Re: [PATCH 0/3] Add support for databus widen mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/06/2023 04:57, Jessica Zhang wrote:
DPU 5.x+ and DSI 6G 2.5.x+ support a databus-widen mode that allows for
more compressed data to be transferred per pclk.

This series adds support for enabling this feature for both DPU and DSI
by doing the following:

1. Add a DPU_INTF_DATABUS_WIDEN feature flag
2. Add a DPU INTF op to set the DATABUS_WIDEN register
3. Set the DATABUS_WIDEN register and do the proper hdisplay
    calculations in DSI when applicable

As I was writing the documentation patch, another thought stroke me wrt this patchset. Could you please add a check to DSI's mode_valid disallowing all modes if DSI_BPP > 8 & !widebus. Technically this check does not filter modes per se, but in my opinion ending up with empty modes list would be a better user experience compared to having a list of modes, from which none can be selected.

And if we ever get dynamic mode/dsc_config setup, this would allow us to filter unsupported modes via their DSC confiuration.

Abhinav, I remember, that you told me that adding drm_dsc_config to drm modes was forbidden already. However this looks like a valid reason to maybe restart the discussion: we want to filter modes basing on the corresponding DSC data rather than allowing the mode in mode_valid() and then failing it in the atomic_check().


Note: This series will only enable the databus-widen mode for command
mode as we are currently unable to validate it on video mode.

Depends on: "Add DSC v1.2 Support for DSI" [1]

[1] https://patchwork.freedesktop.org/series/117219/

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>

Nit: there is no need to sign-off the cover letters.

---
Jessica Zhang (3):
       drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
       drm/msm/dpu: Set DATABUS_WIDEN on command mode encoders
       drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode

  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  3 +++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c       |  3 ++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h       |  2 ++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          | 12 ++++++++++++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h          |  3 +++
  drivers/gpu/drm/msm/dsi/dsi.xml.h                    |  1 +
  drivers/gpu/drm/msm/dsi/dsi_host.c                   | 19 ++++++++++++++++++-
  7 files changed, 41 insertions(+), 2 deletions(-)
---
base-commit: 1981c2c0c05f5d7fe4d4552d4f352cb46840e51e
change-id: 20230525-add-widebus-support-f785546ee751

Best regards,

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux