Linux Intel Graphics

• Thread Index

• [PATCH 08/15] drm: set output colorspace in AVI infoframe
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 07/15] drm/edid: parse ycbcr 420 deep color information
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 04/15] drm/edid: cleanup patch for CEA extended-tag macro
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 06/15] drm: add helper to validate YCBCR420 modes
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 02/15] drm/edid: complete CEA modedb(VIC 1-107)
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 05/15] drm/edid: parse YCBCR420 videomodes from EDID
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 03/15] drm/edid: parse sink information before CEA blocks
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 00/15] YCBCR 4:2:0 handling in DRM layer
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 01/15] drm: handle HDMI 2.0 VICs in AVI info-frames
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Gen10 render context size.
  • From: Ben Widawsky <benjamin.widawsky@xxxxxxxxx>
• Re: [PATCH i-g-t v2 2/2] tests/gem_reset_stats: Enforce full chip reset mode before run
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• Re: [PATCH i-g-t 0/5] igt/kms: Make fence waiting explicit.
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH 3/3] intel: Make driver aware of MOCS table version
  • From: Ben Widawsky <ben@xxxxxxxxxxxx>
• [PATCH 1/1] drm/i915: Version the MOCS settings
  • From: Ben Widawsky <ben@xxxxxxxxxxxx>
• [PATCH 0/3] MOCS versioning
  • From: Ben Widawsky <ben@xxxxxxxxxxxx>
• [PATCH 2/3] intel: Merge latest i915 uapi
  • From: Ben Widawsky <ben@xxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Gen10 render context size.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Cannonlake color init.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: ✓ Fi.CI.BAT: success for x86/gpu: CNL uses the same GMS values as SKL
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Add force wake for gen10+.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Enable Audio Pin Buffer.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] drm/i915: Add NV12 support to intel_framebuffer_init
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH i-g-t v2 2/2] tests/gem_reset_stats: Enforce full chip reset mode before run
  • From: Antonio Argenziano <antonio.argenziano@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Cannonlake color init.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] drm/i915: Add NV12 as supported format for sprite plane
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH 6/8] drm/i915: Add NV12 as supported format for primary plane
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH 5/8] drm/i915: Upscale scaler max scale for NV12
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915/cnl: Add allowed DP rates for Cannonlake.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH 4/8] drm/i915: Update format_is_yuv() to include NV12
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH 3/8] drm/i915: Set scaler mode for NV12
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Get DDI clock based on PLLs.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Add max allowed Cannonlake DC.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Inherit RPS stuff from previous platforms.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Cannonlake color init.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix pre-g4x GPU reset, again (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Gen10 render context size.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Enable Audio Pin Buffer.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Cannonlake color init.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 3/3] drm/i915/cnl: Avoid old DDI translation functions on Cannonlake.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 2/3] drm/i915/cnl: Dump the right pll registers when dumping pipe config.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 1/3] drm/i915/cnl: Add allowed DP rates for Cannonlake.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Get DDI clock based on PLLs.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Add max allowed Cannonlake DC.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Inherit RPS stuff from previous platforms.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH v5 22/22] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 18/22] drm: Return the connector from drm_connector_get()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH v3 21/22] drm/atomic: Introduce drm_atomic_helper_duplicate_commited_state()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 20/22] drm/i915: Refactor __intel_atomic_commit_tail()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 19/22] drm/i915% Store vma gtt offset in plane state
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 17/22] drm/atomic: Fix up the kernel docs for the state duplication functions
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 14/22] drm/arm: s/old_state/old_mali_state/
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 12/22] drm/atomic: Make private objs proper objects
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 11/22] drm/atomic: Convert private_objs to drm_dynarray
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 16/22] drm/atomic: Pass old state explicitly to .atomic_duplicate_state()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 15/22] drm/mediatek: s/old_state/old_mtk_state/
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 13/22] drm/atomic: Pass old state to __drm_atomic_helper_crtc_duplicate_state() & co. explicitly
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 09/22] drm/atomic: Convert state->connectors to drm_dynarray
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 10/22] drm/atomic: Remove pointless private object NULL state check
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 08/22] drm: Add drm_dynarray
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 07/22] drm/i915: Eliminate crtc->state usage from intel_atomic_commit_tail and .crtc_update()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 06/22] drm/i915: Eliminate crtc->state usage from intel_update_pipe_config()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 05/22] drm/i915: Eliminate obj->state usage from pre/post plane update
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 04/22] drm/i915: Pass proper old/new states to intel_plane_atomic_check_with_state()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 03/22] drm/i915: Eliminate obj->state usage in g4x/vlv/chv wm computation
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 02/22] drm/i915: Pass the crtc state explicitly to intel_pipe_update_start/end()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 01/22] drm/i915: Pass the new crtc state to color management code
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH v2 00/22] drm/i915: Fix pre-g4x GPU reset, again (v2)
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [maintainer-tools RFC PATCH] drm-intel: Link to .html instead of .rst
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [maintainer-tools PATCH] drm-intel: Fix links to torvalds documentation.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915: Disable per-engine reset for Broxton
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/4] drm/i915: Call uncore_suspend before platform suspend handlers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/4] drm/i915: Re-register PMIC bus access notifier on runtime resume
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/4] drm/i915: Fix false-positive assert_rpm_wakelock_held in i915_pmic_bus_access_notifier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC] drm/i915/lrc: allocate separate page for HWSP
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• Re: [RFC] drm/i915/lrc: allocate separate page for HWSP
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t 3/3] tests/gem_reset_stats: Enforce full chip reset mode before run
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Exercise independence of per-engine resets
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• Re: [PATCH] drm/i915: Disable per-engine reset for Broxton
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/lrc: allocate separate page for HWSP
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH i-g-t 5/7] kms_writeback: Add writeback-check-output
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 6/7] lib/igt_kms: Add igt_output_clone_pipe for cloning
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 7/7] kms_writeback: Add tests using a cloned output
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 1/7] igt: lib/igt_crc: Split out CRC functionality
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 4/7] lib: Add function to hash a framebuffer
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 2/7] lib/igt_kms: Add writeback support in lib/
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 0/7] igt: Add support for testing writeback connectors
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [PATCH i-g-t 3/7] kms_writeback: Add initial writeback tests
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• [RFC] drm/i915/lrc: allocate separate page for HWSP
  • From: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>
• Re: [PATCH i-g-t v4 1/3] tests/chamelium: Update connector state without reprobe when possible
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH i-g-t v4 3/3] Make igtrc configuration common, with configurable suspend/resume delay
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Unify the HSW/BDW and GEN9+ power well code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v4 2/3] chamelium: Remove init reset duplicate in favor of per-test reset
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915/fbdev: Always forward hotplug events
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Make fbcon a built-time depency for fbdev, take 2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] drm/i915/bxt: Enable IPC support
  • From: "Lankhorst, Maarten" <maarten.lankhorst@xxxxxxxxx>
• [PATCH 14/18] drm/i915/hsw, bdw: Wait for the power well disabled state
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 16/18] drm/i915/gen9+: Unify the HSW/BDW and GEN9+ power well helpers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 18/18] drm/i915: Gather all the power well->domain mappings to one place
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 17/18] drm/i915: Move hsw_power_well_enable() next to the rest of HSW helpers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 15/18] drm/i915/hsw+: Add has_fuses power well attribute
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 12/18] drm/i915/hsw+: Unify the hsw/bdw and gen9+ power well req/state macros
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 11/18] drm/i915/hsw, bdw: Split power well set to enable/disable helpers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 13/18] drm/i915/hsw, bdw: Add irq_pipe_mask, has_vga power well attributes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 10/18] drm/i915/hsw, bdw: Remove redundant state check during power well toggling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 08/18] drm/i915/gen9+: Remove redundant power well state assert during enabling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 09/18] drm/i915/gen9+: Remove redundant state check during power well toggling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 07/18] drm/i915/bxt, glk: Give a proper name to the power well struct phy field
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 06/18] drm/i915: Check for duplicated power well IDs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 05/18] drm/i915/hsw, bdw: Add an ID for the global display power well
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 03/18] drm/i915: Assign everywhere the always-on power well ID
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 04/18] drm/i915/gen2: Add an ID for the display pipes power well
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 02/18] drm/i915: Unify power well ID enums
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 01/18] drm/i915/chv: Add unique power well ID for the pipe A power well
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 00/23] drm/i915: Unify the HSW/BDW and GEN9+ power well code
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: ✓ Fi.CI.BAT: success for gen9+: Sanitize power well disabling during display uninit
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v10] vfio: ABI for mdev display dma-buf operation
  • From: Kirti Wankhede <kwankhede@xxxxxxxxxx>
• Re: [PATCH] Revert "drm/i915: Add option to support dynamic backlight via DPCD"
  • From: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v2 1/4] igt: Remove default from the engine list
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v2 1/4] igt: Remove default from the engine list
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• Re: [PATCH i-g-t v3 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t] tests/chamelium: Detect analogue bridges and handle EDID accordingly
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 0/1] tests/chamelium: Detect analogue bridges and handle EDID accordingly
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t] chamelium: Add support for VGA frame comparison testing
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 0/1] chamelium: Add support for VGA frame comparison testing
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drm/i915/fbdev: Always forward hotplug events
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH] drm/crc: Only open CRC on atomic drivers when the CRTC is active.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH 5/5] drm/hisilicon: Remove custom FB helper deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 4/5] drm/exynos: Remove custom FB helper deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 3/5] drm/fb-helper: Support deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 2/5] drm/i915: Protect against deferred fbdev setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 1/5] drm/i915/fbdev: Always forward hotplug events
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: TearFree true and Screen Rotation on Skylake
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• [PATCH 4/4] drm/<drivers>: Drop fbdev info flags
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 3/4] drm/qxl: Drop fbdev hwaccel flags
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 2/4] fbdev: Nuke FBINFO_MODULE
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 1/4] fbcon: Make fbcon a built-time depency for fbdev
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 0/4] Make fbcon a built-time depency for fbdev, take 2
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: TearFree true and Screen Rotation on Skylake
  • From: Mattias Nyman <mattias@xxxxxxx>
• [PATCH v4 09/14] drm: i915: remove dead code and pointless local lut storage
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 00/14] improve the fb_setcmap helper
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] drm/i915: Only free the oldest stale object before a fresh allocation
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Only free the oldest stale object before a fresh allocation
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Only free the oldest stale object before a fresh allocation
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915: Emit pipelined fence changes
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [RFC i-g-t 0/4] Redundant test pruning
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t 3/3] tests/gem_reset_stats: Enforce full chip reset mode before run
  • From: Arkadiusz Hiler <arkadiusz.hiler@xxxxxxxxx>
• Re: [PATCH] drm/crc: Handle opening and closing crc better
  • From: Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>
• Re: [PATCH 16/21] drm/i915/selftests: huge page tests
  • From: Matthew Auld <matthew.william.auld@xxxxxxxxx>
• Re: [PATCH i-g-t v2] tests/gem_mocs_settings: Fix LNCFCMOCS testing and extract the subtests
  • From: Arkadiusz Hiler <arkadiusz.hiler@xxxxxxxxx>
• Re: [PATCH 4/4] drm/i915: Only free the oldest stale context before allocating
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: warning for drm/i915: Disable all planes for load detection
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Disable all planes for load detection
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• Re: [PATCH] drm/i915: Setting pch_id for HSW/BDW in virtual environment
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [RFC i-g-t 0/4] Redundant test pruning
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] igt/debugfs_test: Skip dummy reads for crtc-n/crc/data
  • From: Abdiel Janulgue <abdiel.janulgue@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Martin Peres <martin.peres@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Martin Peres <martin.peres@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 4/5] tests/kms_atomic_transition: Do not clear in-fences after atomic commit.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 0/5] igt/kms: Make fence waiting explicit.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 5/5] igt/kms: Do not wait for fence completion during commit
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Disable per-engine reset for Broxton
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH i-g-t 2/5] lib/kms: Handle fence interaction correctly WRT TEST_ONLY.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 1/5] tests/kms_atomic_transition: Add test for plane completion ordering.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 3/5] tests/kms_atomic_transition: Only request fence on enabled pipes
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Skylake / (EE) modeset(0): present flip failed loop
  • From: Marc MERLIN <marc@xxxxxxxxxxx>
• Re: [PATCH i-g-t] igt/debugfs_test: Skip dummy reads for crtc-n/crc/data
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Can Intel BDW GPU work perfectly with iommu enabled?
  • From: "Dong, Chuanxiao" <chuanxiao.dong@xxxxxxxxx>
• Re: [PATCH 12/13] drm/exynos: Remove custom FB helper deferred setup
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915/cnl: Introduce initial Cannonlake Workarounds.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for x86/gpu: CNL uses the same GMS values as SKL
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Disable per-engine reset for Broxton
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Add force wake for gen10+.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915/cnl: WaDisableEnhancedSBEVertexCaching
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 4/4] drm/i915/cnl: Apply large line width optimization
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 2/4] drm/i915/cnl: Add WaDisableReplayBufferBankArbitrationOptimization
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 1/4] drm/i915/cnl: Introduce initial Cannonlake Workarounds.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] x86/gpu: CNL uses the same GMS values as SKL
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/cnl: Add force wake for gen10+.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] tools/null_state_gen: Add GEN10 golden context batch buffer creation
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for vfio: ABI for mdev display dma-buf operation (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v10] vfio: ABI for mdev display dma-buf operation
  • From: Tina Zhang <tina.zhang@xxxxxxxxx>
• [PATCH v10] drm/i915/gvt: Dma-buf support for GVT-g
  • From: Tina Zhang <tina.zhang@xxxxxxxxx>
• Re: [PATCH] intel/intel_chipset: Move IS_9XX below IS_GEN10.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH 4/5] drm/i915/gen9+: Don't remove secondary power well requests
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  • From: Jason Ekstrand <jason@xxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 3/4] lib/igt_chamelium: Add support for dumping chamelium frames to a png
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH i-g-t v3 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/16] improve the fb_setcmap helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] drm: Remove pending_read_domains and pending_write_domain
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 11/13] drm/i915: Protect against deferred fbdev setup
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH] drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: "Navare, Manasi D" <manasi.d.navare@xxxxxxxxx>
• Re: [PATCH v3 00/16] improve the fb_setcmap helper
  • From: Peter Rosin <peda@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Only free the oldest stale object before a fresh allocation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Only free the oldest stale object before a fresh allocation
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm: Remove pending_read_domains and pending_write_domain
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm: Remove pending_read_domains and pending_write_domain
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/21] drm/i915/selftests: huge page tests
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] drm/i915: Only free the oldest stale context before allocating
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915: Drop request retirement before reaping stale contexts
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Fixed16.16 wrapper cleanup & wm optimization (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915: Check new context against kernel_context after reporting an error
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "drm/i915: Add option to support dynamic backlight via DPCD"
  • From: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
• [PATCH 11/11] drm/i915/bxt: Enable IPC support
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 10/11] drm/i915/cnl: Extend WM workaround with IPC for CNL
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 09/11] drm/i915/glk: IPC linetime watermark workaround for GLK
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 08/11] drm/i915/gen10: Calculate and enable transition WM
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 07/11] drm/i915/skl+: Optimize WM calculation
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 06/11] drm/i915/skl+: unify cpp value in WM calculation
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 05/11] drm/i915/skl+: WM calculation don't require height
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 03/11] drm/i915: cleanup fixed-point wrappers naming
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 04/11] drm/i915: Addition wrapper for fixed16.16 operation
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 02/11] drm/i915: Always perform internal fixed16 division in 64 bits
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 01/11] drm/i915: take-out common clamping code of fixed16 wrappers
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 00/11] Fixed16.16 wrapper cleanup & wm optimization
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH 3/4] drm/i915: Drop request retirement before reaping stale contexts
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915: Move stale context reaping to common i915_gem_context_create
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] drm/i915: Only free the oldest stale context before allocating
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] drm/i915: Check new context against kernel_context after reporting an error
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915: Move stale context reaping to common i915_gem_context_create
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915: Move stale context reaping to common i915_gem_context_create
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/i915: Check new context against kernel_context after reporting an error
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Check new context against kernel_context after reporting an error
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC i-g-t 0/4] Redundant test pruning
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915: Move stale context reaping to common i915_gem_context_create
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] drm/i915: Check new context against kernel_context after reporting an error
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/selftests: Exercise independence of per-engine resets
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/selftests: Exercise independence of per-engine resets
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/13] drm/fb-helper: Support deferred setup
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH 3/4] drm/i915: Emit pipelined fence changes
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/13] drm/i915: Protect against deferred fbdev setup
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "drm/i915: Add option to support dynamic backlight via DPCD"
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Only skip updating execobject.offset after error
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Only skip updating execobject.offset after error
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 3/4] lib/igt_chamelium: Add support for dumping chamelium frames to a png
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/17] drm: create hdmi output property
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• Re: [PATCH v5 09/17] drm: create hdmi output property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v5 09/17] drm: create hdmi output property
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH v3 00/16] improve the fb_setcmap helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• ✓ Fi.CI.BAT: success for fbdev locking + deferred setup take 3 (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/fb-helper: Stop using mode_config.mutex for internals
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH v5 02/17] drm: add YCBCR 420 capability identifier
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• [PATCH v3 11/16] drm: i915: remove dead code and pointless local lut storage
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] BUG-REPORT: snd-hda: hacked-together EPROBE_DEFER support
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v3 00/16] improve the fb_setcmap helper
  • From: Peter Rosin <peda@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for fbdev locking + deferred setup take 3
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Revert "drm/i915: Add option to support dynamic backlight via DPCD"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 08/13] drm/fb-helper: Stop using mode_config.mutex for internals
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH] drm/i915: Disable per-engine reset for Broxton
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 02/17] drm: add YCBCR 420 capability identifier
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/13] drm/fb-helper: Stop using mode_config.mutex for internals
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/17] drm: create hdmi output property
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 10/13] drm/fb-helper: Support deferred setup
  • From: Liviu Dudau <liviu@xxxxxxxxxxx>
• Re: [PATCH] BUG-REPORT: snd-hda: hacked-together EPROBE_DEFER support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 13/13] drm/hisilicon: Remove custom FB helper deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 12/13] drm/exynos: Remove custom FB helper deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 11/13] drm/i915: Protect against deferred fbdev setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 09/13] drm/fb-helper: Split dpms handling into legacy and atomic paths
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 10/13] drm/fb-helper: Support deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 08/13] drm/fb-helper: Stop using mode_config.mutex for internals
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 07/13] drm/fb-helper: Push locking into restore_fbdev_mode_atomic|legacy
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH 13/13] drm/atomic-helper: Realign function parameters
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH 06/13] drm/fb-helper: Push locking into pan_display_atomic|legacy
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 05/13] drm/fb-helper: Drop locking from the vsync wait ioctl code
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 04/13] drm/fb-helper: Push locking in fb_is_bound
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 03/13] drm/fb-helper: Add top-level lock
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 02/13] drm/i915: Drop FBDEV #ifdev in mst code
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 01/13] drm/fb-helper: Push down modeset lock into FB helpers
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH 00/13] fbdev locking + deferred setup take 3
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH] BUG-REPORT: snd-hda: hacked-together EPROBE_DEFER support
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH] Revert "drm/i915: Add option to support dynamic backlight via DPCD"
  • From: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm/i915: Consolidate get_fence with pin_fence
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v2] tests/gem_mocs_settings: Fix LNCFCMOCS testing and extract the subtests
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for HDMI YCBCR output handling in DRM layer
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH v5 13/17] drm/i915: prepare scaler for YCBCR420 modeset
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 14/17] drm/i915: prepare pipe for YCBCR output
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 12/17] drm/i915: add compute-config for YCBCR outputs
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 17/17] drm/i915/glk: set HDMI 2.0 identifier
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 09/17] drm: create hdmi output property
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 15/17] drm/i915: prepare csc unit for YCBCR HDMI output
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 16/17] drm/i915: set colorspace for ycbcr outputs
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 07/17] drm/edid: parse YCBCR 420 videomodes from EDID
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 11/17] drm: add helper functions for YCBCR output handling
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 06/17] drm/edid: rename macro for CEA extended-tag
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 05/17] drm/edid: parse sink information before CEA blocks
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 10/17] drm: set output colorspace in AVI infoframe
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 08/17] drm/edid: parse ycbcr 420 deep color information
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 04/17] drm: add helper to validate ycbcr420 modes
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 03/17] drm/edid: Complete CEA modedb(VIC 1-107)
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 02/17] drm: add YCBCR 420 capability identifier
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 01/17] drm: add HDMI 2.0 VIC support for AVI info-frames
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH v5 00/17] HDMI YCBCR output handling in DRM layer
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH i-g-t v2 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v2 3/4] lib/igt_chamelium: Add support for dumping chamelium frames to a png
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v2 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v2 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v4 3/3] Make igtrc configuration common, with configurable suspend/resume delay
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v4 2/3] chamelium: Remove init reset duplicate in favor of per-test reset
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v4 1/3] tests/chamelium: Update connector state without reprobe when possible
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] igt/debugfs_test: Skip dummy reads for crtc-n/crc/data
  • From: Arkadiusz Hiler <arkadiusz.hiler@xxxxxxxxx>
• [PATCH i-g-t] configure.ac: Make AMDGPU depend on libdrm >= 2.4.76
  • From: Arkadiusz Hiler <arkadiusz.hiler@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [01/10] drm/i915: Report execlists irq bit in debugfs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH 03/10] drm/i915: Serialize per-engine resets against new requests
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] drm/i915: Reset context image on engines after triggering the reset
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 08/10] drm/i915: Wake up waiters after setting the WEDGED bit
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 01/10] drm/i915: Report execlists irq bit in debugfs
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] drm/i915: Assert that machine is wedged for nop_submit_request
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] drm/i915: Clear engine irq posted following a reset
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 04/10] drm/i915: Flush the execlist ports if idle
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 05/10] drm/i915: Check execlist/ring status during hangcheck
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 06/10] drm/i915: Check the execlist queue for pending requests before declaring idle
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 07/10] drm/i915: Clear execlist port[] before updating seqno on wedging
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH] drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915: Pin fence for iomap
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915: Pin fence for iomap
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Fix use-after-free of context during free_contexts
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] video/hdmi: Allow "empty" HDMI infoframes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: TearFree true and Screen Rotation on Skylake
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915: Pin fence for iomap
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915: Pin fence for iomap
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• TearFree true and Screen Rotation on Skylake
  • From: Mattias Nyman <mattias@xxxxxxx>
• [PATCH] drm/i915: Unpin vma iomapping when fbdev is destroyed
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• Re: [PATCH 1/2] video/hdmi: Allow "empty" HDMI infoframes
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm: i915: sysfs: constify attribute_group structures.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm: i915: sysfs: constify attribute_group structures.
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• Re: [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] drm/i915: Fix an error hanfling path in 'i915_gem_do_execbuffer'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for vfio: ABI for mdev display dma-buf operation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] vfio: ABI for mdev display dma-buf operation
  • From: "Zhang, Tina" <tina.zhang@xxxxxxxxx>
• [PATCH v1] vfio: ABI for mdev display dma-buf operation
  • From: Tina Zhang <tina.zhang@xxxxxxxxx>
• Re: [PATCH v9 5/7] vfio: Define vfio based dma-buf operations
  • From: "Zhang, Tina" <tina.zhang@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] video/hdmi: Allow "empty" HDMI infoframes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/hdmi: Allow HDMI infoframe without VIC or S3D
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 1/2] video/hdmi: Allow "empty" HDMI infoframes
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [Regression report] Weekly regression report WW26
  • From: elizabethx.de.la.torre.mena@xxxxxxxxxxxxxxx
• [Bug Report] Weekly progress report WW26
  • From: "De La Torre Mena, ElizabethX" <elizabethx.de.la.torre.mena@xxxxxxxxx>
• Re: [PATCH] drm/fb-helper: Remove drm_mode_config_fb.
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• ✓ Fi.CI.BAT: success for Handle unsupported configuration with IF-ID (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] drm/fb-helper: Restore first connection behaviour on deferred setup
  • From: Daniel Vetter <daniel@xxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: Report execlists irq bit in debugfs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• [PATCH 1/3] drm/i915: Report execlists irq bit in debugfs
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] drm/i915: Serialize per-engine resets against new requests
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] drm/i915: Reset context image on engines after triggering the reset
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• Re: [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: warning for drm/edid: rename macro for CEA extended-tag (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/edid: rename macro for CEA extended-tag (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• Re: [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• [PATCH v3] drm/edid: rename macro for CEA extended-tag
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• Re: [PATCH i-g-t v3 3/3] Make igtrc configuration common, with configurable suspend/resume delay
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for huge gtt pages (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/21] drm/i915/selftests: huge page tests
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Clear execlist port[] before updating seqno on wedging
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/edid: rename macro for CEA extended-tag
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Clear engine irq posted following a reset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drm/edid: rename macro for CEA extended-tag
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• [PATCH 21/21] drm/i915: enable platform support for 1G pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 20/21] drm/i915: enable platform support for 2M pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 18/21] drm/i915: disable platform support for vGPU huge gtt pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 19/21] drm/i915: enable platform support for 64K pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 17/21] drm/i915/selftests: mix huge pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 16/21] drm/i915/selftests: huge page tests
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 15/21] drm/i915/debugfs: include some gtt page size metrics
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 14/21] drm/i915: accurate page size tracking for the ppgtt
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 13/21] drm/i915: support 64K pages for the 48b PPGTT
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 12/21] drm/i915: support 2M pages for the 48b PPGTT
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 11/21] drm/i915: support 1G pages for the 48b PPGTT
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 10/21] drm/i915: disable GTT cache for 2M/1G pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 09/21] drm/i915: enable IPS bit for 64K pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 08/21] drm/i915: align 64K objects to 2M
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 07/21] drm/i915: align the vma start to the largest gtt page size
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 06/21] drm/i915: introduce vm set_pages/clear_pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 05/21] drm/i915: introduce page_size members
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 04/21] drm/i915: introduce page_size_mask to dev_info
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 03/21] drm/i915/gemfs: enable THP
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 02/21] drm/i915: introduce simple gemfs
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 01/21] mm/shmem: introduce shmem_file_setup_with_mnt
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH 00/21] huge gtt pages
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• [PATCH] drm/i915: Clear execlist port[] before updating seqno on wedging
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Clear engine irq posted following a reset
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: Check execlist/ring status during hangcheck
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] drm/i915: Wake up waiters after setting the WEDGED bit
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] drm/i915: Check execlist/ring status during hangcheck
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] drm/i915: Check the execlist queue for pending requests before declaring idle
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/edid: rename macro for CEA extended-tag
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/edid: rename macro for CEA extended-tag
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict harder
  • From: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
• [PATCH] drm/edid: rename macro for CEA extended-tag
  • From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
• ✗ Fi.CI.BAT: warning for drm/fb-helper: Remove drm_mode_config_fb.
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 4/4] chamelium: Dump obtained and reference frames to png on crc error
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 3/4] lib/igt_chamelium: Add support for dumping chamelium frames to a png
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 2/4] tests/ chamelium: Remove the frame dump tests
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t 1/4] chamelium: Calculate CRC from framebuffer instead of hardcoding it
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 3/3] Make igtrc configuration common, with configurable suspend/resume delay
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 2/3] chamelium: Remove init reset duplicate in favor of per-test reset
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH i-g-t v3 1/3] tests/chamelium: Update connector state without reprobe when possible
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxxxxxx>
• [PATCH] drm/fb-helper: Remove drm_mode_config_fb.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/i915: Report execlists irq bit in debugfs
  • From: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: Refactor testing obj->mm.pages
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 01/15] drm: add HDMI 2.0 VIC support for AVI info-frames
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH 1/2] drm/vmwgfx: Drop drm_vblank_cleanup
  • From: Sinclair Yeh <syeh@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915: Pin fence for iomap
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH 3/3] drm/i915: Trim struct_mutex hold duration for i915_gem_free_objects
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] drm/i915: Move dev_priv->mm.[un]bound_list to its own lock
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] drm/i915: Refactor testing obj->mm.pages
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH i-g-t] igt/debugfs_test: Skip dummy reads for crtc-n/crc/data
  • From: Abdiel Janulgue <abdiel.janulgue@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915: Emit pipelined fence changes
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915: Consolidate get_fence with pin_fence
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] drm/i915: Make fence->pin_count atomic to allow unlocked unpinning
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] drm/i915: Pin fence for iomap
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/i915: Hold RPM wakelock while initializing OA buffer
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 01/15] drm: add HDMI 2.0 VIC support for AVI info-frames
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush the execlist ports if idle
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush the execlist ports if idle
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 01/15] drm: add HDMI 2.0 VIC support for AVI info-frames
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• [PATCH] drm/i915: Flush the execlist ports if idle
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Report execlists irq bit in debugfs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/fb-helper: Restore first connection behaviour on deferred setup
  • From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
• Re: [PATCH] drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH 1/2] drm/i915: Report execlists irq bit in debugfs
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915: Reset context image on engines after triggering the reset
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] drm/atomic: initial support for asynchronous plane update
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Updated drm-intel-testing
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• Re: [PATCH IGT v2 5/6] tests/kms_frontbuffer_tracking: Fix multidraw subtest
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH IGT v2 4/6] tests/kms_frontbuffer_tracking: Refactor to use IGT PSR library functions
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] intel/intel_chipset: Move IS_9XX below IS_GEN10.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH IGT v2 2/6] lib: Add PSR utility functions to igt library.
  • From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
• Re: [PATCH] drm/i915: Fix use-after-free of context during free_contexts
  • From: Matthew Auld <matthew.william.auld@xxxxxxxxx>
• Re: [PATCH IGT v2 2/6] lib: Add PSR utility functions to igt library.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915: Fix use-after-free of context during free_contexts
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH IGT v2 4/6] tests/kms_frontbuffer_tracking: Refactor to use IGT PSR library functions
  • From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
• [PATCH i-g-t 2/2] list-workarounds/cfl: Add Coffee Lake to the list of valid platorms
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t 1/2] list-workarounds/cnl: Add Cannonlake to the list of valid platorms
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix use-after-free of context during free_contexts
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] drm/i915/psr: Account for sink CRC raciness on some panels
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH IGT v2 6/6] tests/kms_fbcon_fbt: Refactor to use IGT PSR library functions
  • From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
• Re: [PATCH IGT v2 4/6] tests/kms_frontbuffer_tracking: Refactor to use IGT PSR library functions
  • From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
• [PATCH i-g-t] lib/i915_pciids.h: Organize cnl/cfl ids.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH IGT v2 1/6] tests/kms_psr_sink_crc: Change assert_or_manual() to a macro
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v2 2/4] drm/i915/psr: Clean-up intel_enable_source_psr1()
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Kernel PSR Fix-ups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH IGT v2 3/6] tests/kms_psr_sink_crc: Refactor to use new PSR library primitives
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 2/6] lib: Add PSR utility functions to igt library.
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 6/6] tests/kms_fbcon_fbt: Refactor to use IGT PSR library functions
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 5/6] tests/kms_frontbuffer_tracking: Fix multidraw subtest
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 4/6] tests/kms_frontbuffer_tracking: Refactor to use IGT PSR library functions
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 1/6] tests/kms_psr_sink_crc: Change assert_or_manual() to a macro
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH IGT v2 0/6] IGT PSR Fix-ups
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] drm/i915/psr: Account for sink CRC raciness on some panels
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] drm/i915/edp: Be less aggressive about changing link config on eDP
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Kernel PSR Fix-ups
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] drm/i915/edp: Allow alternate fixed mode for eDP if available.
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] drm/i915/psr: Clean-up intel_enable_source_psr1()
  • From: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm: add asynchrounous plane update (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] drm/fb-helper: Restore first connection behaviour on deferred setup
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH v4 6/6] drm/vc4: update cursors asynchronously through atomic
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 5/6] drm/msm: remove mdp5_cursor_plane_funcs
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 4/6] drm/msm: update cursors asynchronously through atomic
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 3/6] drm/i915: remove intel_cursor_plane_funcs
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 2/6] drm/i915: update cursors asynchronously through atomic
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 1/6] drm/atomic: initial support for asynchronous plane update
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v4 0/6] drm: add asynchrounous plane update
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/guc: Prevent ggtt->invalidate assert during GuC reload
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/guc: Prevent ggtt->invalidate assert during GuC reload
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for x86/io: Rely on asm-generic/io.h
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] x86/io: Remove xlate_dev_kmem_ptr() duplication
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/5] x86/io: Define IO accessors by preprocessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/5] x86/io: Make readq() / writeq() API consistent
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/5] x86/io: Rely on asm-generic/io.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/5] x86/io: Remove mem*io() duplications
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/5] x86/io: Include asm-generic/io.h to architectural code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [REGRESSION 4.12] i915 Oops at intel_fbdev_invalidate()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] drm/fb-helper: Restore first connection behaviour on deferred setup
  • From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Manasi Navare <manasi.d.navare@xxxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [REGRESSION 4.12] i915 Oops at intel_fbdev_invalidate()
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [REGRESSION 4.12] i915 Oops at intel_fbdev_invalidate()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [Mesa-dev] [PATCH 2/4] intel: Add Cannonlake PCI IDs for Y-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH i-g-t 3/5] lib/cnl: Add Cannonlake PCI IDs for Y-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  • From: "Vivi, Rodrigo" <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t] tests/kms_flip: Make panning tests actually pan all the time
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 11/15] drm/i915: prepare scaler for YCBCR420 modeset
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• [PATCH 2/3] drm/i915: Fix race between pipe update and vblank irq
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 1/3] drm/vblank: Introduce drm_crtc_vblank_get_accurate()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• [PATCH 3/3] drm/i915: Use drm_crtc_vblank_get_accurate() in intel_atomic_wait_for_vblanks()
  • From: ville.syrjala@xxxxxxxxxxxxxxx
• Re: [RESEND-CI v4 11/15] drm/i915: prepare scaler for YCBCR420 modeset
  • From: Ander Conselvan De Oliveira <conselvan2@xxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 1/2] drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/i915: Hold RPM wakelock while initializing OA buffer
  • From: Lionel Landwerlin <lionel.g.landwerlin@xxxxxxxxx>
• Re: [PATCH 2/2] drm/atomic: Wait indefinitely and interruptibly for hw_done.
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [RESEND-CI v4 15/15] drm/i915/glk: set HDMI 2.0 identifier
  • From: Ander Conselvan De Oliveira <conselvan2@xxxxxxxxx>
• Re: [PATCH 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drm/atomic: Refactor drm_atomic_state_realloc_connectors()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• ✗ Fi.CI.BAT: failure for Handle unsupported configuration with IF-ID (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH] drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 4/5] drm/i915/gen9+: Don't remove secondary power well requests
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 15/15] drm/i915/glk: set HDMI 2.0 identifier
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH i-g-t] tests/gem_mocs_settings: Fix LNCFCMOCS testing and extract the subtests
  • From: "Kalamarz, Lukasz" <lukasz.kalamarz@xxxxxxxxx>
• Re: [RESEND-CI v4 04/15] drm/edid: parse YCBCR 420 videomodes from EDID
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 15/15] drm/i915/glk: set HDMI 2.0 identifier
  • From: Ander Conselvan De Oliveira <conselvan2@xxxxxxxxx>
• [PATCH v3 2/2] drm/i915/skl+: Scaling not supported in IF-ID Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH v3 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH v3 0/2] Handle unsupported configuration with IF-ID
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• Re: [RESEND-CI v4 06/15] drm/edid: parse sink information before CEA blocks
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH 01/17] drm/i915: Clear pipestat consistently
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 11/15] drm/i915: prepare scaler for YCBCR420 modeset
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 04/15] drm/edid: parse YCBCR 420 videomodes from EDID
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 01/15] drm: add HDMI 2.0 VIC support for AVI info-frames
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 06/15] drm/edid: parse sink information before CEA blocks
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/17] drm/i915: Clear pipestat consistently
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] GVT-g fixes for drm-intel-next-fixes
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 3/4] drm/i915: Make i915_gem_object_phys_attach() use obj->mm.lock more appropriately
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 11/15] drm/i915: prepare scaler for YCBCR420 modeset
  • From: Ander Conselvan De Oliveira <conselvan2@xxxxxxxxx>
• Re: [PATCH 01/17] drm/i915: Clear pipestat consistently
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [RESEND-CI v4 13/15] drm/i915: prepare csc unit for YCBCR HDMI output
  • From: Ander Conselvan De Oliveira <conselvan2@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict harder
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] drm/atomic: initial support for asynchronous plane update
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 1/6] drm/atomic: initial support for asynchronous plane update
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 2/6] drm/i915: update cursors asynchronously through atomic
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [RESEND-CI v4 13/15] drm/i915: prepare csc unit for YCBCR HDMI output
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 11/15] drm/i915: prepare scaler for YCBCR420 modeset
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH v5 7/7] drm: create hdmi output property
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 06/15] drm/edid: parse sink information before CEA blocks
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 05/15] drm/edid: parse ycbcr 420 deep color information
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 04/15] drm/edid: parse YCBCR 420 videomodes from EDID
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [RESEND-CI v4 03/15] drm/edid: Complete CEA modedb(VIC 1-107)
  • From: "Sharma, Shashank" <shashank.sharma@xxxxxxxxx>
• Re: [PATCH] drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915: Setting pch_id for HSW/BDW in virtual environment
  • From: "Zhang, Xiong Y" <xiong.y.zhang@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  • From: Manasi Navare <manasi.d.navare@xxxxxxxxx>
• Re: [PATCH 10/13] drm/fb-helper: Support deferred setup (fwd)
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 1/7] dma-buf/dma-fence: Extract __dma_fence_is_later()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH 2/4] intel: Add Cannonlake PCI IDs for Y-skus.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH 1/4] intel: Add Cannonlake PCI IDs for U-skus.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/7] dma-buf/dma-fence: Extract __dma_fence_is_later() (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t 3/5] lib/cnl: Add Cannonlake PCI IDs for Y-skus.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH i-g-t 2/5] lib/cnl: Add Cannonlake PCI IDs for U-skus.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• [PATCH 3/4] intel/gen10: Add missed gen10 stuff
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 2/4] intel: Add Cannonlake PCI IDs for Y-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 4/4] intel: add GEN10 to IS_9XX.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 1/4] intel: Add Cannonlake PCI IDs for U-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH i-g-t 5/5] lib/intel_batchbuffer: Add Gen10 support for render_copy and gpgpu_fillfunc.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t 4/5] lib/instdone: Add Gen10 support.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t 1/5] lib/cnl: Introduce Cannonlake platform defition.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t 2/5] lib/cnl: Add Cannonlake PCI IDs for U-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH i-g-t 3/5] lib/cnl: Add Cannonlake PCI IDs for Y-skus.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH v3] dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] dma-buf/sw-sync: Fix locking around sync_timeline lists
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• [PATCH v3] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Manasi Navare <manasi.d.navare@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Manasi Navare <manasi.d.navare@xxxxxxxxx>
• [PATCH] dri2: Sync i965_pci_ids.h from Mesa.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dma-buf/dma-fence: Extract __dma_fence_is_later()
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH] drm/i915/cfl: Fix Workarounds.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 4/5] drm/i915/gen9+: Don't remove secondary power well requests
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/cfl: Fix Workarounds.
  • From: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@xxxxxxxxx>
• Re: [PATCH 4/4] drm/i915: Add support for CCS modifiers
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915: Add format modifiers for Intel
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm: Create a format/modifier blob
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] drm/i915/skl: Don't disable misc IO power well during display uninit
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 1/5] drm/i915/gen9+: Add 10 us delay after power well 1/AUX IO pw disabling
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 7/7] dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH 3/5] drm/i915/bxt, glk: Fix assert on conditions for DC9 enabling
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 5/5] drm/i915/cnl: Fix comment about AUX IO power well enable/disable
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v4 5/5] drm/i915: Solve the GPU reset vs. modeset deadlocks with an rw_semaphore
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH libdrm 3/3] intel: PCI Ids for U SKU in CFL
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [RESEND i-g-t 3/3] lib/cfl: Add PCI Ids for U SKU in CFl
  • From: "Vivi, Rodrigo" <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH i-g-t] lib/cfl: Introduce Coffeelake platform definition.
  • From: "Vivi, Rodrigo" <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH i-g-t] Add support for subtest-specific documentation
  • From: Leo <sunpeng.li@xxxxxxx>
• Re: [PATCH v2 2/2] drm/i915/skl+: Scaling not supported in IF-ID Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t] lib/cfl: Introduce Coffeelake platform definition.
  • From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
• Re: [PATCH 6/7] dma-buf/sw-sync: Fix locking around sync_timeline lists
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] dma-buf/sw-sync: Fix locking around sync_timeline lists
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH i-g-t] lib/cfl: Introduce Coffeelake platform definition.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.BAT: warning for Handle unsupported configuration with IF-ID (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Skip i915_swizzle_info in platforms without GPU side swizzle
  • From: Michel Thierry <michel.thierry@xxxxxxxxx>
• [PATCH v2 2/2] drm/i915/skl+: Scaling not supported in IF-ID Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH v2 1/2] drm/i915/skl+: Check for supported plane configuration in Interlace mode
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• [PATCH v2 0/2] Handle unsupported configuration with IF-ID
  • From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for gen9+: Sanitize power well disabling during display uninit
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Setting pch_id for HSW/BDW in virtual environment
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/20] drm/i915: introduce page_size members
  • From: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
• Re: ✓ Fi.CI.BAT: success for drm/i915: Avoid undefined behaviour of "u32 >> 32" (rev2)
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>