Linux ARM MSM

• Thread Index

• [PATCH v3 0/2] Introduce RPM Master stats
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V3 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH V3 8/9] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V3 2/9] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: clock: qcom,videocc: Add SM8350
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] remoterproc: qcom: refactor to leverage exported minidump symbol
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] clk: qcom: dispcc-qcm2290: Fix BI_TCXO_AO handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/2] clk: qcom: dispcc-qcm2290: Fix GPLL0_OUT_DIV handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] QCM2290 dispcc fixups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] remoterproc: qcom: refactor to leverage exported minidump symbol
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 2/6] remoteproc: qcom: Move minidump specific data to qcom_minidump.h
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH V3 6/9] dt-bindings: firmware: document IPQ5018 SCM
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 9/9] arm64: defconfig: Enable IPQ5018 SoC base configs
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 1/9] dt-bindings: arm64: Add IPQ5018 clock and reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 8/9] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 7/9] dt-bindings: mmc: sdhci-msm: Document the IPQ5018 compatible
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 4/9] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 5/9] dt-bindings: qcom: Add ipq5018 bindings
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 3/9] dt-bindings: pinctrl: qcom: Add support for ipq5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH V3 0/9] Add minimal boot support for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH] media: venus: only set H264_TRANSFORM_8X8 on supported hfi versions
  • From: Martin Dørum <dorum@xxxxxxxxxxxxxxx>
• Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v3 03/18] dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: always program dsc active bits
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: touchscreen: add bindings for focaltech,fts5452
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 05/14] dt-bindings: usb: Add Qualcomm PMIC Type-C YAML schema
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v5 04/14] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add ports as an optional
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] remoteproc: qcom: Move minidump specific data to qcom_minidump.h
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• RE: [PATCH V1 1/2] mmc: core: Define new vendor ops to enable internal features
  • From: "Sarthak Garg (QUIC)" <quic_sartgarg@xxxxxxxxxxx>
• Re: [PATCH v5 00/14] Add Qualcomm PMIC TPCM support
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: sc7280: Add power-domains for cpuidle states
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• [PATCH v3 1/3] cpuidle: dt_idle_genpd: Add helper function to remove genpd topology
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• [PATCH v3 2/3] cpuidle: psci: Move enabling OSI mode after power domains creation
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• [PATCH v3 0/3] Use PSCI OS initiated mode for sc7280
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• Re: [PATCH V1 1/2] mmc: core: Define new vendor ops to enable internal features
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• RE: [PATCH V1 1/2] mmc: core: Define new vendor ops to enable internal features
  • From: "Sarthak Garg (QUIC)" <quic_sartgarg@xxxxxxxxxxx>
• RE: [PATCH V1 1/2] mmc: core: Define new vendor ops to enable internal features
  • From: "Sarthak Garg (QUIC)" <quic_sartgarg@xxxxxxxxxxx>
• Re: [PATCH v6 0/8] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v11 0/3] Add resets for ADSP based audio clock controller driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] QCM2290 dispcc fixups
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/7] arm64: dts: qcom: sa8775p: add more IOMMUs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 3/3] clk: qcom: dispcc-qcm2290: Fix GPLL0_OUT_DIV handling
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/3] clk: qcom: dispcc-qcm2290: Fix BI_TCXO_AO handling
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: touchscreen: add bindings for focaltech,fts5452
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: sa8155p-adp: Make -cells decimal
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: Add PMI632 PMIC
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 1/3] venus: add firmware version based check
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] venus: add firmware version based check
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/6] remoteproc: qcom: Move minidump specific data to qcom_minidump.h
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 3/6] docs: qcom: Add qualcomm minidump guide
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 4/6] soc: qcom: Add Qualcomm minidump kernel driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: sa8155p-adp: Make -cells decimal
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 1/3] clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 2/3] arm64: dts: qcom: sc8280xp: Add ethernet nodes
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v5 0/3] Add EMAC3 support for sa8540p-ride (devicetree/clk bits)
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: qcom,videocc: Add SM8350
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 0/8] Add multiport support for DWC3 controllers
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH 0/2] SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: Introduce SM8350 VIDEOCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: clock: qcom,videocc: Add SM8350
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• RE: [PATCH v4 08/12] drm/display/dsc: add YCbCr 4:2:2 and 4:2:0 RC parameters
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Giuliano Procida <gprocida@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Nicolas Schier <nicolas@xxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH V3 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8775p: pmic: add the sdam_0 node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] arm64: dts: qcom: sa8775p: pmic: remove the PON modes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: always program dsc active bits
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v4 4/6] drm/i915: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v5 00/14] Add Qualcomm PMIC TPCM support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Mark Wielaard <mark@xxxxxxxxx>
• Re: [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 00/14] Add Qualcomm PMIC TPCM support
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [net-next PATCH v6 03/16] net: dsa: qca8k: add LEDs blink_set() support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 01/16] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v6 09/16] net: phy: marvell: Implement led_blink_set()
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 04/16] leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 07/16] net: phy: marvell: Add software control of the LEDs
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sa8775p: pmic: add the sdam_0 node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/4] dt-bindings: power: reset: convert nvmem-reboot-mode bindings to YAML
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/4] arm64: defconfig: enable building the nvmem-reboot-mode module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/4] arm64: dts: qcom: sa8775p: pmic: remove the PON modes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/4] arm64: qcom: fix the reboot reason handling on sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 7/7] soundwire: qcom: use tabs for indentation in defines
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 4/6] drm/i915: Switch to fdinfo helper
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] drm: Add common fdinfo helper
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH v5 13/14] usb: typec: qcom: Add Qualcomm PMIC TCPM support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 14/14] phy: qcom-qmp: Register as a typec switch for orientation detection
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 12/14] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 11/14] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 10/14] arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 09/14] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 08/14] arm64: dts: qcom: pm8150b: Add a TCPM description
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 07/14] arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switching
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 06/14] dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device types
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 05/14] dt-bindings: usb: Add Qualcomm PMIC Type-C YAML schema
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 04/14] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add ports as an optional
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 03/14] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 01/14] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 02/14] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark regulator-*-microamp required
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v5 00/14] Add Qualcomm PMIC TPCM support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 6/7] soundwire: qcom: add support for v2.0.0 controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 5/7] soundwire: qcom: prepare for handling different register layouts
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 4/7] soundwire: qcom: use consistently 'ctrl' as state variable name
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add EMAC3 support for sa8540p-ride
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 3/6] drm/amdgpu: Switch to fdinfo helper
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v4 1/6] drm: Add common fdinfo helper
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v11 12/26] gunyah: vm_mgr: Add/remove user memory regions
  • From: Will Deacon <will@xxxxxxxxxx>
• [PATCH V3 3/3] MAINTAINERS: Add the entry for boot_stats driver support
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V3 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V3 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V3 0/3] soc: qcom: boot_stats: Add driver support for boot_stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] drm: Add common fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v4 1/6] drm: Add common fdinfo helper
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH v2] media: venus: fix use after free bug in venus_remove due to race condition
  • From: Zheng Wang <zyytlz.wz@xxxxxxx>
• Re: [PATCH net v2] net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v2] Bluetooth: btusb: Add WCN6855 devcoredump support
  • From: Tim Jiang <quic_tjiang@xxxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-ipq5332 compatible
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH] spmi: Add a check for remove callback when removing a SPMI driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8996-tone: Enable LPG LEDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 2/7] drm/msm: Add MSM-specific DSC helper methods
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/msm/dsi: Add check for slice_width in dsi_timing_setup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 2/4] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH v6 1/7] drm/msm/dsi: use new helpers for DSC setup
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v6 2/7] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 0/7] Introduce MSM-specific DSC helpers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 1/7] drm/msm/dsi: use new helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 3/7] drm/msm/dpu: Use DRM DSC helper for det_thresh_flatness
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 4/7] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 7/7] drm/msm/dsi: Fix calculation for pkt_per_line
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 6/7] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v6 5/7] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v4 6/6] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 5/6] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 4/6] drm/i915: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 3/6] drm/amdgpu: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 2/6] drm/msm: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 1/6] drm: Add common fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 0/6] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v5 6/8] drm/msm/dsi: Add check for slice_width in dsi_timing_setup
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 5/7] drm/etnaviv: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v5 2/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: initialize GMU mutex earlier
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v11 12/26] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v5 1/8] drm/msm/dsi: use new helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 3/4] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8250-edo: Enable Venus
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v8 2/4] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8250-elish-*: Fix panel compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/msm/dsi: Add check for slice_width in dsi_timing_setup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v5 5/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drm/msm/dsi: use new helpers for DSC setup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 0/8] Introduce MSM-specific DSC helpers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 5/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 7/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 4/8] drm/msm/dpu: Fix slice_last_group_size calculation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 1/8] drm/msm/dsi: use new helpers for DSC setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 3/8] drm/msm/dpu: Use DRM DSC helper for det_thresh_flatness
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 8/8] drm/msm/dsi: Fix calculation for pkt_per_line
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 2/8] drm/msm: Add MSM-specific DSC helper methods
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v5 6/8] drm/msm/dsi: Add check for slice_width in dsi_timing_setup
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 4/7] drm/i915: Switch to fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-qcom-qspi: Add DMA mode support
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [PATCH 0/3] Minor updates in the IPQ5332 DTS files
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: qcom_hidma: Add explicit platform_device.h and of_device.h includes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: ipq5332: add few more reserved memory region
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: ipq5332: define UART1
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: ipq5332: rename mi01.2 dts to rdp441
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 2/2] rpmsg: glink: Consolidate TX_DATA and TX_DATA_CONT
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-qcom-qspi: Add DMA mode support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [V2 3/3] spi: spi-qcom-qspi: Add DMA mode support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [V2 2/3] arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [V2 1/3] spi: dt-bindings: qcom,spi-qcom-qspi: Add iommus binding for qspi
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: display/msm: dsi-controller-main: Document qcom,master-dsi and qcom,sync-dual-dsi
  • From: Rob Herring <robh@xxxxxxxxxx>
• [V2 3/3] spi: spi-qcom-qspi: Add DMA mode support
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [V2 0/3] spi: Add DMA mode support to spi-qcom-qspi
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-qcom-qspi: Add DMA mode support
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [V2 1/3] spi: dt-bindings: qcom,spi-qcom-qspi: Add iommus binding for qspi
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• [V2 2/3] arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-qcom-qspi: Add DMA mode support
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH 0/2] spi: Add DMA mode support to spi-qcom-qspi
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Add EMAC3 support for sa8540p-ride (devicetree/clk bits)
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add EMAC3 support for sa8540p-ride
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom,gcc-msm8953: split to separate schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: clock: qcom,gcc-sc7280: document CX power domain
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: qcom,gcc-sm8250: add missing bi_tcxo_ao clock
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/7] drm/i915: Switch to fdinfo helper
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: media: qcom,sdm845-venus-v2: Allow interconnect properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3] clk: qcom: dispcc-qcm2290: Fix GPLL0_OUT_DIV handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/3] clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] clk: qcom: dispcc-qcm2290: Fix BI_TCXO_AO handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] QCM2290 dispcc fixups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] media: videobuf2: Don't assert held reservation lock for dma-buf mmapping
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iommu: Convert QCOM IOMMU to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: soc: qcom: Add RPM Master stats
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: soc: qcom: Add RPM Master stats
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH v3 4/7] drm/i915: Switch to fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH] clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v6 05/11] dt-bindings: qcom-qce: Fix compatible combinations for SM8150 and IPQ4019 SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 4/7] drm/i915: Switch to fdinfo helper
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] drm: fdinfo memory stats
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [GIT PULL] pinctrl: dt-bindings: qcom: unevaluatedProperties cleanup for v6.4
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/7] drm: fdinfo memory stats
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 00/11] arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [GIT PULL] pinctrl: dt-bindings: qcom: unevaluatedProperties cleanup for v6.4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/40] dt-bindings: pinctrl: qcom,ipq5332-tlmm: simplify with unevaluatedProperties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Mike Leach <mike.leach@xxxxxxxxxx>
• Re: [PATCH v3 0/7] drm: fdinfo memory stats
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Mike Leach <mike.leach@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: net: Convert ATH10K to YAML
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 5/7] drm/etnaviv: Switch to fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 3/7] drm/amdgpu: Switch to fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 1/7] drm: Add common fdinfo helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 6/7] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH net-next v4 12/12] net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 11/12] net: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speeds
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH net-next v4 10/12] net: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delay
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 07/12] net: stmmac: Remove some unnecessary void pointers
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 09/12] net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsets
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 06/12] net: stmmac: Fix DMA typo
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 05/12] net: stmmac: Remove unnecessary if statement brackets
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH net-next v4 08/12] net: stmmac: Pass stmmac_priv in some callbacks
  • From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 6/7] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 7/7] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 5/7] drm/etnaviv: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 4/7] drm/i915: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 3/7] drm/amdgpu: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 2/7] drm/msm: Switch to fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 1/7] drm: Add common fdinfo helper
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v3 0/7] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Marijn Suijten as drm/msm reviewer
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Add Marijn Suijten as drm/msm reviewer
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFT v2 01/14] dt-bindings: clock: qcom,rpmcc: Add a way to enable unused clock cleanup
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v11 12/26] gunyah: vm_mgr: Add/remove user memory regions
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v11 13/26] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH] drm/msm/dpu: add DSC range checking during resource reservation
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v11 13/26] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Alex Elder <alex.elder@xxxxxxxxxx>
• Re: [PATCH v11 13/26] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH] drm/msm/dpu: always program dsc active bits
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v11 12/26] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH net-next v4 00/12] Add EMAC3 support for sa8540p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v11 10/26] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v11 12/26] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8155p-adp: Make compatible the first property
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v4 2/3] arm64: dts: qcom: sc8280xp: Add ethernet nodes
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v4 1/3] clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v4 0/3] Add EMAC3 support for sa8540p-ride (devicetree/clk bits)
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 10/12] net: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delay
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 12/12] net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 11/12] net: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speeds
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 08/12] net: stmmac: Pass stmmac_priv in some callbacks
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 06/12] net: stmmac: Fix DMA typo
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 05/12] net: stmmac: Remove unnecessary if statement brackets
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 09/12] net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsets
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 07/12] net: stmmac: Remove some unnecessary void pointers
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 04/12] dt-bindings: net: qcom,ethqos: Add Qualcomm sc8280xp compatibles
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 02/12] dt-bindings: net: snps,dwmac: Add Qualcomm Ethernet ETHQOS compatibles
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 03/12] dt-bindings: net: qcom,ethqos: Convert bindings to yaml
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 01/12] dt-bindings: net: snps,dwmac: Update interrupt-names
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH net-next v4 00/12] Add EMAC3 support for sa8540p-ride
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: msm8974: remove superfluous "input-enable"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: qcom: mdm9615: remove superfluous "input-enable"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: sdm845-shift-axolotl: update focaltech touchscreen properties
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce support for fts touchscreen
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v9 08/10] dt-bindings: msm/dp: Add bindings for HDCP registers
  • From: Mark Yacoub <markyacoub@xxxxxxxxxxxx>
• [PATCH v9 10/10] drm/msm: Implement HDCP 1.x using the new drm HDCP helpers
  • From: Mark Yacoub <markyacoub@xxxxxxxxxxxx>
• [PATCH v9 09/10] arm64: dts: qcom: sc7180: Add support for HDCP in dp-controller
  • From: Mark Yacoub <markyacoub@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/adreno: change adreno_is_* functions to accept const argument
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/adreno: warn if chip revn is verified before being set
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v4] dt-bindings: net: Convert ATH10K to YAML
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/4] SM8150 Kumano updates
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: net: Convert ATH10K to YAML
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next v3 08/12] net: stmmac: Pass stmmac_priv in some callbacks
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 01/40] dt-bindings: pinctrl: qcom,ipq5332-tlmm: simplify with unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable""
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/10] arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Delete a variable initialisation before a null pointer check in two functions
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Delete a variable initialisation before a null pointer check in two functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/7] arm64: dts: qcom: sa8775p: add the pcie smmu node
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v2 5/7] arm64: dts: qcom: sa8775p: add the pcie smmu node
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• [PATCH v2 2/2] drm/msm/adreno: change adreno_is_* functions to accept const argument
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] drm/msm/adreno: warn if chip revn is verified before being set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: net: Convert ATH10K to YAML
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [pull] drm/msm: drm-msm-next-2023-04-10 for v6.4
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 1/2] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 1/2] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [pull] drm/msm: drm-msm-next-2023-04-10 for v6.4
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 0/3] Fix SA8155P RPMPDs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [pull] drm/msm: drm-msm-next-2023-04-10 for v6.4
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v3 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: (subset) [PATCH V4 0/5] Add regulator support for IPQ9574 SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Increase load on l22 and l24 for uSD and eMMC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH] dt-bindings: display/msm: dsi-controller-main: Document qcom,master-dsi and qcom,sync-dual-dsi
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [PATCH 05/10] arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: Mike Leach <mike.leach@xxxxxxxxxx>
• Re: [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/4] SM8150 Kumano updates
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/3] soc: qcom: rpmhpd: Add SA8155P power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: power: qcom,rpmpd: Add SA8155P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/3] Fix SA8155P RPMPDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] mtd: nand: Convert to platform remove callback returning void
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: sa8775p: add UFS nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 6/7] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p Adreno SMMU
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 5/7] arm64: dts: qcom: sa8775p: add the GPU clock controller node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 2/7] clk: qcom: add the GPUCC driver for sa8775p
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 4/7] arm64: dts: qcom: sa8775p: add the pcie smmu node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 3/7] arm64: defconfig: enable the SA8775P GPUCC driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/7] dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 0/7] arm64: dts: qcom: sa8775p: add more IOMMUs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/3] arm64: dts: qcom: Add Qualcomm RB2 board dts
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Increase load on l22 and l24 for uSD and eMMC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH] Revert "dt-bindings: PCI: qcom: Add iommu-map properties"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Increase load on l22 and l24 for uSD and eMMC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Increase load on l22 and l24 for uSD and eMMC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 5/7] arm64: dts: qcom: sa8775p: add the pcie smmu node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3] mtd: nand: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iterconnect: add clk-based icc provider support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: qcom: apq8026: remove superfluous "input-enable"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974: do not use underscore in node name (again)
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8998: don't use GIC_SPI for SPMI interrupts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/3] venus: add firmware version based check
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v5 4/4] drm/msm/dpu: use CTL_SC7280_MASK for sm8450's ctl_0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm: Add fdinfo memory stats
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [pull] drm/msm: drm-msm-next-2023-04-10 for v6.4
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: (subset) [PATCH v3 00/13] Add PCIe RC support to Qcom SDX55 SoC
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v2] PCI: qcom: Add async probe support
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v4 0/1] PCI: qcom: Add support for system suspend and resume
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: (subset) [PATCH v5 00/19] Qcom PCIe cleanups and improvements
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: Convert to platform remove callback returning void
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [RFC 1/2] drm: Add fdinfo memory stats
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 3/3] mmc: sdhci-msm: Switch to the new ICE API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: qrb4210-rb2: Increase load on l22 and l24 for uSD and eMMC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: qcom: Add Qualcomm RB2 board dts
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/5] arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: touchscreen: add bindings for focaltech,fts5452
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] coresight: Add support of setting trace id
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: qcom,gcc-sc7180: document CX power domain
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] soc: qcom: rpmhpd: Do proper power off when state synced
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• RE: [PATCH v1] Bluetooth: btusb: Add WCN6855 devcoredump support
  • From: "Tim Jiang (QUIC)" <quic_tjiang@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: qcom_hidma: Add explicit platform_device.h and of_device.h includes
  • From: Sinan Kaya <franksinankaya@xxxxxxxxx>
• Re: [PATCH v5 4/4] drm/msm/dpu: use CTL_SC7280_MASK for sm8450's ctl_0
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] drm/msm/dpu: enable DSPP and DSC on sc8180x
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] drm/msm/dpu: enable DSPP_2/3 for LM_2/3 on sm8450
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v5 1/4] drm/msm/dpu: enable DPU_CTL_SPLIT_DISPLAY for sc8280xp
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: warn if chip revn is verified before being set
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: John Moon <quic_johmoo@xxxxxxxxxxx>
• [PATCH] dmaengine: qcom_hidma: Add explicit platform_device.h and of_device.h includes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] drm/msm/adreno: fix sparse warnings in a6xx code
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: warn if chip revn is verified before being set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: Add "and" to PIN_CONFIG_INPUT_ENABLE comment
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 12/18] dt-bindings: pinctrl: qcom,pmic-gpio: add compatible for pmm8654au-gpio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/40] dt-bindings: pinctrl: qcom,ipq5332-tlmm: simplify with unevaluatedProperties
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 1/1] soc: qcom: mdt_loader: Enhance split binary detection
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH net-next v3 08/12] net: stmmac: Pass stmmac_priv in some callbacks
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v2 2/2] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v2 0/2] drm: fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v2 1/2] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 2/5] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 0/5] dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 1/5] ARM: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2 5/7] arm64: dts: qcom: sa8775p: add the pcie smmu node
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 3/4] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/4] interconnect: add clk-based icc provider support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: interconnect/msm8996-cbf: add defines to be used by CBF
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 0/4] clk: qcom: msm8996: add support for the CBF clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH] drm/msm/a5xx: really check for A510 in a5xx_gpu_init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: qcom,gcc-sm8250: add missing bi_tcxo_ao clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V3 2/5] clk: qcom: apss-ipq-pll: Add support for IPQ9574
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V3 1/5] dt-bindings: clock: qcom,a53pll: add IPQ9574 compatible
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH] drm/msm/a5xx: really check for A510 in a5xx_gpu_init
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: fix sparse warnings in a6xx code
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 2/7] clk: qcom: add the GPUCC driver for sa8775p
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC 1/2] drm: Add fdinfo memory stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] EDAC/qcom: Get rid of hardcoded register offsets
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: msm8974: remove superfluous "input-enable"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] ARM: dts: qcom: mdm9615: remove superfluous "input-enable"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] ARM: dts: qcom: apq8026: remove superfluous "input-enable"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8974: do not use underscore in node name (again)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 1/1] soc: qcom: mdt_loader: Enhance split binary detection
  • From: Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx>
• [PATCH v8 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] drm/msm/a6xx: initialize GMU mutex earlier
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindints: interconnect/msm8996-cbf: add defines to be used by CBF
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Add base qrb4210-rb2 board dts
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iterconnect: add clk-based icc provider support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/3] mailbox: omap: Use mbox_bind_client
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 3/3] mailbox: pcc: Use mbox_bind_client
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 1/3] mailbox: Allow direct registration to a channel
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3 0/3] mailbox: Allow direct registration to a channel
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] MHI host syserr fixes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: sdm845-shift-axolotl: update focaltech touchscreen properties
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 2/5] Input: add driver for Focaltech FTS touchscreen
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce support for fts touchscreen
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: input: touchscreen: add bindings for focaltech,fts5452
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 0/5] Add support for Focaltech FTS Touchscreen
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• [PATCH v2 1/2] bus: mhi: host: Remove duplicate ee check for syserr
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH v2 0/2] MHI host syserr fixes
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH v2 2/2] bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] EDAC/qcom: Get rid of hardcoded register offsets
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: iommu: arm,smmu: enable clocks for sa8775p
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 4/9] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v6 0/8] Add multiport support for DWC3 controllers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 4/9] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH RESEND v2 1/2] phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [pull] drm/msm: drm-msm-next-2023-04-10 for v6.4
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v6 0/5] Refactor to support multiple download mode
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 3/4] media: camss: vfe-480: Multiple outputs support for SM8250
  • From: <quic_mmitkov@xxxxxxxxxxx>
• [PATCH v8 4/4] media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels
  • From: <quic_mmitkov@xxxxxxxxxxx>
• [PATCH v8 2/4] media: camss: vfe: Reserve VFE lines on stream start and link to CSID
  • From: <quic_mmitkov@xxxxxxxxxxx>
• [PATCH v8 1/4] media: camss: sm8250: Virtual channels for CSID
  • From: <quic_mmitkov@xxxxxxxxxxx>
• [PATCH v8 0/4] media: camss: sm8250: Virtual channels support for SM8250
  • From: <quic_mmitkov@xxxxxxxxxxx>
• [PATCH V12 4/4] arm64: defconfig: Enable IPQ9574 SoC base configs
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V12 1/4] dt-bindings: clock: Add ipq9574 clock and reset definitions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V12 0/4] Add minimal boot support for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH] coresight: Add support of setting trace id
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH V6] bus: mhi: host: Avoid ringing EV DB if there is no elements to process
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v5 1/2] check-uapi: Introduce check-uapi.sh
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH v2] Bluetooth: btusb: Add WCN6855 devcoredump support
  • From: Tim Jiang <quic_tjiang@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH net v2] net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v1] Bluetooth: btusb: Add WCN6855 devcoredump support
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH V2 6/9] dt-bindings: pinctrl: qcom: Add few missing functions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH] mtd: nand: Convert to platform remove callback returning void
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• RE: [PATCH v1] Bluetooth: btusb: Add WCN6855 devcoredump support
  • From: "Tim Jiang (QUIC)" <quic_tjiang@xxxxxxxxxxx>
• [PATCH net v2] net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net] net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: display: msm: sm8350-mdss: Fix DSI compatible
  • From: David Heidelberg <david.heidelberg@xxxxxxxxxxxxx>
• [PATCH] dma: gpi: remove spurious unlock in gpi_ch_init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v7 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v7 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: pm8998: don't use GIC_SPI for SPMI interrupts
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] venus: enable sufficient sequence change support for vp9
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] venus: fix EOS handling in decoder stop command
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next PATCH v6 13/16] ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [RFC PATCH] drm/msm/a5xx: really check for A510 in a5xx_gpu_init
  • From: Adam Skl <a39.skl@xxxxxxxxx>
• Re: [RFC 2/2] drm/msm: Add memory stats to fdinfo
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 2/5] Input: add driver for Focaltech FTS touchscreen
  • From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
• Re: [PATCH 2/5] Input: add driver for Focaltech FTS touchscreen
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v7 2/3] scsi: ufs: ufs-qcom: Switch to the new ICE API
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/3] venus: add firmware version based check
  • From: Stanimir Varbanov <stanimir.k.varbanov@xxxxxxxxx>
• [RFC PATCH] drm/msm/a5xx: really check for A510 in a5xx_gpu_init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>