The relevant documents and the dtsi specify the minimum value at 1.808v not
1.8v.
Prior to this fix we get the following error on boot:
[ 1.353540] vrej_l3m_1p8: failed to get the current voltage: -ENOTRECOVERABLE
[ 1.353544] qcom-rpmh-regulator 17500000.rsc:regulators-9: ldo3: devm_regulator_register() failed, ret=-131
[ 1.353546] qcom-rpmh-regulator: probe of 17500000.rsc:regulators-9 failed with error -131
Fixes: 2544631faa7f ("regulator: qcom-rpmh: add support for pm8010 regulators")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/regulator/qcom-rpmh-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 80e304711345b..767a17fe0d51b 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -757,7 +757,7 @@ static const struct rpmh_vreg_hw_data pmic5_pldo502ln = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
.voltage_ranges = (struct linear_range[]) {
- REGULATOR_LINEAR_RANGE(1800000, 0, 2, 200000),
+ REGULATOR_LINEAR_RANGE(1808000, 0, 2, 200000),
REGULATOR_LINEAR_RANGE(2608000, 3, 28, 16000),
REGULATOR_LINEAR_RANGE(3104000, 29, 30, 96000),
REGULATOR_LINEAR_RANGE(3312000, 31, 31, 0),
--
2.43.0
