Linux Advanced Configuration and Power Interface (ACPI)

• Thread Index

• [PATCHv3 3/4] x86/64/kexec: Map original relocate_kernel() in init_transition_pgtable()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• Re: ACPI IRQ storm with 6.10
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: ACPI IRQ storm with 6.10
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH] cpufreq: CPPC: Return desired perf in ->get() if feedback counters are 0
  • From: Jie Zhan <zhanjie9@xxxxxxxxxxxxx>
• Re: [PATCH v11 01/14] EDAC: Add support for EDAC device feature's control
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v11 04/14] cxl/mbox: Add GET_SUPPORTED_FEATURES mailbox command
  • From: kernel test robot <lkp@xxxxxxxxx>
• issue with Asus Vivobook keyboard
  • From: Lamome Julien <julien.lamome@xxxxxxxxxx>
• Re: [PATCH v11 14/14] cxl/memfeature: Add CXL memory device PPR control feature
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v11 01/14] EDAC: Add support for EDAC device feature's control
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: ACPI IRQ storm with 6.10
  • From: Petr Valenta <petr@xxxxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS 413e2254b7a67f21e05791073f95ad41e0a54593
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: ACPI IRQ storm with 6.10
  • From: Petr Valenta <petr@xxxxxxxxxxx>
• Re: [PATCH v11 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [GIT PULL] ACPI fix for v6.11-rc4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: ACPI IRQ storm with 6.10
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [GIT PULL] ACPI fix for v6.11-rc4
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v11 14/14] cxl/memfeature: Add CXL memory device PPR control feature
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 13/14] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 12/14] EDAC: Add EDAC PPR control driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 11/14] ras: mem: Add memory ACPI RAS2 driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 10/14] ACPI:RAS2: Add ACPI RAS2 driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 09/14] platform: Add __free() based cleanup function for platform_device_put
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 08/14] cxl/memfeature: Add CXL memory device ECS control feature
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 06/14] cxl/mbox: Add SET_FEATURE mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 02/14] EDAC: Add EDAC scrub control driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 05/14] cxl/mbox: Add GET_FEATURE mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 04/14] cxl/mbox: Add GET_SUPPORTED_FEATURES mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 03/14] EDAC: Add EDAC ECS control driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v11 01/14] EDAC: Add support for EDAC device feature's control
  • From: <shiju.jose@xxxxxxxxxx>
• Re: [PATCH] ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] ACPI: ARM64: add acpi_iort.h to MAINTAINERS
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] ACPI: PCI: check if the io space is page aligned
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] ACPI: PCI: check if the io space is page aligned
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 6/6] rust: cpufreq: Add rust implementation of cppc_cpufreq driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 6/6] rust: cpufreq: Add rust implementation of cppc_cpufreq driver
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [PATCH v4 4/4] EDAC/mce_amd: Add support for FRU Text in MCA
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v4 3/4] x86/mce/apei: Handle variable register array size
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v4 2/4] x86/mce, EDAC/mce_amd: Add support for new MCA_SYND{1,2} registers
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v4 1/4] x86/mce: Add wrapper for struct mce to export vendor specific info
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v4 0/4] MCE wrapper and support for new SMCA syndrome MSRs
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS 952e74cd01acff951b2373c9cd27cf34e79000af
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/8] iommu/arm-smmu-v3: Use S2FWB when available
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• RE: [PATCH 2/8] iommu/arm-smmu-v3: Use S2FWB when available
  • From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>
• Re: [RFC PATCH 6/6] rust: cpufreq: Add rust implementation of cppc_cpufreq driver
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [RFC PATCH 6/6] rust: cpufreq: Add rust implementation of cppc_cpufreq driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv2 1/4] x86/mm/ident_map: Fix virtual address wrap to zero
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCHv2 3/4] x86/64/kexec: Map original relocate_kernel() in init_transition_pgtable()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/4] x86/mm/ident_map: Fix virtual address wrap to zero
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [RFC PATCH 6/6] rust: cpufreq: Add rust implementation of cppc_cpufreq driver
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 5/6] rust: bindings: Add bindings for rcppc_cpufreq driver
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 4/6] rust: cpufreq: Add methods to struct Cpufreq
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 3/6] rust: module: Allow modules to specify initcall section
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 2/6] cpufreq: cppc: Remove perf_fb_ctrs field from struct cppc_cpudata
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 1/6] ACPI: CPPC: Move struct cppc_cpudata to cppc_cpufreq driver
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• [RFC PATCH 0/6] rust: cpufreq: Add cppc_cpufreq driver implementation
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• Re: [PATCHv2 3/4] x86/64/kexec: Map original relocate_kernel() in init_transition_pgtable()
  • From: Baoquan He <bhe@xxxxxxxxxx>
• Re: [PATCH v3] ACPI: PCI: check if the root io space is page aligned
  • From: Miao Wang <shankerwangmiao@xxxxxxxxx>
• Re: [PATCH 0/3] ACPI/video / platform/x86: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCHv2 1/4] x86/mm/ident_map: Fix virtual address wrap to zero
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS 6b6b6fb5ac6f22cb7858ab79e7d93106efaf72a6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 3/3] ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/3] ACPI/video / platform/x86: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/3] platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] ACPI: video: Add Dell UART backlight controller detection
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3] ACPI: PCI: check if the root io space is page aligned
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCHv2 4/4] x86/64/kexec: Rewrite init_transition_pgtable() with kernel_ident_mapping_init()
  • From: Tom Lendacky <thomas.lendacky@xxxxxxx>
• Re: [PATCHv2 2/4] x86/acpi: Replace manual page table initialization with kernel_ident_mapping_init()
  • From: Tom Lendacky <thomas.lendacky@xxxxxxx>
• Re: [PATCHv2 1/4] x86/mm/ident_map: Fix virtual address wrap to zero
  • From: Tom Lendacky <thomas.lendacky@xxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCHv2 3/4] x86/64/kexec: Map original relocate_kernel() in init_transition_pgtable()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCHv2 4/4] x86/64/kexec: Rewrite init_transition_pgtable() with kernel_ident_mapping_init()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCHv2 1/4] x86/mm/ident_map: Fix virtual address wrap to zero
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCHv2 0/4] x86: Reduce code duplication on page table initialization
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCHv2 2/4] x86/acpi: Replace manual page table initialization with kernel_ident_mapping_init()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3] ACPI: PCI: check if the root io space is page aligned
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• Re: [PATCH v2] ACPI: PCI: check if the io space is page aligned
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: serial: Allow embedded-controller as child node
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v3 0/3] OF support for Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: ACPI IRQ storm with 6.10
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 01/17] arm64: PCI: Migrate ACPI related functions to pci-acpi.c
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• ACPI IRQ storm with 6.10
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v2] ACPI: PCI: check if the io space is page aligned
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• [PATCH] ACPI: PCI: check if the io space is page aligned
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• [rafael-pm:bleeding-edge 84/99] drivers/thermal/thermal_core.c:1012:13: error: invalid storage class for function 'thermal_zone_cdev_binding'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/8] iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [rafael-pm:bleeding-edge 81/99] drivers/thermal/thermal_core.c:862:37: error: 'struct thermal_instance' has no member named 'tz_node'; did you mean 'trip_node'?
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• RE: [PATCH] ACPI: RISCV: Make acpi_numa_get_nid() to be static
  • From: "Xu, Haibo1" <haibo1.xu@xxxxxxxxx>
• Re: [PATCH][next] ACPI: align slab for improved memory performance
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• RE: [PATCH][next] ACPI: align slab for improved memory performance
  • From: "King, Colin" <colin.king@xxxxxxxxx>
• Re: [PATCH][next] ACPI: align slab for improved memory performance
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• RE: [PATCH][next] ACPI: align slab for improved memory performance
  • From: "King, Colin" <colin.king@xxxxxxxxx>
• Re: [PATCH][next] ACPI: align slab for improved memory performance
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS 808a033fe41be80da178cbe47a1b013eb6d048a6
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v8 01/17] arm64: PCI: Migrate ACPI related functions to pci-acpi.c
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] ACPI: APD: Add AMDI0015 as platform device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v2] ACPI: APD: Add AMDI0015 as platform device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v1 0/3] ACPI: EC: Avoid evaluating _REG for non-functional operation regions
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 1/3] Revert "ACPI: EC: Evaluate orphan _REG under EC device"
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 2/3] ACPICA: Add a depth argument to acpi_execute_reg_methods()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 3/3] ACPI: EC: Evaluate _REG outside the EC scope more carefully
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/2] ACPICA: Allow setting waking vector on reduced hardware platforms
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ACPICA: Detect FACS in reduced hardware build
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] S3 wakeup support for hardware reduced model
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 00/17] RISC-V: ACPI: Add external interrupt controller support
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 17/17] irqchip/sifive-plic: Add ACPI support
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 16/17] irqchip/riscv-aplic: Add ACPI support
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 15/17] irqchip/riscv-imsic: Add ACPI support
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 14/17] irqchip/riscv-imsic-state: Create separate function for DT
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 13/17] irqchip/riscv-intc: Add ACPI support for AIA
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 12/17] ACPI: RISC-V: Implement function to add implicit dependencies
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 11/17] ACPI: RISC-V: Initialize GSI mapping structures
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 10/17] ACPI: RISC-V: Implement function to reorder irqchip probe entries
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 09/17] ACPI: RISC-V: Implement PCI related functionality
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 08/17] ACPI: pci_link: Clear the dependencies after probe
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 07/17] ACPI: bus: Add RINTC IRQ model for RISC-V
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 06/17] ACPI: scan: Define weak function to populate dependencies
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 05/17] ACPI: scan: Add RISC-V interrupt controllers to honor list
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 04/17] ACPI: scan: Refactor dependency creation
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 03/17] ACPI: bus: Add acpi_riscv_init() function
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 02/17] ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 01/17] arm64: PCI: Migrate ACPI related functions to pci-acpi.c
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• [PATCH v8 00/17] RISC-V: ACPI: Add external interrupt controller support
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: serial: Allow embedded-controller as child node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• [PATCH v2 3/4] ARM64: ACPI: Make acpi_numa_get_nid() invisible to kernel/smp.c
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH v2 0/4] Cleanups for ARM64 ACPI
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH v2 4/4] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH v2 1/4] ARM64: ACPI: Remove the leftover acpi_init_cpus()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH v2 2/4] ARM64: ACPI: Remove the leftover arm64_acpi_numa_init()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH] ACPI: RISCV: Make acpi_numa_get_nid() to be static
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v2 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v2 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v2 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS a809d5e5c7b50d2c56470e10c7ef27cfef23a374
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v2 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: serial: Allow embedded-controller as child node
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v2 0/3] OF support for Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• Re: [PATCH 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] x86/hyperv: Mark ACPI wakeup mailbox page as private
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• Re: [PATCH 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• RE: [PATCH v2 1/1] power: reset: pwr-mlxbf: support graceful shutdown
  • From: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
• Re: [PATCH 3/8] ACPI/IORT: Support CANWBS memory access flag
  • From: Nicolin Chen <nicolinc@xxxxxxxxxx>
• Re: [PATCH 6/8] iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 3/3] platform/surface: Add OF support
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 7/8] iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Armin Wolf <W_Armin@xxxxxx>
• Re: [PATCH 6/8] iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH 7/8] iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v1] ACPI: APD: Add AMDI0015 as platform device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] ACPI: APD: Add AMDI0015 as platform device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [no subject]
  • From: Unknown
• RE: [PATCH 3/8] ACPI/IORT: Support CANWBS memory access flag
  • From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>
• Re: [PATCH 2/8] iommu/arm-smmu-v3: Use S2FWB when available
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH 6/8] iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 3/8] ACPI/IORT: Support CANWBS memory access flag
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• RE: [PATCH 3/8] ACPI/IORT: Support CANWBS memory access flag
  • From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>
• RE: [PATCH 2/8] iommu/arm-smmu-v3: Use S2FWB when available
  • From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>
• Re: [PATCH] ACPI: ARM64: add acpi_iort.h to MAINTAINERS
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH] gpiolib: put gpio_suffixes in a single compilation unit
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: put gpio_suffixes in a single compilation unit
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] ACPI/IORT: Switch to use kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH 3/3] platform/surface: Add OF support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: platform: Add Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: serial: Allow embedded-controller as child node
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 0/3] OF support for Surface System Aggregator Module
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH][next] ACPI: align slab for improved memory performance
  • From: Colin Ian King <colin.king@xxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 1/3] ARM64: ACPI: Remove the leftover acpi_init_cpus()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH 2/3] ARM64: ACPI: Remove the leftover arm64_acpi_numa_init()
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH 3/3] ARM64: ACPI: Move the NUMA code to drivers/acpi/arm64/
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH 0/3] cleanups for ARM64 ACPI
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH] ACPI: ARM64: add acpi_iort.h to MAINTAINERS
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v3] ACPI: introduce acpi_arch_init
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• [PATCH v3] ACPI: introduce acpi_arch_init
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• Re: [PATCH v2] ACPI: introduce acpi_arch_init
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] ACPI: extlog: Trace CPER PCI Express Error Section
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 2/2] ACPI: extlog: Trace CPER PCI Express Error Section
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 1/8] vfio: Remove VFIO_TYPE1_NESTING_IOMMU
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: [PATCH 6/7] x86/hyperv: Reserve real mode when ACPI wakeup mailbox is available
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] x86/hyperv: Mark ACPI wakeup mailbox page as private
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] x86/dt: Support the ACPI multiprocessor wakeup for device tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [rafael-pm:intel_pstate-testing] [cpufreq] 4a8311d560: WARNING:at_arch/x86/kernel/cpu/aperfmperf.c:#arch_set_cpu_capacity
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH] acpi video: force native for Apple MacbookPro9,2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] ACPI: introduce acpi_arch_init
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH v4 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 21/26] mm: numa_memblks: make several functions and variables static
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 19/26] mm: introduce numa_emulation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 17/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 16/26] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 15/26] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 14/26] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 13/26] x86/numa_emu: simplify allocation of phys_dist
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 12/26] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 10/26] x86/numa: simplify numa_distance allocation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 08/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 07/26] arch, mm: move definition of node_data to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 05/26] MIPS: loongson64: rename __node_data to node_data
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 01/26] mm: move kernel/numa.c to mm/
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 00/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2] ACPI: introduce acpi_arch_init
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/4] use device_for_each_child_node() to access device child nodes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH 1/8] vfio: Remove VFIO_TYPE1_NESTING_IOMMU
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 6/8] iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 7/8] iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 8/8] iommu/arm-smmu-v3: Add arm_smmu_cache_invalidate_user
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 3/8] ACPI/IORT: Support CANWBS memory access flag
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 2/8] iommu/arm-smmu-v3: Use S2FWB when available
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 0/8] Initial support for SMMUv3 nested translation
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 4/8] iommu/arm-smmu-v3: Report IOMMU_CAP_ENFORCE_CACHE_COHERENCY for CANWBS
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 5/8] iommu/arm-smmu-v3: Support IOMMU_GET_HW_INFO via struct arm_smmu_hw_info
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 7/7] x86/hyperv: Use the ACPI wakeup mailbox for VTL2 guests when available
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 6/7] x86/hyperv: Reserve real mode when ACPI wakeup mailbox is available
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 5/7] x86/hyperv: Mark ACPI wakeup mailbox page as private
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 4/7] x86/hyperv: Parse the ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 3/7] x86/dt: Support the ACPI multiprocessor wakeup for device tree
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 1/7] x86/acpi: Move ACPI MADT wakeup to generic code
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 0/7] x86/acpi: Move ACPI MADT wakeup to generic code
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ACPI: extlog: Trace CPER PCI Express Error Section
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] ACPI: extlog: Trace CPER Non-standard Section Body
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: (subset) [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH] acpi video: force native for Apple MacbookPro9,2
  • From: Esther Shimanovich <eshimanovich@xxxxxxxxxxxx>
• Re: [PATCH 2/2] ACPI: extlog: Trace CPER PCI Express Error Section
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ACPI: extlog: Trace CPER Non-standard Section Body
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v14 07/10] iommu/arm-smmu-v3: Maintain a SID->device structure
  • From: niliqiang <ni_liqiang@xxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [BUG REPORT]net: page_pool: kernel crash at iommu_get_dma_domain+0xc/0x20
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 24/26] arch_numa: switch over to numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 21/26] mm: numa_memblks: make several functions and variables static
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 17/26] mm: introduce numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 16/26] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 15/26] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 14/26] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 13/26] x86/numa_emu: simplify allocation of phys_dist
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 12/26] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 10/26] x86/numa: simplify numa_distance allocation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [BUG REPORT]net: page_pool: kernel crash at iommu_get_dma_domain+0xc/0x20
  • From: Jesper Dangaard Brouer <hawk@xxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• RE: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: Peter Kästle <peter@xxxxxxxx>
• Re: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] device property: document device_for_each_child_node macro
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• RE: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• RE: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• RE: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH v3 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 3/4] net: mvpp2: use port_count to remove ports
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 1/4] device property: document device_for_each_child_node macro
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 0/4] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 2/4] PCI: Rename pci_bridge_d3_possible() to pci_bridge_d3_allowed()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 4/5] efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v3 1/5] RAS: Report all ARM processor CPER information to userspace
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v3 0/5] Fix issues with ARM Processor CPER records
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH RESEND v4] x86/acpi: fix panic while AP online later with kernel parameter maxcpus=1
  • From: Zhiquan Li <zhiquan1.li@xxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ACPICA: Allow setting waking vector in reduced hardware model
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ACPICA: Detect FACS in reduced hardware model
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 0/2] ACPICA: S3 wakeup support for hardware reduced model
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Saurabh Singh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 6/6] ACPI: bus: Define and use a macro for device and class name length.
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• [PATCH v2 5/6] ACPI: button: Use strscpy instead of strcpy.
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• [PATCH v2 4/6] ACPI: battery : Use strscpy instead of strcpy.
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• [PATCH v2 3/6] ACPI: acpi_processor: Use strscpy instead of strcpy.
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• [PATCH v2 2/6] ACPI: acpi_pad: Use strscpy instead of strcpy.
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• [PATCH v2 1/6] ACPI: ac: Use strscpy() instead of strcpy().
  • From: Muhammad Qasim Abdul Majeed <qasim.majeed20@xxxxxxxxx>
• Re: [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS bc51a513ebf760f50371d3771321f27f4a65c755
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/4] x86/mce: Add wrapper for struct mce to export vendor specific info
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 2/4] PCI: Rename pci_bridge_d3_possible() to pci_bridge_d3_allowed()
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH V2] ACPI: resource: Do IRQ override on MECHREV GM7XG0M
  • From: Li Chen <me@linux.beauty>
• Re: [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] ACPI: CPPC: Fix MASK_VAL() usage
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 24/26] arch_numa: switch over to numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] ACPI: processor: Silence per-cpu acpi_handle_info about idle states
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_convert_to_package ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] Updating a deprecated use of strcpy in ac.c file.
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/1] ACPI: battery: Remove redundant NULL initalizations
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 3/4] Updating a deprecated use of strcpy in battry.c file.
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v14 07/10] iommu/arm-smmu-v3: Maintain a SID->device structure
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 21/26] mm: numa_memblks: make several functions and variables static
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 17/26] mm: introduce numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 10/26] x86/numa: simplify numa_distance allocation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v5 2/4] PCI: Rename pci_bridge_d3_possible() to pci_bridge_d3_allowed()
  • From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
• [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
• [PATCH v5 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
• [PATCH v5 1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility
  • From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
• [PATCH v5 0/4] PCI: Allow D3Hot for PCI bridges in Devicetree based platforms
  • From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Parse the HEST PCIe AER and set to relevant registers
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI/ACPI: Increase the number of Loongson's PCI host up to 8
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH v3 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v14 07/10] iommu/arm-smmu-v3: Maintain a SID->device structure
  • From: niliqiang <ni_liqiang@xxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/2] PRM handler direct call interface
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v3 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 24/26] arch_numa: switch over to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 21/26] mm: numa_memblks: make several functions and variables static
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 19/26] mm: introduce numa_emulation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 17/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 16/26] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 15/26] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 14/26] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 13/26] x86/numa_emu: simplify allocation of phys_dist
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 12/26] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 10/26] x86/numa: simplify numa_distance allocation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 08/26] arch, mm: move definition of node_data to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 07/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 05/26] MIPS: loongson64: rename __node_data to node_data
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 01/26] mm: move kernel/numa.c to mm/
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH] acpi/prmt: find block with specific type
  • From: KobaK <kobak@xxxxxxxxxx>
• [rafael-pm:thermal-core-testing 5/28] drivers/thermal/tegra/tegra30-tsensor.c:326:22: warning: unused variable 'i'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: Peter Kästle <xypiie@xxxxxxxxx>
• Re: [PATCH v2] ACPI / PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [rafael-pm:thermal-core-testing 2/28] drivers/thermal/hisi_thermal.c:484:29: warning: unused variable 'trip'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 13/17] mlxsw: core_thermal: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH v1 13/17] mlxsw: core_thermal: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1 13/17] mlxsw: core_thermal: Use the .should_bind() thermal zone callback
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• RE: [PATCH v10 00/11] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
  • From: Shiju Jose <shiju.jose@xxxxxxxxxx>
• [rafael-pm:thermal-core-testing 25/28] drivers/thermal/thermal_of.c:321:28: error: use of undeclared identifier 'map_np'
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 1/1] ACPI: battery: Remove redundant NULL initalizations
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH] ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
  • From: Yicong Yang <yangyicong@xxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: "Huang, Ying" <ying.huang@xxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: "Huang, Ying" <ying.huang@xxxxxxxxx>
• [PATCH] ACPI:dbconvert:check null return of ACPI_ALLOCATE_ZEROED in acpi_db_convert_to_package
  • From: xiaopeitux@xxxxxxxxxxx
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: "Huang, Ying" <ying.huang@xxxxxxxxx>
• [PATCH v2] ACPI / PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
  • From: Aleksandr Mishin <amishin@xxxxxxxxxx>
• Re: [PATCH v10 00/11] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
  • From: Fan Ni <nifan.cxl@xxxxxxxxx>
• Re: [PATCH] ACPI / PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 00/17] thermal: Rework binding cooling devices to trip points
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v1 10/17] thermal: core: Unexport thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 05/17] thermal: core: Move lists of thermal instances to trip descriptors
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v3 4/4] EDAC/mce_amd: Add support for FRU Text in MCA
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v3 3/4] x86/mce/apei: Handle variable register array size
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v3 2/4] x86/mce, EDAC/mce_amd: Add support for new MCA_SYND{1,2} registers
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v3 1/4] x86/mce: Add wrapper for struct mce to export vendor specific info
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v3 0/4] MCE wrapper and support for new SMCA syndrome MSRs
  • From: Avadhut Naik <avadhut.naik@xxxxxxx>
• [PATCH v1 15/17] thermal: core: Drop unused bind/unbind functions and callbacks
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 11/17] thermal: imx: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 02/17] thermal: core: Rearrange checks in thermal_bind_cdev_to_trip()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 16/17] thermal: code: Clean up trip bind/unbind functions
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 14/17] thermal/of: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 13/17] mlxsw: core_thermal: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 12/17] platform/x86: acerhdf: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 09/17] thermal: ACPI: Use the .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 08/17] thermal: core: Introduce .should_bind() thermal zone callback
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 07/17] thermal: core: Move thermal zone locking out of bind/unbind functions
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 06/17] thermal: sysfs: Use the dev argument in instance-related show/store
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 04/17] thermal: core: Clean up cdev binding/unbinding functions
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 03/17] thermal: core: Drop redundant thermal instance checks
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 01/17] thermal: core: Fold two functions into their respective callers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 00/17] thermal: Rework binding cooling devices to trip points
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 17/17] thermal: code: Pass trip descriptors to trip bind/unbind functions
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• RE: [PATCH v10 01/11] EDAC: Add generic EDAC RAS control feature driver
  • From: Shiju Jose <shiju.jose@xxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• [PATCH v3 2/2] RAS/AMD/ATL: Translate normalized to system physical addresses using PRM
  • From: John Allen <john.allen@xxxxxxx>
• [PATCH v3 1/2] ACPI: PRM: Add PRM handler direct call support
  • From: John Allen <john.allen@xxxxxxx>
• [PATCH v3 0/2] PRM handler direct call interface
  • From: John Allen <john.allen@xxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH v10 01/11] EDAC: Add generic EDAC RAS control feature driver
  • From: Borislav Petkov <bp@xxxxxxxxx>
• RE: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver
  • From: Shiju Jose <shiju.jose@xxxxxxxxxx>
• [rafael-pm:bleeding-edge] BUILD SUCCESS fc9143fe3439b74733b2030b83ebbf9dcb9f5f3d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: "Huang, Ying" <ying.huang@xxxxxxxxx>
• Re: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver
  • From: Fan Ni <nifan.cxl@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: bus: Add Hyper-V VMBus cache coherency and IRQs
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• "EC: Install address space handler at the namespace root" causing issues for some users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: "Huang, Ying" <ying.huang@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 2/2] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 1/2] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/2] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/2] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 2/2] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 1/2] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 2/2] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 1/2] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 2/3] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 1/3] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 8/9] ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MJ
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 7/9] ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 2/9] ACPI: SBS: manage alarm sysfs attribute through psy core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 1/9] ACPI: battery: create alarm sysfs attribute atomically
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: bus: Add Hyper-V VMBus cache coherency and IRQs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 0/4] PCI: Allow D3Hot for PCI bridges in Devicetree based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Hanjun Guo <guohanjun@xxxxxxxxxx>
• Re: [PATCH v4 0/4] PCI: Allow D3Hot for PCI bridges in Devicetree based platforms
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH v4 0/4] PCI: Allow D3Hot for PCI bridges in Devicetree based platforms
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v3 7/7] PCI: hv: Get vPCI MSI IRQ domain from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/7] Drivers: hv: vmbus: Get the IRQ number from DT
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/7] dt-bindings: bus: Add Hyper-V VMBus cache coherency and IRQs
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/7] arm64: hyperv: Boot in a Virtual Trust Level
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/7] Drivers: hv: Provide arch-neutral implementation of get_vtl()
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/7] Drivers: hv: Enable VTL mode for arm64
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/7] arm64: hyperv: Support Virtual Trust Level Boot
  • From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
• [PATCH] acpi/hmat,mm/memtier: always register hmat adist calculation callback
  • From: Gregory Price <gourry@xxxxxxxxxx>
• Re: [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Miao Wang <shankerwangmiao@xxxxxxxxx>
• Re: [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Miao Wang <shankerwangmiao@xxxxxxxxx>
• [PATCH v10 07/11] cxl/memscrub: Add CXL memory device patrol scrub control feature
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 10/11] ACPI:RAS2: Add ACPI RAS2 driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 09/11] platform: Add __free() based cleanup function for platform_device_put
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 08/11] cxl/memscrub: Add CXL memory device ECS control feature
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 06/11] cxl/mbox: Add SET_FEATURE mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 05/11] cxl/mbox: Add GET_FEATURE mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 04/11] cxl/mbox: Add GET_SUPPORTED_FEATURES mailbox command
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 03/11] EDAC: Add EDAC ECS control driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 02/11] EDAC: Add EDAC scrub control driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 01/11] EDAC: Add generic EDAC RAS control feature driver
  • From: <shiju.jose@xxxxxxxxxx>
• [PATCH v10 00/11] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
  • From: <shiju.jose@xxxxxxxxxx>
• Re: [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH] ACPI: rename acpi_arm_init to acpi_arch_init
  • From: Miao Wang via B4 Relay <devnull+shankerwangmiao.gmail.com@xxxxxxxxxx>
• Re: [PATCH v2 00/25] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH] PCI/ACPI: Increase the number of Loongson's PCI host up to 8
  • From: Huacai Chen <chenhuacai@xxxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 1/3] riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
  • From: patchwork-bot+linux-riscv@xxxxxxxxxx
• [rafael-pm:bleeding-edge] BUILD SUCCESS d138ebca836ae9753a88fe6824bcbfeed2f4aef0
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/25] mm: introduce numa_memblks
  • From: Zi Yan <ziy@xxxxxxxxxx>
• Re: [PATCH v2 00/25] mm: introduce numa_memblks
  • From: Zi Yan <ziy@xxxxxxxxxx>
• Re: [PATCH v2 00/25] mm: introduce numa_memblks
  • From: Zi Yan <ziy@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Add ACPI NUMA support for RISC-V
  • From: Haibo Xu <xiaobo55x@xxxxxxxxx>
• Re: [PATCH v4 0/4] Add ACPI NUMA support for RISC-V
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [Bug][Regression] non-stop ACPI ([\_SB.PC00.LPCB.HEC.TSR1]) and thermal zone error
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [Bug][Regression] non-stop ACPI ([\_SB.PC00.LPCB.HEC.TSR1]) and thermal zone error
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [Bug][Regression] non-stop ACPI ([\_SB.PC00.LPCB.HEC.TSR1]) and thermal zone error
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• RE: [RFC PATCH v9 08/11] cxl/memscrub: Add CXL memory device ECS control feature
  • From: Shiju Jose <shiju.jose@xxxxxxxxxx>
• [Bug][Regression] non-stop ACPI ([\_SB.PC00.LPCB.HEC.TSR1]) and thermal zone error
  • From: Tom Yan <tom.ty89@xxxxxxxxx>
• Re: [PATCH v4 1/4] ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  • From: Haibo Xu <xiaobo55x@xxxxxxxxx>
• Re: [PATCH v4 1/4] ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  • From: Anup Patel <apatel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  • From: Haibo Xu <xiaobo55x@xxxxxxxxx>
• Re: [PATCH 0/2] Make ELOG log and trace consistently with GHES
  • From: "Fabio M. De Francesco" <fabio.m.de.francesco@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  • From: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Add ACPI NUMA support for RISC-V
  • From: patchwork-bot+linux-riscv@xxxxxxxxxx
• [PATCH v2 25/25] docs: move numa=fake description to kernel-parameters.txt
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 24/25] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 23/25] arch_numa: switch over to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 22/25] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 21/25] mm: numa_memblks: make several functions and variables static
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 20/25] mm: numa_memblks: introduce numa_memblks_init
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 19/25] mm: introduce numa_emulation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 18/25] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 17/25] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 16/25] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 15/25] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 14/25] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 13/25] x86/numa_emu: simplify allocation of phys_dist
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 12/25] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 11/25] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 10/25] x86/numa: simplify numa_distance allocation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 09/25] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 08/25] arch, mm: move definition of node_data to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 07/25] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 06/25] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 05/25] MIPS: loongson64: rename __node_data to node_data
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 04/25] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 03/25] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 02/25] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 01/25] mm: move kernel/numa.c to mm/
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2 00/25] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 04/17] arch, mm: move definition of node_data to generic code
  • From: Davidlohr Bueso <dave@xxxxxxxxxxxx>
• Re: [RFC KERNEL PATCH v8 3/3] xen/privcmd: Add new syscall to get gsi from dev
  • From: Stefano Stabellini <sstabellini@xxxxxxxxxx>
• Re: [PATCH 00/17] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 15/17] mm: make numa_memblks more self-contained
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 12/17] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 06/17] x86/numa: simplify numa_distance allocation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/17] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 5/6] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 4/6] leds: is31fl319x: use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 3/6] leds: bd2606mvv: fix device child node usage in bd2606mvv_probe()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 15/17] mm: make numa_memblks more self-contained
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 13/17] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 14/17] mm: introduce numa_emulation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 05/17] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v2] ACPI: HMAT: Mark hmat_set_default_dram_perf() as __init
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [RFC PATCH v9 08/11] cxl/memscrub: Add CXL memory device ECS control feature
  • From: fan <nifan.cxl@xxxxxxxxx>
• Re: [PATCH 17/17] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 12/17] mm: introduce numa_memblks
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>