Re: [PATCH v14 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 06, 2024, Krishna Kurapati wrote:
> DWC3 Qcom wrapper currently supports only wakeup configuration
> for single port controllers. Read speed of each port connected
> to the controller and enable wakeup for each of them accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 72 ++++++++++++++++++------------------
>  1 file changed, 37 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index a20d63a791bd..572dc3fdae12 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -78,6 +78,7 @@ struct dwc3_qcom_port {
>  	int			dp_hs_phy_irq;
>  	int			dm_hs_phy_irq;
>  	int			ss_phy_irq;
> +	enum usb_device_speed	usb2_speed;
>  };
>  
>  struct dwc3_qcom {
> @@ -336,7 +337,8 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
>  	return dwc->xhci;
>  }
>  
> -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom,
> +						       int port_index)
>  {
>  	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  	struct usb_device *udev;
> @@ -347,14 +349,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
>  	 */
>  	hcd = platform_get_drvdata(dwc->xhci);
>  
> -	/*
> -	 * It is possible to query the speed of all children of
> -	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> -	 * currently supports only 1 port per controller. So
> -	 * this is sufficient.
> -	 */
>  #ifdef CONFIG_USB
> -	udev = usb_hub_find_child(hcd->self.root_hub, 1);
> +	udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
>  #else
>  	udev = NULL;
>  #endif
> @@ -387,23 +383,29 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>  
>  static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  {
> +	int i;
> +
>  	dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
>  
> -	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
> -	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> -			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> -	} else {
> -		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> -		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
> -	}
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		if (qcom->port_info[i].usb2_speed == USB_SPEED_LOW) {
> +			dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq);
> +		} else if ((qcom->port_info[i].usb2_speed == USB_SPEED_HIGH) ||
> +				(qcom->port_info[i].usb2_speed == USB_SPEED_FULL)) {
> +			dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq);
> +		} else {
> +			dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq);
> +			dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq);
> +		}
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].ss_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[i].ss_phy_irq);
> +	}
>  }
>  
>  static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  {
> +	int i;
> +
>  	dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
>  
>  	/*
> @@ -414,22 +416,24 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  	 * disconnect and remote wakeup. When no device is connected, configure both
>  	 * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
>  	 */
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		qcom->port_info[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
> +		if (qcom->port_info[i].usb2_speed == USB_SPEED_LOW) {
> +			dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq,
> +						    IRQ_TYPE_EDGE_FALLING);
> +		} else if ((qcom->port_info[i].usb2_speed == USB_SPEED_HIGH) ||
> +				(qcom->port_info[i].usb2_speed == USB_SPEED_FULL)) {
> +			dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq,
> +						    IRQ_TYPE_EDGE_FALLING);
> +		} else {
> +			dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dp_hs_phy_irq,
> +						    IRQ_TYPE_EDGE_RISING);
> +			dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].dm_hs_phy_irq,
> +						    IRQ_TYPE_EDGE_RISING);
> +		}
>  
> -	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> -					    IRQ_TYPE_EDGE_FALLING);
> -	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> -			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> -					    IRQ_TYPE_EDGE_FALLING);
> -	} else {
> -		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> -					    IRQ_TYPE_EDGE_RISING);
> -		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> -					    IRQ_TYPE_EDGE_RISING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[i].ss_phy_irq, 0);
>  	}
> -
> -	dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].ss_phy_irq, 0);
>  }
>  
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -455,10 +459,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	 * The role is stable during suspend as role switching is done from a
>  	 * freezable workqueue.
>  	 */
> -	if (dwc3_qcom_is_host(qcom) && wakeup) {
> -		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
> +	if (dwc3_qcom_is_host(qcom) && wakeup)
>  		dwc3_qcom_enable_interrupts(qcom);
> -	}
>  
>  	qcom->is_suspended = true;
>  
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

BR,
Thinh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux