Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35. Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx> --- Changes in V4: - Added patch dependency. This change depends on below patch set https://lore.kernel.org/linux-arm-msm/20230615090001.10970-1-quic_sridsn@xxxxxxxxxxx/ Changes in V3: - Updated patch series title. Mentioned platform in series title Changes in V2: - Used the hypen in node name instead of underscore - Dropped the status property .../boot/dts/qcom/ipq5332-rdp-common.dtsi | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi index 97dc0e5c15f0..a8671a4ac2e4 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi @@ -19,6 +19,31 @@ chosen { stdout-path = "serial0"; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; }; &blsp1_i2c1 { @@ -52,6 +77,20 @@ /* PINCTRL */ &tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default-state { + pins = "gpio36"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + i2c_1_pins: i2c-1-state { pins = "gpio29", "gpio30"; function = "blsp1_i2c0"; -- 2.17.1
