Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of vlv_dsi_pll.[ch] to struct
intel_display.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_display.c | 3 +-
drivers/gpu/drm/i915/display/vlv_dsi.c | 3 +-
drivers/gpu/drm/i915/display/vlv_dsi_pll.c | 118 +++++++++----------
drivers/gpu/drm/i915/display/vlv_dsi_pll.h | 5 +-
4 files changed, 63 insertions(+), 66 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index d7243848fb23..222bc01d4682 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3834,7 +3834,6 @@ static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
struct intel_display_power_domain_set *power_domain_set)
{
struct intel_display *display = to_intel_display(crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder;
enum port port;
u32 tmp;
@@ -3856,7 +3855,7 @@ static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
* registers/MIPI[BXT]. We can break out here early, since we
* need the same DSI PLL to be enabled for both DSI ports.
*/
- if (!bxt_dsi_pll_is_enabled(dev_priv))
+ if (!bxt_dsi_pll_is_enabled(display))
break;
/* XXX: this works for video mode only */
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 6ddf33de85d3..346737f15fa9 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -936,7 +936,6 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct intel_display *display = to_intel_display(encoder);
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
intel_wakeref_t wakeref;
enum port port;
@@ -955,7 +954,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
* machine. See BSpec North Display Engine registers/MIPI[BXT].
*/
if ((display->platform.geminilake || display->platform.broxton) &&
- !bxt_dsi_pll_is_enabled(dev_priv))
+ !bxt_dsi_pll_is_enabled(display))
goto out_put_power;
/* XXX: this only works for one DSI output */
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
index 2ed47e7d1051..7ce924a5ef90 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
@@ -57,7 +57,7 @@ static u32 dsi_clk_from_pclk(u32 pclk, enum mipi_dsi_pixel_format fmt,
return dsi_clk_khz;
}
-static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
+static int dsi_calc_mnp(struct intel_display *display,
struct intel_crtc_state *config,
int target_dsi_clk)
{
@@ -68,11 +68,11 @@ static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
/* target_dsi_clk is expected in kHz */
if (target_dsi_clk < 300000 || target_dsi_clk > 1150000) {
- drm_err(&dev_priv->drm, "DSI CLK Out of Range\n");
+ drm_err(display->drm, "DSI CLK Out of Range\n");
return -ECHRNG;
}
- if (IS_CHERRYVIEW(dev_priv)) {
+ if (display->platform.cherryview) {
ref_clk = 100000;
n = 4;
m_min = 70;
@@ -116,13 +116,13 @@ static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
static int vlv_dsi_pclk(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
u32 dsi_clock;
u32 pll_ctl, pll_div;
u32 m = 0, p = 0, n;
- int refclk = IS_CHERRYVIEW(dev_priv) ? 100000 : 25000;
+ int refclk = display->platform.cherryview ? 100000 : 25000;
int i;
pll_ctl = config->dsi_pll.ctrl;
@@ -147,7 +147,7 @@ static int vlv_dsi_pclk(struct intel_encoder *encoder,
p--;
if (!p) {
- drm_err(&dev_priv->drm, "wrong P1 divisor\n");
+ drm_err(display->drm, "wrong P1 divisor\n");
return 0;
}
@@ -157,7 +157,7 @@ static int vlv_dsi_pclk(struct intel_encoder *encoder,
}
if (i == ARRAY_SIZE(lfsr_converts)) {
- drm_err(&dev_priv->drm, "wrong m_seed programmed\n");
+ drm_err(display->drm, "wrong m_seed programmed\n");
return 0;
}
@@ -175,16 +175,16 @@ static int vlv_dsi_pclk(struct intel_encoder *encoder,
int vlv_dsi_pll_compute(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
int pclk, dsi_clk, ret;
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
intel_dsi->lane_count);
- ret = dsi_calc_mnp(dev_priv, config, dsi_clk);
+ ret = dsi_calc_mnp(display, config, dsi_clk);
if (ret) {
- drm_dbg_kms(&dev_priv->drm, "dsi_calc_mnp failed\n");
+ drm_dbg_kms(display->drm, "dsi_calc_mnp failed\n");
return ret;
}
@@ -196,7 +196,7 @@ int vlv_dsi_pll_compute(struct intel_encoder *encoder,
config->dsi_pll.ctrl |= DSI_PLL_VCO_EN;
- drm_dbg_kms(&dev_priv->drm, "dsi pll div %08x, ctrl %08x\n",
+ drm_dbg_kms(display->drm, "dsi pll div %08x, ctrl %08x\n",
config->dsi_pll.div, config->dsi_pll.ctrl);
pclk = vlv_dsi_pclk(encoder, config);
@@ -213,9 +213,10 @@ int vlv_dsi_pll_compute(struct intel_encoder *encoder,
void vlv_dsi_pll_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *config)
{
+ struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- drm_dbg_kms(&dev_priv->drm, "\n");
+ drm_dbg_kms(display->drm, "\n");
vlv_cck_get(dev_priv);
@@ -235,20 +236,21 @@ void vlv_dsi_pll_enable(struct intel_encoder *encoder,
DSI_PLL_LOCK, 20)) {
vlv_cck_put(dev_priv);
- drm_err(&dev_priv->drm, "DSI PLL lock failed\n");
+ drm_err(display->drm, "DSI PLL lock failed\n");
return;
}
vlv_cck_put(dev_priv);
- drm_dbg_kms(&dev_priv->drm, "DSI PLL locked\n");
+ drm_dbg_kms(display->drm, "DSI PLL locked\n");
}
void vlv_dsi_pll_disable(struct intel_encoder *encoder)
{
+ struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 tmp;
- drm_dbg_kms(&dev_priv->drm, "\n");
+ drm_dbg_kms(display->drm, "\n");
vlv_cck_get(dev_priv);
@@ -260,14 +262,14 @@ void vlv_dsi_pll_disable(struct intel_encoder *encoder)
vlv_cck_put(dev_priv);
}
-bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
+bool bxt_dsi_pll_is_enabled(struct intel_display *display)
{
bool enabled;
u32 val;
u32 mask;
mask = BXT_DSI_PLL_DO_ENABLE | BXT_DSI_PLL_LOCKED;
- val = intel_de_read(dev_priv, BXT_DSI_PLL_ENABLE);
+ val = intel_de_read(display, BXT_DSI_PLL_ENABLE);
enabled = (val & mask) == mask;
if (!enabled)
@@ -281,17 +283,17 @@ bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
* times, and since accessing DSI registers with invalid dividers
* causes a system hang.
*/
- val = intel_de_read(dev_priv, BXT_DSI_PLL_CTL);
- if (IS_GEMINILAKE(dev_priv)) {
+ val = intel_de_read(display, BXT_DSI_PLL_CTL);
+ if (display->platform.geminilake) {
if (!(val & BXT_DSIA_16X_MASK)) {
- drm_dbg(&dev_priv->drm,
- "Invalid PLL divider (%08x)\n", val);
+ drm_dbg_kms(display->drm,
+ "Invalid PLL divider (%08x)\n", val);
enabled = false;
}
} else {
if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) {
- drm_dbg(&dev_priv->drm,
- "Invalid PLL divider (%08x)\n", val);
+ drm_dbg_kms(display->drm,
+ "Invalid PLL divider (%08x)\n", val);
enabled = false;
}
}
@@ -301,29 +303,30 @@ bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
void bxt_dsi_pll_disable(struct intel_encoder *encoder)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
- drm_dbg_kms(&dev_priv->drm, "\n");
+ drm_dbg_kms(display->drm, "\n");
- intel_de_rmw(dev_priv, BXT_DSI_PLL_ENABLE, BXT_DSI_PLL_DO_ENABLE, 0);
+ intel_de_rmw(display, BXT_DSI_PLL_ENABLE, BXT_DSI_PLL_DO_ENABLE, 0);
/*
* PLL lock should deassert within 200us.
* Wait up to 1ms before timing out.
*/
- if (intel_de_wait_for_clear(dev_priv, BXT_DSI_PLL_ENABLE,
+ if (intel_de_wait_for_clear(display, BXT_DSI_PLL_ENABLE,
BXT_DSI_PLL_LOCKED, 1))
- drm_err(&dev_priv->drm,
+ drm_err(display->drm,
"Timeout waiting for PLL lock deassertion\n");
}
u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
+ struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 pll_ctl, pll_div;
- drm_dbg_kms(&dev_priv->drm, "\n");
+ drm_dbg_kms(display->drm, "\n");
vlv_cck_get(dev_priv);
pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
@@ -352,14 +355,14 @@ static int bxt_dsi_pclk(struct intel_encoder *encoder,
u32 bxt_dsi_get_pclk(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
u32 pclk;
- config->dsi_pll.ctrl = intel_de_read(dev_priv, BXT_DSI_PLL_CTL);
+ config->dsi_pll.ctrl = intel_de_read(display, BXT_DSI_PLL_CTL);
pclk = bxt_dsi_pclk(encoder, config);
- drm_dbg(&dev_priv->drm, "Calculated pclk=%u\n", pclk);
+ drm_dbg_kms(display->drm, "Calculated pclk=%u\n", pclk);
return pclk;
}
@@ -375,10 +378,9 @@ void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
temp | intel_dsi->escape_clk_div << ESCAPE_CLOCK_DIVIDER_SHIFT);
}
-static void glk_dsi_program_esc_clock(struct drm_device *dev,
- const struct intel_crtc_state *config)
+static void glk_dsi_program_esc_clock(struct intel_display *display,
+ const struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
u32 dsi_rate = 0;
u32 pll_ratio = 0;
u32 ddr_clk = 0;
@@ -415,17 +417,16 @@ static void glk_dsi_program_esc_clock(struct drm_device *dev,
txesc2_div = min_t(u32, div2_value, 10);
- intel_de_write(dev_priv, MIPIO_TXESC_CLK_DIV1,
+ intel_de_write(display, MIPIO_TXESC_CLK_DIV1,
(1 << (txesc1_div - 1)) & GLK_TX_ESC_CLK_DIV1_MASK);
- intel_de_write(dev_priv, MIPIO_TXESC_CLK_DIV2,
+ intel_de_write(display, MIPIO_TXESC_CLK_DIV2,
(1 << (txesc2_div - 1)) & GLK_TX_ESC_CLK_DIV2_MASK);
}
/* Program BXT Mipi clocks and dividers */
-static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
+static void bxt_dsi_program_clocks(struct intel_display *display, enum port port,
const struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
u32 tmp;
u32 dsi_rate = 0;
u32 pll_ratio = 0;
@@ -436,7 +437,7 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
u32 mipi_8by3_divider;
/* Clear old configurations */
- tmp = intel_de_read(dev_priv, BXT_MIPI_CLOCK_CTL);
+ tmp = intel_de_read(display, BXT_MIPI_CLOCK_CTL);
tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
@@ -472,13 +473,13 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
tmp |= BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, rx_div_lower);
tmp |= BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, rx_div_upper);
- intel_de_write(dev_priv, BXT_MIPI_CLOCK_CTL, tmp);
+ intel_de_write(display, BXT_MIPI_CLOCK_CTL, tmp);
}
int bxt_dsi_pll_compute(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
u8 dsi_ratio, dsi_ratio_min, dsi_ratio_max;
u32 dsi_clk;
@@ -494,7 +495,7 @@ int bxt_dsi_pll_compute(struct intel_encoder *encoder,
*/
dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);
- if (IS_BROXTON(dev_priv)) {
+ if (display->platform.broxton) {
dsi_ratio_min = BXT_DSI_PLL_RATIO_MIN;
dsi_ratio_max = BXT_DSI_PLL_RATIO_MAX;
} else {
@@ -503,11 +504,11 @@ int bxt_dsi_pll_compute(struct intel_encoder *encoder,
}
if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) {
- drm_err(&dev_priv->drm,
+ drm_err(display->drm,
"Can't get a suitable ratio from DSI PLL ratios\n");
return -ECHRNG;
} else
- drm_dbg_kms(&dev_priv->drm, "DSI PLL calculation is Done!!\n");
+ drm_dbg_kms(display->drm, "DSI PLL calculation is Done!!\n");
/*
* Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
@@ -519,7 +520,7 @@ int bxt_dsi_pll_compute(struct intel_encoder *encoder,
/* As per recommendation from hardware team,
* Prog PVD ratio =1 if dsi ratio <= 50
*/
- if (IS_BROXTON(dev_priv) && dsi_ratio <= 50)
+ if (display->platform.broxton && dsi_ratio <= 50)
config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1;
pclk = bxt_dsi_pclk(encoder, config);
@@ -536,46 +537,45 @@ int bxt_dsi_pll_compute(struct intel_encoder *encoder,
void bxt_dsi_pll_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *config)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_display *display = to_intel_display(encoder);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
enum port port;
- drm_dbg_kms(&dev_priv->drm, "\n");
+ drm_dbg_kms(display->drm, "\n");
/* Configure PLL vales */
- intel_de_write(dev_priv, BXT_DSI_PLL_CTL, config->dsi_pll.ctrl);
- intel_de_posting_read(dev_priv, BXT_DSI_PLL_CTL);
+ intel_de_write(display, BXT_DSI_PLL_CTL, config->dsi_pll.ctrl);
+ intel_de_posting_read(display, BXT_DSI_PLL_CTL);
/* Program TX, RX, Dphy clocks */
- if (IS_BROXTON(dev_priv)) {
+ if (display->platform.broxton) {
for_each_dsi_port(port, intel_dsi->ports)
- bxt_dsi_program_clocks(encoder->base.dev, port, config);
+ bxt_dsi_program_clocks(display, port, config);
} else {
- glk_dsi_program_esc_clock(encoder->base.dev, config);
+ glk_dsi_program_esc_clock(display, config);
}
/* Enable DSI PLL */
- intel_de_rmw(dev_priv, BXT_DSI_PLL_ENABLE, 0, BXT_DSI_PLL_DO_ENABLE);
+ intel_de_rmw(display, BXT_DSI_PLL_ENABLE, 0, BXT_DSI_PLL_DO_ENABLE);
/* Timeout and fail if PLL not locked */
- if (intel_de_wait_for_set(dev_priv, BXT_DSI_PLL_ENABLE,
+ if (intel_de_wait_for_set(display, BXT_DSI_PLL_ENABLE,
BXT_DSI_PLL_LOCKED, 1)) {
- drm_err(&dev_priv->drm,
+ drm_err(display->drm,
"Timed out waiting for DSI PLL to lock\n");
return;
}
- drm_dbg_kms(&dev_priv->drm, "DSI PLL locked\n");
+ drm_dbg_kms(display->drm, "DSI PLL locked\n");
}
void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
struct intel_display *display = to_intel_display(encoder);
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 tmp;
/* Clear old configurations */
- if (IS_BROXTON(dev_priv)) {
+ if (display->platform.broxton) {
tmp = intel_de_read(display, BXT_MIPI_CLOCK_CTL);
tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi_pll.h b/drivers/gpu/drm/i915/display/vlv_dsi_pll.h
index f975660fa609..f26e31a7dd69 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi_pll.h
+++ b/drivers/gpu/drm/i915/display/vlv_dsi_pll.h
@@ -9,7 +9,6 @@
#include <linux/types.h>
enum port;
-struct drm_i915_private;
struct intel_crtc_state;
struct intel_display;
struct intel_encoder;
@@ -33,11 +32,11 @@ u32 bxt_dsi_get_pclk(struct intel_encoder *encoder,
void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port);
#ifdef I915
-bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv);
+bool bxt_dsi_pll_is_enabled(struct intel_display *display);
void assert_dsi_pll_enabled(struct intel_display *display);
void assert_dsi_pll_disabled(struct intel_display *display);
#else
-static inline bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
+static inline bool bxt_dsi_pll_is_enabled(struct intel_display *display)
{
return false;
}
--
2.39.5
