Re: [PATCH v2] drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the review comments. Please find my responses below:

On Thu, Jun 29, 2017 at 11:24:48PM +0300, Ville Syrjälä wrote:
> On Wed, Jun 28, 2017 at 05:14:31PM -0700, Manasi Navare wrote:
> > This patch fixes the DP AUX CH timeouts observed during CI IGT
> > tests thus fixing the CI failures. This is done by adding a
> > quirk for a particular PCI device that requires the panel power
> > cycle delay (T12) to be 300msecs more than the minimum value
> > specified in the eDP spec. So a quirk is implemented for that
> > specific PCI device.
> > 
> > v2:
> > * Change the function and variable names to from PPS_T12_
> > to _T12 since it is a T12 delay (Clint)
> > 
> > Fixes: FDO #101144 #101515 #101154 #101167
> > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Cinton Taylor <clinton.a.taylor@xxxxxxxxx>
> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/i915_drv.h      |  1 +
> >  drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
> >  drivers/gpu/drm/i915/intel_dp.c      | 12 ++++++++++++
> >  3 files changed, 25 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 427d10c..4327c8a 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1168,6 +1168,7 @@ enum intel_sbi_destination {
> >  #define QUIRK_INVERT_BRIGHTNESS (1<<2)
> >  #define QUIRK_BACKLIGHT_PRESENT (1<<3)
> >  #define QUIRK_PIN_SWIZZLED_PAGES (1<<5)
> > +#define QUIRK_INCREASE_T12_DELAY (1<<6)
> >  
> >  struct intel_fbdev;
> >  struct intel_fbc_work;
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 4e03ca6..37beb62 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -14765,6 +14765,15 @@ static void quirk_backlight_present(struct drm_device *dev)
> >  	DRM_INFO("applying backlight present quirk\n");
> >  }
> >  
> > +/* Some systems require 300ms extra PPS T12 delay to be added to VBT value */
> 
> The comment disagrees with the code. Code uses 800ms explicitly instead of
> +300 ms.
> 

Agree, I will change it to 800ms in the comment.


> > +static void quirk_increase_t12_delay(struct drm_device *dev)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(dev);
> > +
> > +	dev_priv->quirks |= QUIRK_INCREASE_T12_DELAY;
> > +	DRM_INFO("Applying T12 delay quirk\n");
> > +}
> > +
> >  struct intel_quirk {
> >  	int device;
> >  	int subsystem_vendor;
> > @@ -14848,6 +14857,9 @@ static struct intel_quirk intel_quirks[] = {
> >  
> >  	/* Dell Chromebook 11 (2015 version) */
> >  	{ 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
> > +
> > +	/* Toshiba Satellite P50-C-18C */
> > +	{ 0x191B, 0x1179, 0xF840, quirk_increase_t12_delay },
> 
> Hmm. Looks like the 1179:f840 combo is present on a lot of Toshiba
> models. But we do have the device ID here too so the quirk shouldn't
> go totally overboard.
>

Yea this quirk should then get applied only to this device.
Do you have any other Toshiba laptop with 1179:f840 combo
to make sure it doesnt get applied on that?

 
> >  };
> >  
> >  static void intel_init_quirks(struct drm_device *dev)
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 67bc8a7a..db6953e 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -49,6 +49,9 @@
> >  #define INTEL_DP_RESOLUTION_STANDARD	(2 << INTEL_DP_RESOLUTION_SHIFT_MASK)
> >  #define INTEL_DP_RESOLUTION_FAILSAFE	(3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
> >  
> > +/* PPS T12 Delay Quirk value for eDP */
> > +#define T11_T12_800MS		8000
> 
> The define seems pointless. Just use the raw number in the code. Also
> writing it as 800*10 would be more consistent with the rest of the code.
> 

Sounds good, will use 800*10

> > +
> >  struct dp_link_dpll {
> >  	int clock;
> >  	struct dpll dpll;
> > @@ -5230,6 +5233,15 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
> >  	intel_pps_dump_state("cur", &cur);
> >  
> >  	vbt = dev_priv->vbt.edp.pps;
> > +	/* Apply the QUIRK_INCREASE_T12_DELAY quirk for a specific
> > +	 * type of PCI device to avoid  DP AUX CH Timeouts.
> 
> That comment doesn't seem very helpful. I would put in something like:
> 
> "On Toshiba <whatever> the VBT t12 delay of 500ms appears to be too
>  short. Occasionally the panel just fails to power back on. Increasing
>  the delay to 800ms seems sufficient to avoid the problem."
>

Ok will do

Manasi
 
> > +	 */
> > +	if (dev_priv->quirks & QUIRK_INCREASE_T12_DELAY) {
> > +
> > +		vbt.t11_t12 = max_t(u16, vbt.t11_t12, T11_T12_800MS);
> > +		DRM_DEBUG_KMS("Increasing T12 panel delay as per the quirk to %d\n",
> > +			      vbt.t11_t12);
> > +	}
> >  	/* T11_T12 delay is special and actually in units of 100ms, but zero
> >  	 * based in the hw (so we need to add 100 ms). But the sw vbt
> >  	 * table multiplies it with 1000 to make it in units of 100usec,
> > -- 
> > 2.1.4
> 
> -- 
> Ville Syrjälä
> Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux