Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable WPS buttons

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/14/2023 4:12 PM, Konrad Dybcio wrote:

On 14.06.2023 10:50, Anusha Rao wrote:
Add support for wps buttons on GPIO 37.

Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
---
  .../boot/dts/qcom/ipq9574-rdp-common.dtsi     | 23 +++++++++++++++++++
  1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 999902bc70bd..fd5326dc1773 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -8,6 +8,8 @@
/dts-v1/; +#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
  #include "ipq9574.dtsi"
/ {
@@ -18,6 +20,20 @@
  	chosen {
  		stdout-path = "serial0:115200n8";
  	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
This line is unnecessary, it's set to 'key' by default. With that:
Okay, will address in the next patch.

Thanks,
Anusha
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
+			debounce-interval = <60>;
+		};
+	};
  };
&blsp1_spi0 {
@@ -114,6 +130,13 @@
  		drive-strength = <8>;
  		bias-disable;
  	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
  };
&xo_board_clk {




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux