Linux Wireless

• Thread Index

• Re: [PATCH for-5.18 v2] ath9k: Fix usage of driver-private space in tx_info
  • From: Peter Seiderer <ps.report@xxxxxxx>
• Re: [PATCH v1 2/2] mac80211: minstrel_ht: fill all requested rates
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH for-5.18 v2] ath9k: Fix usage of driver-private space in tx_info
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH] ath11k: do not return random value
  • From: Michael Straube <straube.linux@xxxxxxxxx>
• RE: [PATCH 04/12] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: "Peer, Ilan" <ilan.peer@xxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Peter Seiderer <ps.report@xxxxxxx>
• Re: [PATCH] mt76: mt7921: Add hotspot mode support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH] mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_mask
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v1 1/2] ath9k: fix ath_get_rate_txpower() to respect the rate list end tag
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [v5.18] Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• RE: [RFC v2] mac80211: prepare sta handling for MLO support
  • From: "Sriram R (QUIC)" <quic_srirrama@xxxxxxxxxxx>
• Re: [RFC v2] mac80211: prepare sta handling for MLO support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] mac80211: prepare sta handling for MLO support
  • From: Sriram R <quic_srirrama@xxxxxxxxxxx>
• Re: [RFC v2] mac80211: prepare sta handling for MLO support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• RE: [RFC v2] mac80211: prepare sta handling for MLO support
  • From: "Sriram R (QUIC)" <quic_srirrama@xxxxxxxxxxx>
• Re: rtw_8822ce wifi regression after kernel update from 5.15 to 5.16
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [RFC v2] mac80211: prepare sta handling for MLO support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Peter Seiderer <ps.report@xxxxxxx>
• [PATCH] ath11k: do not return random value
  • From: Michael Straube <straube.linux@xxxxxxxxx>
• Re: [PATCH v10 0/1] wfx: get out from the staging area
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v10 0/1] wfx: get out from the staging area
  • From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
• Re: Build regressions/improvements in v5.18-rc1
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• [PATCH] mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rate
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] mt76: m7915: do not pass data pointer to mt7915_mcu_muru_debug_set
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] ath11k: select QRTR for AHB as well
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH] mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: Build regressions/improvements in v5.18-rc1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH RFC 0/3] ath10k: add encapsulation offloading support
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: select QRTR for AHB as well
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [Linux 5.18-rc1] WARNING: possible circular locking dependency detected at (rtw_ops_config, ieee80211_mgd_probe_ap)
  • From: Ammar Faizi <ammarfaizi2@xxxxxxxxxxx>
• Re: [PATCH] wireless: Change Kconfig to select WEXT_PRIV
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] rtw88: 8821ce: add support for device ID 0xb821
  • From: Jimmy Hon <honyuenkwun@xxxxxxxxx>
• Re: [PATCH] wireless: Change Kconfig to select WEXT_PRIV
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] wireless: Change Kconfig to select WEXT_PRIV
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] wireless: Change Kconfig to select WEXT_PRIV
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] mt76: mt7921: Fix the error handling path of mt7921_pci_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v2] wireless-regdb: Update regulatory rules for Australia (AU)
  • From: Seth Forshee <sforshee@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Peter Seiderer <ps.report@xxxxxxx>
• [PATCH RFC 3/3] ath10k: add encapsulation offloading support
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• [PATCH RFC 2/3] ath10k: turn rawmode into frame_mode
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• [PATCH RFC 1/3] ath10k: improve tx status reporting
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• [PATCH RFC 0/3] ath10k: add encapsulation offloading support
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• [PATCH v1 1/2] ath9k: fix ath_get_rate_txpower() to respect the rate list end tag
  • From: Peter Seiderer <ps.report@xxxxxxx>
• [PATCH v1 2/2] mac80211: minstrel_ht: fill all requested rates
  • From: Peter Seiderer <ps.report@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Peter Seiderer <ps.report@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v5.18] ath9k: Save rate counts before clearing tx status area
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH net-next] orinoco: Prepare cleanup of powerpc's asm/prom.h
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH net-next] orinoco: Prepare cleanup of powerpc's asm/prom.h
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH] ath11k: select QRTR for AHB as well
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [wireless:main] BUILD SUCCESS 61a891efbb1099bb7bdcedfc50f802fabbe46a0e
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iwlwifi: fw: move memset before early return
  • From: Tom Rix <trix@xxxxxxxxxx>
• [PATCH] iwlwifi: mvm: initialize seq variable
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v4 2/2] ath11k: Add support for SAR
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 1/1] nl80211: Prevent out-of-bounds read when processing NL80211_ATTR_REG_ALPHA2
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 0/3] ath11k: mhi cleanup
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] ath11k: add support for extended wmi service bit
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH 3/3] ath11k: mhi: remove unnecessary goto from ath11k_mhi_start()
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH 2/3] ath11k: mhi: add error handling for suspend and resume
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH 0/3] ath11k: mhi cleanup
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH 1/3] ath11k: mhi: remove state machine
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Peter Seiderer <ps.report@xxxxxxx>
• [no subject]
  • From: Unknown
• Re: [RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 02/37] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] ath11k: select QRTR for AHB as well
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 01/22] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 38/65] mt76: mt7615: Fix assigning negative values to unsigned variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 01/16] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 28/65] iwlwifi: mvm: Correctly set fragmented EBS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.17 079/149] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 02/29] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 09/65] ath11k: fix kernel panic during unload/load ath11k modules
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 10/65] ath11k: mhi: use mhi_sync_power_up()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 099/109] mt76: fix monitor mode crash with sdio driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 14/98] ath11k: pci: fix crash on suspend if board file is not found
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 58/98] mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 058/109] rtw89: fix RCU usage in rtw89_core_txq_push()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 031/109] cfg80211: don't add non transmitted BSS to 6GHz scanned channels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 61/98] mt76: mt7615: Fix assigning negative values to unsigned variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 15/65] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 02/65] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 069/109] mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 054/109] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 13/98] ath11k: fix kernel panic during unload/load ath11k modules
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 056/109] iwlwifi: mvm: move only to an enabled channel
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 44/98] iwlwifi: mvm: Correctly set fragmented EBS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 45/98] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 23/98] mt76: mt7921: fix crash when startup fails.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 88/98] mt76: fix monitor mode crash with sdio driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 25/98] cfg80211: don't add non transmitted BSS to 6GHz scanned channels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 030/109] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 029/109] mt76: mt7921: fix crash when startup fails.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 02/98] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 24/98] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/98] ath11k: mhi: use mhi_sync_power_up()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 46/98] iwlwifi: mvm: move only to an enabled channel
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 16/65] cfg80211: don't add non transmitted BSS to 6GHz scanned channels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 055/109] iwlwifi: fix small doc mistake for iwl_fw_ini_addr_val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 053/109] iwlwifi: mvm: Correctly set fragmented EBS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 072/109] mt76: mt7615: Fix assigning negative values to unsigned variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 020/109] ath11k: pci: fix crash on suspend if board file is not found
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 021/109] ath11k: mhi: use mhi_sync_power_up()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 019/109] ath11k: fix kernel panic during unload/load ath11k modules
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 085/149] rtw89: fix RCU usage in rtw89_core_txq_push()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 002/109] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 078/149] iwlwifi: mvm: Correctly set fragmented EBS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 099/149] mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 081/149] iwlwifi: mvm: move only to an enabled channel
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 103/149] mt76: mt7615: Fix assigning negative values to unsigned variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 080/149] iwlwifi: fix small doc mistake for iwl_fw_ini_addr_val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 086/149] ath11k: Fix frames flush failure caused by deadlock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 140/149] iwlwifi: mei: fix building iwlmei
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 079/149] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 088/149] rtw88: change rtw_info() to proper message level
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 138/149] mt76: fix monitor mode crash with sdio driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 042/149] cfg80211: don't add non transmitted BSS to 6GHz scanned channels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 040/149] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 039/149] mt76: mt7921: fix crash when startup fails.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 030/149] ath11k: pci: fix crash on suspend if board file is not found
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 031/149] ath11k: mhi: use mhi_sync_power_up()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 029/149] ath11k: fix kernel panic during unload/load ath11k modules
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 003/149] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: "Nagarajan Maran (QUIC)" <quic_nmaran@xxxxxxxxxxx>
• RE: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: "Nagarajan Maran (QUIC)" <quic_nmaran@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ipw2x00: use DEVICE_ATTR_*() macro
  • From: Andrew Lunn <andrew@xxxxxxx>
• RE: [PATCH v4 0/2] ath11k: Add support for SAR
  • From: "Baochen Qiang (QUIC)" <quic_bqiang@xxxxxxxxxxx>
• Re: [PATCH v4 0/2] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v4 1/2] ath11k: add support for extended wmi service bit
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v4 2/2] ath11k: Add support for SAR
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v4 0/2] ath11k: Add support for SAR
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] ath11k: add support for extended wmi service bit
  • From: "Baochen Qiang (QUIC)" <quic_bqiang@xxxxxxxxxxx>
• RE: [PATCH] ath11k: Change max no of active probe SSID and BSSID to fw capability
  • From: Karthikeyan Kathirvel <kathirve@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ath11k: Change max no of active probe SSID and BSSID to fw capability
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath9k: make is2ghz consistent in ar9003_eeprom
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 1/2] ath10k: add support for MSDU IDs for USB devices
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: fw: Replace zero-length arrays with flexible-array members
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] ath11k: add support for extended wmi service bit
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 0/2] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: MT7921 Causing Kernel to Freeze after Reboot
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH 1/1] nl80211: Prevent out-of-bounds read when processing NL80211_ATTR_REG_ALPHA2
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] ath11k: select QRTR for AHB as well
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH][next] iwlwifi: mei: Replace zero-length array with flexible-array member
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• Re: [PATCH][next] iwlwifi: fw: Replace zero-length arrays with flexible-array members
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• [PATCH v3 2/2] ath11k: Add support for SAR
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v3 1/2] ath11k: add support for extended wmi service bit
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v3 0/2] ath11k: Add support for SAR
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH] ipw2x00: Fix potential NULL dereference in libipw_xmit()
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• RE: [PATCH] ath11k: Add support for SAR
  • From: "Baochen Qiang (QUIC)" <quic_bqiang@xxxxxxxxxxx>
• Re: [PATCH] mt76: mt7921: Add hotspot mode support
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: mark wil6210 as orphan
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: claim include/uapi/linux/wireless.h
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2 3/4] rtw89: coex: Add case for scan offload
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v2 1/4] rtw89: change idle mode condition during hw_scan
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v2 2/4] rtw89: packet offload handler to avoid warning
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v2 4/4] rtw89: fix misconfiguration on hw_scan channel time
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v2 0/4] rtw89: some fixes related to hw_scan
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• Re: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH] ipw2x00: use DEVICE_ATTR_*() macro
  • From: Meng Tang <tangmeng@xxxxxxxxxxxxx>
• Re: [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v2] wireless-regdb: Update regulatory rules for Australia (AU)
  • From: Richard Huynh <voxlympha@xxxxxxxxx>
• Re: [PATCH] wireless-regdb: add missing spaces for US S1G rules
  • From: Seth Forshee <seth@xxxxxxxxxx>
• Re: [PATCH] wireless-regdb: Update regulatory rules for Australia (AU)
  • From: Seth Forshee <sforshee@xxxxxxxxxx>
• [PATCH] mt76: mt7921: Add hotspot mode support
  • From: <sean.wang@xxxxxxxxxxxx>
• RE: [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: "Moore, Robert" <robert.moore@xxxxxxxxx>
• Re: Bug 215715 - PCI device (iwlwifi) is not working due to PCI power state change issues
  • From: "Rafael J. Wysocki" <rafael.j.wysocki@xxxxxxxxx>
• Re: [PATCH 11/22] rdmavt: Replace comments with C99 initializers
  • From: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: "Nagarajan Maran (QUIC)" <quic_nmaran@xxxxxxxxxxx>
• Re: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: "Nagarajan Maran (QUIC)" <quic_nmaran@xxxxxxxxxxx>
• Re: [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH v5.18] ath11k: fix driver initialization failure with WoW unsupported hw
  • From: Nagarajan Maran <quic_nmaran@xxxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH v5.18] Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"
  • From: Anilkumar Kolli <quic_akolli@xxxxxxxxxxx>
• [PATCH] ath11k: Remove unnecessary delay in ath11k_core_suspend
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• [PATCH v5.18] ath9k: Properly clear TX status area before reporting to mac80211
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• [PATCH] MAINTAINERS: mark wil6210 as orphan
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: UBSAN: invalid-load in net/mac80211/status.c:1164:21
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: UBSAN: invalid-load in net/mac80211/status.c:1164:21
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [wireless:main] BUILD SUCCESS 24b488061b97a6c6ff82c433e6843eaf54f41f3c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• UBSAN: invalid-load in net/mac80211/status.c:1164:21
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [mac80211] 96e8c9671b: BUG:sleeping_function_called_from_invalid_context_at_include/linux/sched/mm.h
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH 19/22 v2] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 1/2] ath10k: add support for MSDU IDs for USB devices
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2] ath11k: reduce the wait time of 11d scan and hw scan while add interface
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 3/3] ath11k: add support to search regdb data in board-2.bin for WCN6855
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v4] wcn36xx: Implement tx_rate reporting
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 00/12] add support for WCN6750
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 00/12] add support for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [PATCH 19/22 v2] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: Revert: ath: add support for special 0x0 regulatory domain
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Revert: ath: add support for special 0x0 regulatory domain
  • From: Alvin Šipraga <ALSI@xxxxxxxxxxxxxxx>
• Re: Revert: ath: add support for special 0x0 regulatory domain
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] mac80211: report per-chain signal values through ethtool.
  • From: greearb@xxxxxxxxxxxxxxx
• Re: [PATCH] ipw2200: Fix permissions setted by DEVICE_ATTR
  • From: Stanislav Yakovlev <stas.yakovlev@xxxxxxxxx>
• Patch for "ath: add support for special 0x0 regulatory domain" does not enable 5ghz bands on later kernels
  • From: Cale Collins <ccollins@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ath10k: add support for MSDU IDs for USB devices
  • From: Erik Stromdahl <erik.stromdahl@xxxxxxxxx>
• [PATCH] ath11k: Change max no of active probe SSID and BSSID to fw capability
  • From: Karthikeyan Kathirvel <quic_kathirve@xxxxxxxxxxx>
• Re: [PATCH 09/22] gpio-winbond: Use C99 initializers
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC v2] mac80211: prepare sta handling for MLO support
  • From: Sriram R <quic_srirrama@xxxxxxxxxxx>
• RE: [RFC] mac80211: prepare sta handling for MLO support
  • From: "Sriram R (QUIC)" <quic_srirrama@xxxxxxxxxxx>
• Re: [OE-core] Which vendors maintain SDIO WiFi in mainline stable kernel
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [OE-core] Which vendors maintain SDIO WiFi in mainline stable kernel
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
• Re: Bug 215715 - PCI device (iwlwifi) is not working due to PCI power state change issues
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Which vendors maintain SDIO WiFi in mainline stable kernel
  • From: Jupiter <jupiter.hce@xxxxxxxxx>
• Re: [RFC PATCH] mac80211: mlme: Handle Puncturing information received from the AP
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] First Patch: Add Printk to pci.c
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] First Patch: Add Printk to pci.c
  • From: Alison Schofield <alison.schofield@xxxxxxxxx>
• [PATCH] First Patch: Add Printk to pci.c
  • From: Alaa Mohamed <eng.alaamohamedsoliman.am@xxxxxxxxx>
• Re: [PATCH 04/22] x86: Replace comments with C99 initializers
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH v3] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [PATCH 19/22 v2] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 00/22] Replace comments with C99 initializers
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH 20/22 v3] ray_cs: Improve card_status[]
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [PATCH 20/22 v2] ray_cs: Replace comments with C99 initializers
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 19/22 v2] wcn36xx: Improve readability of wcn36xx_caps_name
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 20/22 v2] ray_cs: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [PATCH 06/11] ath11k: add static window support for register access
  • From: Hamdi Issam <ih@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 19/22] wnc36xx: Replace comments with C99 initializers
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v2] ath9k: initialize arrays at compile time
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v2] ath9k: initialize arrays at compile time
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2] ath9k: initialize arrays at compile time
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 00/22] Replace comments with C99 initializers
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2] ath9k: initialize arrays at compile time
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 01/22] orion5x: Replace comments with C99 initializers
  • From: Segher Boessenkool <segher@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/22] s3c: Replace comments with C99 initializers
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Bug 215715 - PCI device (iwlwifi) is not working due to PCI power state change issues
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: [PATCH 01/22] orion5x: Replace comments with C99 initializers
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH v2] ath9k: initialize arrays at compile time
  • From: trix@xxxxxxxxxx
• Re: [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 00/22] Replace comments with C99 initializers
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2] carl9170: tx: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• Re: [PATCH] carl9170: tx: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• RE: [PATCH 21/22] rtw89: Replace comments with C99 initializers
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH v2] carl9170: tx: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• Re: [PATCH 20/22] wireless: Replace comments with C99 initializers
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [PATCH 00/22] Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [PATCH v2] ath11k: store and send country code to firmware after recovery
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v3 12/12] ath11k: Add support for WCN6750 device
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 11/12] ath11k: Update WBM idle ring HP after FW mode on
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 10/12] ath11k: WMI changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 07/12] ath11k: HAL changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 08/12] ath11k: Datapath changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 09/12] ath11k: Do not put HW in DBS mode for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 05/12] ath11k: Fetch device information via QMI for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 03/12] ath11k: Add bus params for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 04/12] ath11k: Add register access logic for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 06/12] ath11k: Add QMI changes for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v3 02/12] ath11k: Add HW params for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 00/12] add support for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: claim include/uapi/linux/wireless.h
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/22] Replace comments with C99 initializers
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 21/22] rtw89: Replace comments with C99 initializers
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [RFC] mac80211: prepare sta handling for MLO support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• RE: [RFC] mac80211: prepare sta handling for MLO support
  • From: "Sriram R (QUIC)" <quic_srirrama@xxxxxxxxxxx>
• RE: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: fw: Replace zero-length arrays with flexible-array members
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] wireless-regdb: Update regulatory rules for Australia (AU)
  • From: Richard Huynh <voxlympha@xxxxxxxxx>
• [PATCH v3] ath11k: Add support for targets without trustzone
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3] ath11k: Fix RX de-fragmentation issue on WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 10/12] ath11k: WMI changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 12/12] ath11k: Add support for WCN6750 device
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 11/12] ath11k: Update WBM idle ring HP after FW mode on
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 09/12] ath11k: Do not put HW in DBS mode for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 08/12] ath11k: Datapath changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 07/12] ath11k: HAL changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 06/12] ath11k: Add QMI changes for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 05/12] ath11k: Fetch device information via QMI for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 04/12] ath11k: Add register access logic for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 03/12] ath11k: Add bus params for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 02/12] ath11k: Add HW params for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 00/12] add support for WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 5/5] ath11k: Remove core PCI references from PCI common code
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 4/5] ath11k: Refactor MSI logic to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 2/5] ath11k: Refactor PCI code to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 3/5] ath11k: Choose MSI config based on HW revision
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 1/5] ath11k: PCI changes to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• [PATCH v3 0/5] Refactor PCI code to support WCN6750
  • From: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: mei: Replace zero-length array with flexible-array member
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: fw: Replace zero-length arrays with flexible-array members
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 1/2] ath10k: add support for MSDU IDs for USB devices
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2] ath11k: reduce the wait time of 11d scan and hw scan while add interface
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [PATCH] carl9170: tx: fix an incorrect use of list iterator
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ath10k: enable napi on RX path for usb
  • From: Erik Stromdahl <erik.stromdahl@xxxxxxxxx>
• [PATCH 1/2] ath10k: add support for MSDU IDs for USB devices
  • From: Erik Stromdahl <erik.stromdahl@xxxxxxxxx>
• RE: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] carl9170: main: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• [PATCH 00/22] Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [PATCH] carl9170: main: fix an incorrect use of list iterator
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH 09/22] gpio-winbond: Use C99 initializers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] carl9170: tx: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• [PATCH] carl9170: main: fix an incorrect use of list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• Re: [PATCH 11/22] rdmavt: Replace comments with C99 initializers
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• RE: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 02/22] s3c: Replace comments with C99 initializers
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 01/22] orion5x: Replace comments with C99 initializers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 21/22] rtw89: Replace comments with C99 initializers
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 01/22] orion5x: Replace comments with C99 initializers
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCH 04/22] x86: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 07/22] cm4000: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 03/22] ia64: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 06/22] idt77252: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 10/22] hfi1: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 09/22] gpio-winbond: Use C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 01/22] orion5x: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 02/22] s3c: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 08/22] i5100: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 05/22] acpica: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 22/22] pci: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 21/22] rtw89: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 19/22] wnc36xx: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 20/22] wireless: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 18/22] smsc: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 17/22] cxl: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 15/22] macintosh: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 14/22] mISDN: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 13/22] capi: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 12/22] alps: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• [PATCH 11/22] rdmavt: Replace comments with C99 initializers
  • From: Benjamin Stürz <benni@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH] ath9k: make is2ghz consistent in ar9003_eeprom
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re:MT7921 mt7921_pci_remove crashes
  • From: ThinerLogoer <logoerthiner1@xxxxxxx>
• Re: [PATCH v4] wcn36xx: Implement tx_rate reporting
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 1/3] nl80211: Add support for beacon tx mode
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH] ath9k: make is2ghz consistent in ar9003_eeprom
  • From: Wenli Looi <wlooi@xxxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: mei: Replace zero-length array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH][next] iwlwifi: fw: Replace zero-length arrays with flexible-array members
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH v4] wcn36xx: Implement tx_rate reporting
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• [PATCH v4] wcn36xx: Implement tx_rate reporting
  • From: Edmond Gagnon <egagnon@xxxxxxxxxxxx>
• RE: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• RE: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mt76: fix use-after-free issue in mt76_txq_schedule
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 4/8] mt76: dma: use kzalloc instead of devm_kzalloc for txwi
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 6/8] mt76: mt7915: accept rx frames with non-standard VHT MCS10-11
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 3/8] mt76: reduce tx queue lock hold time
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 1/8] mt76: mt7915: fix DBDC default band selection on MT7915D
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 5/8] mt76: dma: reduce lock contention in mt76_dma_tx_cleanup
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 7/8] mt76: mt7921: accept rx frames with non-standard VHT MCS10-11
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 8/8] mt76: fix use-after-free by removing a non-RCU wcid pointer
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 2/8] mt76: mt7915: rework hardware/phy initialization
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ipw2200: Fix permissions setted by DEVICE_ATTR
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v6 1/3] nl80211: Add support for beacon tx mode
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [no subject]
  • From: Unknown
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 04/12] iwlwifi: mvm: Passively scan non PSC channels only when requested so
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• [RFC PATCH] mac80211: mlme: Handle Puncturing information received from the AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC] mac80211: prepare sta handling for MLO support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/16] rtw89: refine PCI and MAC codes into function with attributes
  • From: Pkshih <pkshih@xxxxxxxxxxx>
• Re: [PATCH] ath11k: reduce the wait time of 11d scan and hw scan while add interface
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 00/16] rtw89: refine PCI and MAC codes into function with attributes
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: reduce the wait time of 11d scan and hw scan while add interface
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: Recall: [PATCHv3] mac80211: disable BSS color collision detection in case of no free colors
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2 wireless-next] mac80211: introduce BSS color collision detection
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/6] ath9k: make ATH_SREV macros more consistent
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH v5] ath11k: Add peer rhash table support
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 1/2] ath11k: add fallback board name without variant while searching board-2.bin
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH V3] b43legacy: Fix assigning negative value to unsigned variable
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• [PATCH V2] b43: Fix assigning negative value to unsigned variable
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• Re: [PATCH V2] wireless: broadcom: b43legacy: Fix assigning negative value to unsigned variable
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] wireless: broadcom: b43: Fix assigning negative value to unsigned variable
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] wireless: broadcom: b43legacy: Fix assigning negative error code to unsigned variable
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: MAINTAINERS: update Lorenzo's email address
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• [PATCH v4] mac80211: disable BSS color collision detection in case of no free colors
  • From: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx>
• [RFC] mac80211: prepare sta handling for MLO support
  • From: Sriram R <quic_srirrama@xxxxxxxxxxx>
• Re: [PATCH v6 1/3] nl80211: Add support for beacon tx mode
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• [PATCH] ipw2200: Fix permissions setted by DEVICE_ATTR
  • From: Meng Tang <tangmeng@xxxxxxxxxxxxx>
• Recall: [PATCHv3] mac80211: disable BSS color collision detection in case of no free colors
  • From: Rameshkumar Sundaram <ramess@xxxxxxxxxxxxxxxx>
• RE: [PATCHv3] mac80211: disable BSS color collision detection in case of no free colors
  • From: Rameshkumar Sundaram <ramess@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] nl80211: Add support for beacon tx mode
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• RE: [PATCH] rtlwifi: replace usage of found with dedicated list iterator variable
  • From: Pkshih <pkshih@xxxxxxxxxxx>
• [PATCH 14/16] rtw89: initialize NAV control
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 16/16] rtw89: update ptcl_init
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 13/16] rtw89: update scheduler setting
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 15/16] rtw89: update TMAC parameters
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 12/16] rtw89: 8852c: update security engine setting
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 11/16] rtw89: Turn on CR protection of CMAC
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 10/16] rtw89: add chip_ops::{enable,disable}_bb_rf to support v1 chip
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 09/16] rtw89: update STA scheduler parameters for v1 chip
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 08/16] rtw89: extend dmac_pre_init to support 8852C
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 04/16] rtw89: pci: add LTR setting for v1 chip
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 02/16] rtw89: pci: add pci attributes to configure operating mode
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 01/16] rtw89: pci: add register definition to rtw89_pci_info to generalize pci code
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 07/16] rtw89: pci: add L1 settings
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 06/16] rtw89: pci: add deglitch setting
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 05/16] rtw89: pci: set address info registers depends on chips
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 03/16] rtw89: pci: refine pci pre_init function
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH 00/16] rtw89: refine PCI and MAC codes into function with attributes
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v6 2/3] mac80211: Add support for beacon tx mode
  • From: Maharaja Kennadyrajan <quic_mkenna@xxxxxxxxxxx>
• [PATCH v6 3/3] ath11k: Add support for beacon tx mode
  • From: Maharaja Kennadyrajan <quic_mkenna@xxxxxxxxxxx>
• [PATCH v6 1/3] nl80211: Add support for beacon tx mode
  • From: Maharaja Kennadyrajan <quic_mkenna@xxxxxxxxxxx>
• [PATCH v6 0/3] Add support to configure beacon tx mode
  • From: Maharaja Kennadyrajan <quic_mkenna@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] rtl8xxxu: Fill up more TX information
  • From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
• [PATCH v3 0/2] rtl8xxxu: Fill up more TX information
  • From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
• [PATCH v3 1/2] rtl8xxxu: feed antenna information for cfg80211
  • From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
• [PATCH v3 2/2] rtl8xxxu: fill up txrate info for gen1 chips
  • From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
• [PATCH 2/2] linux-firmware: update firmware for MT7921 WiFi device
  • From: <sean.wang@xxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] nl80211: Add support for beacon tx mode
  • From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Halil Pasic <pasic@xxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [no subject]
  • From: Unknown
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH v2 2/4] cfg80211: validate RU puncturing bitmap
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] rtl8xxxu: fill up txrate info for gen1 chips
  • From: Reto Schneider <code@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] rtl8xxxu: Fill up more TX information
  • From: Reto Schneider <code@xxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V2] wireless: broadcom: b43legacy: Fix assigning negative value to unsigned variable
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Wenli Looi <wlooi@xxxxxxxxxxx>
• Re: [PATCH v3] wcn36xx: Implement tx_rate reporting
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH v3] wcn36xx: Implement tx_rate reporting
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: updated Lorenzo's email address
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2 2/4] cfg80211: validate RU puncturing bitmap
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: MT7921 Causing Kernel to Freeze after Reboot
  • From: Íñigo Huguet <ihuguet@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• [PATCH V2] wireless: broadcom: b43legacy: Fix assigning negative value to unsigned variable
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• [PATCH] wireless: broadcom: b43: Fix assigning negative value to unsigned variable
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• [PATCH] wireless: broadcom: b43legacy: Fix assigning negative error code to unsigned variable
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• [PATCH] rtlwifi: replace usage of found with dedicated list iterator variable
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH] iwlwifi: mvm: replace usage of found with dedicated list iterator variable
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• MT7921 mt7921_pci_remove crashes
  • From: ThinerLogoer <logoerthiner1@xxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2] ath11k: store and send country code to firmware after recovery
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• [PATCH] mac80211: consider Order bit to fill CCMP AAD
  • From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
• [PATCH v2 3/3] mac80211: EHT operation element support in AP mode
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 1/3] nl80211: retrieve EHT capabilities in AP mode
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 2/3] nl80211: retrieve EHT operation element in AP mode
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 1/2] cfg80211: support disabling EHT mode
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 2/2] mac80211: support disabling EHT mode
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• Re: [PATCH v3] wcn36xx: Implement tx_rate reporting
  • From: Benjamin Li <benl@xxxxxxxxxxxx>
• [PATCH v3] wcn36xx: Implement tx_rate reporting
  • From: Edmond Gagnon <egagnon@xxxxxxxxxxxx>
• Re: poor beacon/scan reliability with mac80211_hwsim
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2 1/4] nl80211: advertise RU puncturing support to userspace
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] nl80211: advertise RU puncturing support to userspace
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• Re: poor beacon/scan reliability with mac80211_hwsim
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: poor beacon/scan reliability with mac80211_hwsim
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• [PATCH] wireless-regdb: add missing spaces for US S1G rules
  • From: Seth Forshee <seth@xxxxxxxxxx>
• [PATCH v2 1/4] nl80211: advertise RU puncturing support to userspace
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 2/4] cfg80211: validate RU puncturing bitmap
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 4/4] mac80211: reset puncturing bitmap during width downgrade
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• [PATCH v2 3/4] nl80211: validate RU puncturing bitmap
  • From: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: poor beacon/scan reliability with mac80211_hwsim
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [syzbot] WARNING in ieee80211_mgd_probe_ap_send
  • From: syzbot <syzbot+07aa0ff28ef3cc7c3793@xxxxxxxxxxxxxxxxxxxxxxxxx>
• poor beacon/scan reliability with mac80211_hwsim
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: Avoid keeping power to SDIO card unless WOWL is used
  • From: Yann Gautier <yann.gautier@xxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: Avoid keeping power to SDIO card unless WOWL is used
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: iwlwifi: Beacon frame injection at higher modulation in kernel 5.13+?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: netconsole fail, iwlwifi, WARNING: at net/mac80211/tx.c:3638 ieee80211_tx_dequeue
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] brcmfmac: Avoid keeping power to SDIO card unless WOWL is used
  • From: Yann Gautier <yann.gautier@xxxxxxxxxxx>
• Re: [PATCH] ath9k: initialize arrays at compile time
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: Intel AX200 Not Working in 5.15+
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: adjust the replace_state of ieee80211_find_chanctx()
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] ath11k: add read variant from SMBIOS for download board data
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: store and send country code to firmware after recovery
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: Advertise PLATFORM_CAP_PCIE_GLOBAL_RESET in qmi msg
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v8 1/4] ath11k: add support for device recovery for QCA6390/WCN6855
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 1/3] ath11k: remove unused ATH11K_BD_IE_BOARD_EXT
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 2/2] ath11k: add read variant from SMBIOS for download board data
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• Re: [PATCH] ath11k: acquire ab->base_lock in unassign when finding the peer by addr
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 2/2] ath11k: add read variant from SMBIOS for download board data
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2] brcmfmac: Avoid keeping power to SDIO card unless WOWL is used
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] brcmfmac: Avoid keeping power to SDIO card unless WOWL is used
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PULL] ath11k firmware 20211223
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [RFC PATCH] mwifiex: Select firmware based on strapping
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [REGRESSION] Recent swiotlb DMA_FROM_DEVICE fixes break ath9k-based AP
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Don't fail if PPAG isn't supported
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Don't fail if PPAG isn't supported
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] iwlwifi: mvm: Don't fail if PPAG isn't supported
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH] iwlwifi: mvm: Don't fail if PPAG isn't supported
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/2] mac80211: add support to configure 6GHz non-ht duplicate transmission
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] mac80211: add support to configure 6GHz non-ht duplicate transmission
  • From: "Rameshkumar Sundaram (QUIC)" <quic_ramess@xxxxxxxxxxx>
• [PATCH] ath11k: reduce the wait time of 11d scan and hw scan while add interface
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• Re: [PATCH net-next v5 12/13] net: wwan: t7xx: Device deep sleep lock/unlock
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: net-next: regression: patch "iwlwifi: acpi: move ppag code from mvm to fw/acpi" (e8e10a37c51c) breaks wifi
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [kbuild] Re: [PATCH wireless-next] mac80211: introduce BSS color collision detection
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• RE: RE: rtw89: unstable connection
  • From: Pkshih <pkshih@xxxxxxxxxxx>
• Aw: RE: rtw89: unstable connection
  • From: Stefan K <Shadow_7@xxxxxxx>
• RE: rtw89: unstable connection
  • From: Pkshih <pkshih@xxxxxxxxxxx>
• Re: [RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [kbuild] Re: [PATCH wireless-next] mac80211: introduce BSS color collision detection
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] ath11k: store and send country code to firmware after recovery
  • From: Wen Gong <quic_wgong@xxxxxxxxxxx>
• Re: rtw89: unstable connection
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• [PATCH v2] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
  • From: Niels Dossche <dossche.niels@xxxxxxxxx>
• Re: [PATCH RFT] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
  • From: Niels Dossche <dossche.niels@xxxxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [RFC PATCH] mwifiex: Select firmware based on strapping
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH RFT] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Wenli Looi <wlooi@xxxxxxxxxxx>
• Re: net-next: regression: patch "iwlwifi: acpi: move ppag code from mvm to fw/acpi" (e8e10a37c51c) breaks wifi
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: rtw89: unstable connection
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• [PATCH v4 3/3] ath11k: Add ROC support for wide band scan
  • From: P Praneesh <quic_ppranees@xxxxxxxxxxx>
• [PATCH v4 1/3] nl80211: Extended ROC support for 40-80 MHz bandwidth
  • From: P Praneesh <quic_ppranees@xxxxxxxxxxx>
• [PATCH v4 2/3] ath11k: Refactor update channel list function
  • From: P Praneesh <quic_ppranees@xxxxxxxxxxx>
• [PATCH v4 0/3] mac80211: Add extended ROC support for 40-80 MHz bandwidth
  • From: P Praneesh <quic_ppranees@xxxxxxxxxxx>
• Re: [BUG] deadlock in nl80211_vendor_cmd
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• [RFC PATCH] mwifiex: Select firmware based on strapping
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH 6/6] ath9k: add functions to get paprd rate mask
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 5/6] ath9k: refactor ar9003_hw_spur_mitigate_ofdm
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 3/6] ath9k: use AR9300_MAX_CHAINS when appropriate
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 2/6] ath9k: split set11nRateFlags and set11nChainSel
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 1/6] ath9k: make ATH_SREV macros more consistent
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 4/6] ath9k: fix ar9003_get_eepmisc
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH 0/4] fix typos: "to short" -> "too short"
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] ath9k: initialize arrays at compile time
  • From: Toke Høiland-Jørgensen <toke@xxxxxxx>
• Re: [PATCH] ath11k: Advertise PLATFORM_CAP_PCIE_GLOBAL_RESET in qmi msg
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [RFC PATCH 03/10] brcmfmac: sdio: update to new MMC API for resetting cards
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [RFC PATCH 05/10] wlcore: sdio: update to new MMC API for resetting cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• rtw89: unstable connection
  • From: Stefan K <shadow_7@xxxxxxx>
• [RFC PATCH 02/10] ath10k: sdio: update to new MMC API for resetting cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 04/10] mwifiex: sdio: update to new MMC API for resetting cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 03/10] brcmfmac: sdio: update to new MMC API for resetting cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ath11k: acquire ab->base_lock in unassign when finding the peer by addr
  • From: Niels Dossche <dossche.niels@xxxxxxxxx>
• [RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• RE: [PATCH v2] ath11k: Add support for SAR
  • From: <Daniel.Shen@xxxxxxxxxxxx>
• Re: [PATCH v8 1/4] ath11k: add support for device recovery for QCA6390/WCN6855
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 0/3] ath11k: add support muti-type regdb data for WCN6855
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v1] ath11k: change fw build id format in driver init log
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: Refactor the peer delete
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] net: wireless: ath10k: Use of_device_get_match_data() helper
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 2/2] ath10k: Trigger sta disconnect on hardware restart
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: acquire ab->base_lock in unassign when finding the peer by addr
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v6 2/2] ath11k: add read variant from SMBIOS for download board data
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH wireless-next] mac80211: introduce BSS color collision detection
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v6 0/2] ath11k: add handler for board-2.bin without variant and read SMBIOS
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath11k: Add support for SAR
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: add support to configure 6GHz non-ht duplicate transmission
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] mISDN: fix typo "frame to short" -> "frame too short"
  • From: Tong Zhang <ztong0001@xxxxxxxxx>
• [PATCH 3/4] i825xx: fix typo "Frame to short" -> "Frame too short"
  • From: Tong Zhang <ztong0001@xxxxxxxxx>
• [PATCH 2/4] s390/ctcm: fix typo "length to short" -> "length too short"
  • From: Tong Zhang <ztong0001@xxxxxxxxx>
• [PATCH 1/4] ar5523: fix typo "to short" -> "too short"
  • From: Tong Zhang <ztong0001@xxxxxxxxx>
• [PATCH 0/4] fix typos: "to short" -> "too short"
  • From: Tong Zhang <ztong0001@xxxxxxxxx>
• [PATCH v2 2/2] ath11k: add support to configure 6GHz non-ht duplicate transmission
  • From: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx>
• [PATCH v2 1/2] mac80211: add support to configure 6GHz non-ht duplicate transmission
  • From: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx>
• [PATCH v2 0/2] Add support to configure 6GHz non-ht duplicate transmission
  • From: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx>
• RE: [PATCH 1/2] mac80211: add support to configure 6GHz non-ht duplicate transmission
  • From: "Rameshkumar Sundaram (QUIC)" <quic_ramess@xxxxxxxxxxx>
• RE: [PATCH] ath11k: Add support for SAR
  • From: "Baochen Qiang (QUIC)" <quic_bqiang@xxxxxxxxxxx>
• [PATCH v2] ath11k: Add support for SAR
  • From: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
• An announcement for kernel-global workqueue users.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/6] ath9k: suggested improvements and bugfixes
  • From: Wenli Looi <wlooi@xxxxxxxxxxx>
• [PATCH 3/6] ath9k: use AR9300_MAX_CHAINS when appropriate
  • From: Wenli Looi <wlooi@xxxxxxxxxxx>