Re: [PATCH v4 2/8] clk: qcom: ipq5332: enable few nssnoc clocks in driver probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 17 Feb 2024 at 17:45, Kathiravan Thirumoorthy
<quic_kathirav@xxxxxxxxxxx> wrote:
>
>
> <snip>
>
> >> Reason being, to access the NSSCC clocks, these GCC clocks
> >> (gcc_snoc_nssnoc_clk, gcc_snoc_nssnoc_1_clk, gcc_nssnoc_nsscc_clk)
> >> should be turned ON. But CCF disables these clocks as well due to the
> >> lack of consumer.
> >
> > This means that NSSCC is also a consumer of those clocks. Please fix
> > both DT and nsscc driver to handle NSSNOC clocks.
>
>
> Thanks Dmitry. I shall include these clocks in the NSSCC DT node and
> enable the same in the NSSCC driver probe.

Or use them through pm_clk. This might be better, as the system
doesn't need these clocks if NSSCC is suspended.

>
> >
> >>> Once you have actual drivers, this should solve itself, the drivers
> >>> will consume the clocks.
> >>
> >>
> >> Given that, NSSCC is being built as module, there is no issue in booting
> >> the kernel. But if you do insmod of the nsscc-ipq5332.ko, system will
> >> reset.
> >>
> >> Without the networking drivers, there is no need to install this module.
> >> And as you stated, once the drivers are available, there will be no issues.
> >>
> >> So can I explain the shortcomings of installing this module without the
> >> networking drivers in cover letter and drop this patch all together?
> >
> > No. Using allyesconfig or allmodconfig and installing the full modules
> > set should work.
> >
>
>
> Okay, Got it. Thanks for the information.
>
> <snip>



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux