic_phy)
> -			phy_set_mode(dwc->usb2_generic_phy,
> -				     PHY_MODE_USB_DEVICE);
> +		if (dwc->usb2_generic_phy[0])
> +			phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
>  		ret = dwc3_gadget_init(dwc);
>  		if (ret)
>  			dev_err(dwc->dev, "failed to initialize peripheral\n");
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux