Re: [PATCH V4 0/4] Add camera clock controller support for SM8550

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/9/2023 6:24 PM, Konrad Dybcio wrote:


On 9.06.2023 13:50, Jagadeesh Kona wrote:
Add bindings, driver and devicetree node for camera clock controller on
SM8550.

Jagadeesh Kona (4):
   dt-bindings: clock: qcom: Add SM8550 camera clock controller
   clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
   clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
   arm64: dts: qcom: sm8550: Add camera clock controller
What's the final verdict on RINGOSC_L etc.?

Konrad

We would like to pass RINGOSC_CAL_L field directly in config->l value itself and reuse existing code rather than adding a separate function for lucid ole pll configure.

Thanks,
Jagadeesh


  .../bindings/clock/qcom,sm8450-camcc.yaml     |    8 +-
  arch/arm64/boot/dts/qcom/sm8550.dtsi          |   15 +
  drivers/clk/qcom/Kconfig                      |    7 +
  drivers/clk/qcom/Makefile                     |    1 +
  drivers/clk/qcom/camcc-sm8550.c               | 3585 +++++++++++++++++
  include/dt-bindings/clock/qcom,sm8550-camcc.h |  187 +
  6 files changed, 3801 insertions(+), 2 deletions(-)
  create mode 100644 drivers/clk/qcom/camcc-sm8550.c
  create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux