From: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
checkpatch warns:
drivers/net/wireless/ath/ath10k/mac.c:2696: line length of 92 exceeds 90 columns
drivers/net/wireless/ath/ath10k/mac.c:6942: line length of 94 exceeds 90 columns
drivers/net/wireless/ath/ath10k/mac.c:6948: line length of 91 exceeds 90 columns
These were introduced by commit 046d2e7c50e3 ("mac80211: prepare sta handling
for MLO support").
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 06a51a48c1d9..3570a5895ea8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2692,8 +2692,10 @@ static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta)
static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar,
struct ieee80211_sta *sta)
{
+ struct ieee80211_sta_vht_cap *vht_cap = &sta->deflink.vht_cap;
+
if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_160) {
- switch (sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
+ switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
return MODE_11AC_VHT160;
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
@@ -6926,6 +6928,9 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
struct ieee80211_sta *sta,
u32 rate_ctrl_flag, u8 nss)
{
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap;
+ struct ieee80211_sta_vht_cap *vht_cap = &sta->deflink.vht_cap;
+
if (nss > sta->deflink.rx_nss) {
ath10k_warn(ar, "Invalid nss field, configured %u limit %u\n",
nss, sta->deflink.rx_nss);
@@ -6933,19 +6938,19 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
}
if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_VHT) {
- if (!sta->deflink.vht_cap.vht_supported) {
+ if (!vht_cap->vht_supported) {
ath10k_warn(ar, "Invalid VHT rate for sta %pM\n",
sta->addr);
return -EINVAL;
}
} else if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_HT) {
- if (!sta->deflink.ht_cap.ht_supported || sta->deflink.vht_cap.vht_supported) {
+ if (!ht_cap->ht_supported || vht_cap->vht_supported) {
ath10k_warn(ar, "Invalid HT rate for sta %pM\n",
sta->addr);
return -EINVAL;
}
} else {
- if (sta->deflink.ht_cap.ht_supported || sta->deflink.vht_cap.vht_supported)
+ if (ht_cap->ht_supported || vht_cap->vht_supported)
return -EINVAL;
}
--
2.30.2
