Re: [PATCH v3 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 13, 2023 at 04:50:08PM +0200, neil.armstrong@xxxxxxxxxx wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> 
> Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
> and DisplayPort ALT Mode Linear Redriver chip found on some devices
> with a Type-C port.
> 
> The redriver compensates ultra High-Speeed DisplayPort and USB
> Super Speed signal integrity losses mainly due to PCB & transmission
> cables.
> 
> The redriver doesn't support SuperSpeed lines swapping, but
> can support Type-C SBU lines swapping.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  drivers/usb/typec/mux/Kconfig      |   8 +
>  drivers/usb/typec/mux/Makefile     |   1 +
>  drivers/usb/typec/mux/nb7vpq904m.c | 529 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 538 insertions(+)

I get the following build error on my system with this applied:

  CC [M]  drivers/usb/typec/mux/nb7vpq904m.o
drivers/usb/typec/mux/nb7vpq904m.c: In function ‘nb7vpq904m_register_bridge’:
drivers/usb/typec/mux/nb7vpq904m.c:327:20: error: ‘struct drm_bridge’ has no member named ‘of_node’
  327 |         nb7->bridge.of_node = nb7->client->dev.of_node;
      |                    ^


What went wrong?

thanks,

greg k-h



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux