Linux Intel Graphics

• Thread Index

• ✓ i915.CI.Full: success for drm/i915/dmc_wl: Track pipe interrupt registers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dp: 128b/132b uncompressed SST (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Track pipe interrupt registers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/dmc_wl: Track pipe interrupt registers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/4] drm/msm/dp: Add support for LTTPR handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] drm/i915/dmc_wl: Track pipe interrupt registers
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 2/3] drm/i915/display: Wrap IRQ-specific uncore functions
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 0/3] drm/i915/dmc_wl: Track pipe interrupt registers
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 1/3] drm/i915/display: Use display MMIO functions in intel_display_irq.c
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH v3 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 06/16] drm/i915/mst: split out a helper for figuring out the TU
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 05/16] drm/i915/mst: remove crtc_state->pbn
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 00/16] drm/i915/dp: 128b/132b uncompressed SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• RE: [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] drm/i915/dsb: Allow DSB to perform commits when VRR is enabled
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 17/18] drm/i915/dsb: Add support for triggering VRR push with DSB
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 16/18] drm/i915/vrr: Plumb the DSB into intel_vrr_send_push()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 15/18] drm/i915/vrr: Add extra vblank delay to estimates
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 14/18] drm/i915/vrr: Fix vmin/vmax/flipline on TGL when using vblank delay
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 13/18] drm/i915/vrr: Drop the extra vmin adjustment for ADL+
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 12/18] drm/i915/vrr: Introduce intel_vrr_vblank_delay()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 11/18] drm/i915: Extract intel_crtc_active_timings()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 10/18] drm/i915: Consolidate intel_pre_commit_crtc_state()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 09/18] drm/i915: Extract intel_mode_vblank_delay()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 08/18] drm/i915: Include the scanline offset in the state dump
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 07/18] drm/i915/vrr: Improve VRR state dump
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 06/18] drm/i915: Include the vblank delay in the state dump
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 05/18] drm/i915: Move framestart/etc. state dump to a better spot
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 04/18] drm/i915: Introduce intel_vrr_{vmin,vmax}_vtotal()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 03/18] drm/i915: Fix include order
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 02/18] drm/i915: Check vblank delay validity
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 01/18] drm/i915: Extract intel_crtc_vblank_delay()
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/ci: uprev IGT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ✗ i915.CI.BAT: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/ddi: Optimize mtl_port_buf_ctl_program
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/dp: Use intel_display instead of drm_i915_private
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp: Return early if dsc is required but not supported
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: Guarantee a minimum HBlank time (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: ✗ Fi.CI.BUILD: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: Guarantee a minimum HBlank time (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for Clean and Optimise mtl_ddi_prepare_link_retrain
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v6] drm/i915/dp: Guarantee a minimum HBlank time
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH v2] drm/ci: uprev IGT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v1 0/1] drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• [PATCH v1 1/1] drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• RE: [PATCH] drm/i915/dp: Return early if dsc is required but not supported
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• RE: [PATCHv4] drm/i915/dp: Guarantee a minimum HBlank time
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PATCH 2/2] drm/i915/ddi: Optimize mtl_port_buf_ctl_program
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 1/2] drm/i915/dp: Use intel_display instead of drm_i915_private
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• [PATCH 0/2] Clean and Optimise mtl_ddi_prepare_link_retrain
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/dp: Return early if dsc is required but not supported
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCHv4] drm/i915/dp: Guarantee a minimum HBlank time
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• [PATCH] drm/i915/dp: Return early if dsc is required but not supported
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PULL] drm-xe-fixes
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• [PULL] drm-xe-fixes
  • From: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• RE: ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: "Ravali, JupallyX" <jupallyx.ravali@xxxxxxxxx>
• Re: [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/selftest: Change throttle criteria for rps
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/dp: 128b/132b uncompressed SST (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/selftest: Change throttle criteria for rps
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• RE: [PATCH v4 03/11] mtd: intel-dg: implement region enumeration
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v4 03/11] mtd: intel-dg: implement region enumeration
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• ✓ i915.CI.Full: success for PSR DSB support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ i915.CI.BAT: success for PSR DSB support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for PSR DSB support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH v2 9/9] drm/i915/psr: Allow DSB usage when PSR is enabled
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 8/9] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 7/9] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 6/9] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 5/9] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 4/9] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 3/9] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 2/9] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 1/9] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 0/9] PSR DSB support
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• RE: [PATCH] drm/xe/display: Re-use display vmas when possible
  • From: "Manna, Animesh" <animesh.manna@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for mtd: add driver for Intel discrete graphics (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for mtd: add driver for Intel discrete graphics (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for mtd: add driver for Intel discrete graphics (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 11/11] drm/xe/nvm: add support for access mode
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 10/11] drm/xe/nvm: add on-die non-volatile memory device
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 09/11] drm/i915/nvm: add support for access mode
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 08/11] drm/i915/nvm: add nvm device for discrete graphics
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 07/11] mtd: intel-dg: wake card on operations
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 05/11] mtd: intel-dg: register with mtd
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 04/11] mtd: intel-dg: implement access functions
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 03/11] mtd: intel-dg: implement region enumeration
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 01/11] mtd: core: always create master device
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• [PATCH v4 00/11] mtd: add driver for Intel discrete graphics
  • From: Alexander Usyskin <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH 4/4] drm/i915/display: convert global state to struct intel_display
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/pmdemand: cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] drm/i915/pmdemand: convert to struct intel_display
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 2/4] drm/i915/pmdemand: make struct intel_pmdemand_state opaque
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 1/4] drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/pmdemand: cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/pmdemand: cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 4/4] drm/i915/display: convert global state to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 3/4] drm/i915/pmdemand: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 2/4] drm/i915/pmdemand: make struct intel_pmdemand_state opaque
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/4] drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 0/4] drm/i915/pmdemand: cleanups
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 05/16] drm/i915/mst: remove crtc_state->pbn
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v2 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 1/4] drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 05/10] drm/i915/psr: Ensure SFF/CFF bits are not written at their sample point
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH] drm/i915: Remove deadcode
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Prevent uninitialized pointer reads
  • From: Krzysztof Karas <krzysztof.karas@xxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Prevent uninitialized pointer reads
  • From: Krzysztof Karas <krzysztof.karas@xxxxxxxxx>
• Re: [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [CI v3 6/6] drm/i915/ddi: only call shutdown hooks for valid encoders
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 5/6] drm/i915/display: add intel_encoder_is_hdmi()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 3/6] drm/i915/hdmi: add error handling in g4x_hdmi_init()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp, hdmi}_connector() return type
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [CI v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH 4/4] drm/i915/dmc_wl: Allow enable_dmc_wl=3 to mean "always locked"
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• RE: [PATCH 3/4] drm/i915/dmc_wl: Allow enable_dmc_wl=2 to mean "match any register"
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• RE: [PATCH 2/4] drm/i915/dmc_wl: Show description string for enable_dmc_wl
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• RE: [PATCH 1/4] drm/i915/dmc_wl: Use enum values for enable_dmc_wl
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/i915: Remove deadcode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: Remove deadcode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for series starting with [1/3] drm/i915: Remove deadcode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: Remove deadcode (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for series starting with [1/3] drm/i915: Remove deadcode (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915: Remove deadcode (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/i915: Remove unused intel_ring_cacheline_align
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/i915: Remove unused intel_huc_suspend
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/3] drm/i915: Remove deadcode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Prevent uninitialized pointer reads
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/3] drm/i915: Remove deadcode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915: Remove deadcode
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Prevent uninitialized pointer reads
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Remove deadcode
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• [PATCH 3/3] drm/i915: Remove unused intel_ring_cacheline_align
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• [PATCH 1/3] drm/i915: Remove deadcode
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• [PATCH 2/3] drm/i915: Remove unused intel_huc_suspend
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads
  • From: apoorva.singh@xxxxxxxxx
• [PATCH] drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration
  • From: apoorva.singh@xxxxxxxxx
• ✗ i915.CI.Full: failure for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: Add WA_14018221282 (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Add WA_14018221282
  • From: Nemesa Garg <nemesa.garg@xxxxxxxxx>
• RE: ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: "Ravali, JupallyX" <jupallyx.ravali@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] drm/i915/display: Add MTL subplatforms definition
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v4 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH] drm/i915: Add debug print about hw config table size
  • From: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>
• Re: ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH] drm/i915: Add debug print about hw config table size
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v3] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/i915/cmtg: Disable the CMTG (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v2] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH 00/14] DP DSC min/max src bpc fixes
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 02/14] drm/i915/dp: Return early if DSC not supported
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH] drm/i915: Add debug print about hw config table size
  • From: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/cmtg: Disable the CMTG
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PULL] drm-xe-fixes
  • From: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [RFC v2 6/6] drm/i915/dsc: Check if dsc prefill sufficient for vblank
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [RFC v2 4/6] drm/i915/scaler: Compute scling factors for pipe scaler
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [RFC v2 3/6] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [RFC v2 2/6] drm/i915/scaler: Add member to track scaler user
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [RFC v2 1/6] drm/i915/scaler: Add and compute scaling factors
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915: Add debug print about hw config table size
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/uc: Include requested frequency in slow firmware load messages
  • From: John.C.Harrison@xxxxxxxxx
• Re: [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] drm/i915: Add debug print about hw config table size
  • From: John.C.Harrison@xxxxxxxxx
• Re: [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE
  • From: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/display: Reduce global state funcs boilerplate
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/dp: 128b/132b uncompressed SST (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dg1: Fix power gate sequence. (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/display: Don't program DBUF_CTL tracker state service (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] drm-intel-next
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• RE: [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• RE: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• Re: [PATCH 04/10] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] drm/i915/psr: Ensure SFF/CFF bits are not written at their sample point
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH 8/8] drm/i915/scaler: Add scaler tracepoints
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dmc_wl: store register ranges in rodata
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 7/8] drm/i915/scaler: s/excdeed/exceed/
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 5/8] drm/i915/scaler: Nuke redundant code
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 4/8] drm/i915/scaler: Extract skl_scaler_max_dst_size()
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 3/8] drm/i915/scaler: Extract skl_scaler_min_dst_size()
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 2/8] drm/i915/scaler: Extract skl_scaler_max_src_size()
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/8] drm/i915/scaler: Extract skl_scaler_min_src_size()
  • From: Luca Coelho <luca@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/scaler: Scaler cleanups and tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• linux-next: build warnings after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dg1: Fix power gate sequence.
  • From: "Ghimiray, Himal Prasad" <himal.prasad.ghimiray@xxxxxxxxx>
• [PATCH i-g-t v2 4/4] tools/gputop: Add GT freq and c6 stats
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• [PATCH i-g-t v2 3/4] lib/igt_perf: Add utils to extract PMU event info
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• [PATCH i-g-t v2 2/4] lib/igt_drm_clients: Add pdev and driver info
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• [PATCH i-g-t v2 1/4] tools/gputop: Define data structs for PMU stats
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• Re: [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats
  • From: "Belgaumkar, Vinay" <vinay.belgaumkar@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: Reduce global state funcs boilerplate
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• RE: [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: Reduce global state funcs boilerplate
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Reduce global state funcs boilerplate
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] drm/i915/dmc_wl: Allow enable_dmc_wl=3 to mean "always locked"
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 3/4] drm/i915/dmc_wl: Allow enable_dmc_wl=2 to mean "match any register"
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 1/4] drm/i915/dmc_wl: Use enum values for enable_dmc_wl
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 2/4] drm/i915/dmc_wl: Show description string for enable_dmc_wl
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 0/4] drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dg1: Fix power gate sequence. (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dg1: Fix power gate sequence.
  • From: "Belgaumkar, Vinay" <vinay.belgaumkar@xxxxxxxxx>
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 0/3] drm/i915/display: Reduce global state funcs boilerplate
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 05/16] drm/i915/mst: remove crtc_state->pbn
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 00/16] drm/i915/dp: 128b/132b uncompressed SST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• [PATCH] drm/i915/dg1: Fix power gate sequence.
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Log reason for setting TAINT_WARN at reset
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: Don't program DBUF_CTL tracker state service (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for annotate i915_gem_object_trylock() as __must_check
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for annotate i915_gem_object_trylock() as __must_check
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for annotate i915_gem_object_trylock() as __must_check
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for Remove get_task_comm() and print task comm directly
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915: mark i915_gem_object_trylock() as __must_check
  • From: Rolf Eike Beer <eb@xxxxxxxxx>
• [PATCH v2 3/5] net: Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH v2 4/5] security: Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 1/2] drm/i915/selftests: check the return value of i915_gem_object_trylock()
  • From: Rolf Eike Beer <eb@xxxxxxxxx>
• [PATCH v2 1/5] kernel: Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH v2 5/5] drivers: Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH v2 2/5] arch: Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH v2 0/5] Remove get_task_comm() and print task comm directly
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 0/2] annotate i915_gem_object_trylock() as __must_check
  • From: Rolf Eike Beer <eb@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/display: Initialize pipe_src in compute stage
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• RE: [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/scaler: Scaler cleanups and tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/scaler: Scaler cleanups and tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 8/8] drm/i915/scaler: Add scaler tracepoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 7/8] drm/i915/scaler: s/excdeed/exceed/
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 5/8] drm/i915/scaler: Nuke redundant code
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 4/8] drm/i915/scaler: Extract skl_scaler_max_dst_size()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/8] drm/i915/scaler: Extract skl_scaler_min_dst_size()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/8] drm/i915/scaler: Extract skl_scaler_max_src_size()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/8] drm/i915/scaler: Extract skl_scaler_min_src_size()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/8] drm/i915/scaler: Scaler cleanups and tracepoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PULL] drm-misc-next
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
• Re: [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 03/10] mtd: intel-dg: implement access functions
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Add logging before setting TAINT_WARN
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/cx0_phy: Fix C10 pll programming sequence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases
  • From: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation
  • From: "Nilawar, Badal" <badal.nilawar@xxxxxxxxx>
• ✗ i915.CI.Full: failure for Display Global Histogram (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: store register ranges in rodata
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata
  • From: Zhi Wang <zhi.wang.linux@xxxxxxxxx>
• Re: [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Vodapalli, Ravi Kumar" <ravi.kumar.vodapalli@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] drm/i915: Include pixel format in plane tracpoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915: Pass the plane state explicitly to tracpoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915: Drop the extra "plane" from tracpoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/4] drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/4] drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for Display Global Histogram (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.Full: success for DP DSC min/max src bpc fixes (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Display Global Histogram (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: store register ranges in rodata
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxx>
• [PATCH v7 4/4] drm/crtc: Expose API to create drm crtc property for IET LUT
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH v7 3/4] drm/crtc: Expose API to create drm crtc property for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH v7 2/4] drm: Define ImageEnhancemenT LUT structures exposed to user
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH v7 1/4] drm: Define histogram structures exposed to user
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH v7 0/4] Display Global Histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata
  • From: "Garg, Nemesa" <nemesa.garg@xxxxxxxxx>
• Re: [PATCH] drm/i915/dmc_wl: store register ranges in rodata
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.
  • From: Krzysztof Karas <krzysztof.karas@xxxxxxxxx>
• [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915/dmc_wl: store register ranges in rodata
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/ci: uprev IGT (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/display: UHBR rates for Thunderbolt
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/display: drop unnecessary i915_drv.h includes (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY
  • From: "Manna, Animesh" <animesh.manna@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-intel-gt-next
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for Enable GuC SLPC default balancing strategies (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for Check if is vblank too short
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Check if is vblank too short
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/ci: uprev IGT (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: UHBR rates for Thunderbolt
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: UHBR rates for Thunderbolt
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: drop unnecessary i915_drv.h includes (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: "Poosa, Karthik" <karthik.poosa@xxxxxxxxx>
• RE: ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: "Ravali, JupallyX" <jupallyx.ravali@xxxxxxxxx>
• RE: [PATCH 14/14] drm/i915/dp_mst: Use link.{min/max}_bpp_x16
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH 10/14] drm/i915/dp_mst: Use pipe_bpp->limits.{max/min}_bpp for dsc
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• linux-next: manual merge of the drm-intel tree with the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/10] mtd: intel-dg: wake card on operations
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v3 03/10] mtd: intel-dg: implement access functions
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• RE: [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• [PATCH v2 1/2] drm/i915/display: Add MTL subplatforms definition
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• [PATCH v4 0/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v3 02/10] mtd: intel-dg: implement region enumeration
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ i915.CI.Full: failure for DP DSC min/max src bpc fixes (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH] drm/i915/guc/slpc: Print more SLPC debug status information
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [RFC v2 4/6] drm/i915/scaler: Compute scling factors for pipe scaler
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 6/6] drm/i915/dsc: Check if dsc prefill sufficient for vblank
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 3/6] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 1/6] drm/i915/scaler: Add and compute scaling factors
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 2/6] drm/i915/scaler: Add member to track scaler user
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• [RFC v2 0/6] Check if is vblank too short
  • From: Mitul Golani <mitulkumar.ajitkumar.golani@xxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service
  • From: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2] drm/ci: uprev IGT
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• ✓ i915.CI.Full: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/hdcp: Fix Repeater authentication during topology change
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] drm/connector: Expose only a properly inited connector
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt
  • From: Mika Kahola <mika.kahola@xxxxxxxxx>
• Re: ✗ i915.CI.Full: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/cx0_phy: Fix C10 pll programming sequence
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for DP DSC min/max src bpc fixes (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dsc: Expose dsc sink max slice count via debugfs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for DP DSC min/max src bpc fixes (rev11)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/xe3: FBC Dirty rect feature support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 2/4] drm/doc: Document device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: "Gote, Nitin R" <nitin.r.gote@xxxxxxxxx>
• Re: [PATCH 02/14] drm/i915/dp: Return early if DSC not supported
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] drm/i915/dp: Return early if DSC not supported
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: "Ravali, JupallyX" <jupallyx.ravali@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/hdcp: Fix Repeater authentication during topology change
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• ✓ i915.CI.Full: success for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/14] drm/i915/dp: Drop max_requested_bpc for dsc pipe_min/max bpp
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 10/14] drm/i915/dp_mst: Use pipe_bpp->limits.{max/min}_bpp for dsc
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 13/14] drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 14/14] drm/i915/dp_mst: Use link.{min/max}_bpp_x16
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 12/14] drm/i915/dp: Make dsc helpers accept const crtc_state pointers
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 11/14] drm/i915/dp: Use clamp for pipe_bpp limits with DSC
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 09/14] drm/i915/dp: Refactor pipe_bpp limits with dsc
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 07/14] drm/i915/dp_mst: Use helpers to get dsc min/max input bpc
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 05/14] drm/i915/dp: Remove HAS_DSC macro for intel_dp_dsc_max_src_input_bpc
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 06/14] drm/i915/dp: Return int from dsc_max/min_src_input_bpc helpers
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 00/14] DP DSC min/max src bpc fixes
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH] drm/i915/dsc: Expose dsc sink max slice count via debugfs
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dsc: Expose dsc sink max slice count via debugfs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v2 2/3] drm/i915/xe3: add dirty rect support for FBC
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v2 1/3] drm/i915/xe: add register definitions for fbc dirty rect support
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v2 0/3] drm/i915/xe3: FBC Dirty rect feature support
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• Re: [PATCH v10 2/4] drm/doc: Document device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH] drm/i915/hdcp: Fix Repeater authentication during topology change
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()
  • From: "Lin, Wayne" <Wayne.Lin@xxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✓ i915.CI.BAT: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Fix C10 pll programming sequence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] security: Replace get_task_comm() with %pTN
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/slpc: Add sysfs for SLPC power profiles
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• Re: [PATCH 5/7] security: Replace get_task_comm() with %pTN
  • From: Kees Cook <kees@xxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915: Async flip + compression, and some plane cleanups (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] security: Replace get_task_comm() with %pTN
  • From: Paul Moore <paul@xxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for Enable GuC SLPC default balancing strategies
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Enable GuC SLPC default balancing strategies
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PATCH 2/2] drm/i915/guc/slpc: Print more SLPC debug status information
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 1/2] drm/i915/guc/slpc: Enable GuC SLPC default strategies
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH 0/2] Enable GuC SLPC default balancing strategies
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH 6/7] drivers: Repace get_task_comm() with %pTN
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH 4/5] drm/amdgpu: Constify 'struct bin_attribute'
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/cx0_phy: Fix C10 pll programming sequence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: warning for drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/display: program DBUF_CTL tracker state service to 0x8 (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• RE: [PATCH v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/cx0_phy: Fix C10 pll programming sequence
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915: Async flip + compression, and some plane cleanups (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: drop unnecessary i915_drv.h includes
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: "Lazar, Lijo" <lijo.lazar@xxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: "Lazar, Lijo" <lijo.lazar@xxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: "Lazar, Lijo" <lijo.lazar@xxxxxxx>
• Re: [RESEND 6/6] drm/i915/display: drop i915_drv.h include from intel_display_trace.h
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8
  • From: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/bios: add VBT DSI DSC debug logging (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• [PATCH v3 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v10 1/4] drm: Introduce device wedged event
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.
  • From: Sebastian Brzezinka <sebastian.brzezinka@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• RE: [PATCH v2 0/6] prunue audio frequencies based on bw limits for DP2
  • From: "B, Jeevan" <jeevan.b@xxxxxxxxx>
• Re: [PATCH v2 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v3 0/5] drm/i915/dp: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• [PATCH v2 0/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH 5/5] drm/amd/display: Constify 'struct bin_attribute'
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/dp: convert to struct intel_display (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] drm/connector: Add deprication notes for drm_connector_register/unregister
  • From: Simona Vetter <simona.vetter@xxxxxxxx>
• Re: [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• RE: ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: "Ravali, JupallyX" <jupallyx.ravali@xxxxxxxxx>
• Re: [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drm/i915: split out i9xx_wm_regs.h
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/bios: add VBT DSI DSC debug logging (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8
  • From: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@xxxxxxxxx>
• Re: [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm: Constify 'struct bin_attribute'
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] drm/connector: Expose only a properly inited connector
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps
  • From: "Maxime Ripard" <mripard@xxxxxxxxxx>
• Re: [PATCH v3 0/7] drm/connector: Expose only a properly inited connector
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3 09/11] drm/tests: Add tests for drm_connector_dynamic_init()/register()
  • From: "Maxime Ripard" <mripard@xxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm: Constify 'struct bin_attribute'
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm: Constify 'struct bin_attribute'
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/i915: move DDI_CLK_VALFREQ next to other Cx0 PHY registers
  • From: Luca Coelho <luca@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/xe3: do not configure auto min dbuf for cursor WMs (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/i915: relocate _VGA_MSR_WRITE register definition
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/3] drm/i915: split out i9xx_wm_regs.h
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 3/5] drm/i915: Constify 'struct bin_attribute'
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drm/sysfs: Constify 'struct bin_attribute'
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp,hdmi}_connector() return type
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/dp: convert to struct intel_display (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] drm: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 5/5] drm/amd/display: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 4/5] drm/amdgpu: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 1/5] drm/sysfs: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 2/5] drm/lima: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 3/5] drm/i915: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Do not report timeout on suspend
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: convert to struct intel_display (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PULL] drm-misc-next
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Christian König <christian.koenig@xxxxxxx>
• RE: [PATCH] drm/i915/xe3: do not configure auto min dbuf for cursor WMs
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/xe3: do not configure auto min dbuf for cursor WMs (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for PSR DSB support
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for PSR DSB support
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/connector: make mode_valid() callback accept const mode pointer (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/connector: make mode_valid() callback accept const mode pointer (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/connector: make mode_valid() callback accept const mode pointer (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/5] drm/connector: make mode_valid_ctx take a const struct drm_display_mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/5] drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/5] drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/guc: Update guc_err message to show outstanding g2h responses
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915: Async flip + compression, and some plane cleanups (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Fix some races/bugs in GuC engine busyness
  • From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915: DSB+VRR (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: DSB+VRR (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: DSB+VRR (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/guc: Update guc_err message to show outstanding g2h responses
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/guc: Update guc_err message to show outstanding g2h responses
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• [PATCH] drm/i915/guc: Update guc_err message to show outstanding g2h responses
  • From: Jesus Narvaez <jesus.narvaez@xxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for drm/i915/xe3: do not configure auto min dbuf for cursor WMs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup
  • From: Janusz Krzysztofik <janusz.krzysztofik@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Add WA_14018221282
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v3 3/5] drm/i915/dp: convert to struct intel_display
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC v0 06/13] drm/i915/mst: add helper independent of MST for figuring out the TU
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH 00/23] Use VRR timing generator for fixed refresh rate modes
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] vsprintf: Add %pTN to print task name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/display: use ERR_PTR on DP tunnel manager creation fail
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: ✗ i915.CI.Full: failure for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev3)
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v3] drm/display: use ERR_PTR on DP tunnel manager creation fail
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: split out i9xx_wm_regs.h
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: ✗ i915.CI.Full: failure for drm/connector: Expose only a properly inited connector
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp,hdmi}_connector() return type
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ i915.CI.BAT: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v3 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• [PATCH 0/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/6] drm/i915/ddi: only call shutdown hooks for valid encoders
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 5/6] drm/i915/display: add intel_encoder_is_hdmi()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 3/6] drm/i915/hdmi: add error handling in g4x_hdmi_init()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp, hdmi}_connector() return type
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH 0/1] drm/amdgpu: Use device wedged event
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH v10 2/4] drm/doc: Document device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• Re: [PATCH 1/7] vsprintf: Add %pTN to print task name
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 6/7] drivers: Repace get_task_comm() with %pTN
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 1/7] vsprintf: Add %pTN to print task name
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 7/7] fs: Use %pTN to print task name
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 3/7] arch: Replace get_task_comm() with %pTN
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• [PATCH 0/7] vsprintf: Add %pTN to print Task Name
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>
• Re: [PATCH v10 1/4] drm: Introduce device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• [PATCH 0/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• [PATCH 1/1] drm/amdgpu: Use device wedged event
  • From: André Almeida <andrealmeid@xxxxxxxxxx>
• [PATCH 5/7] security: Replace get_task_comm() with %pTN
  • From: Yafang Shao <laoar.shao@xxxxxxxxx>