Robert Marko <robimarko@xxxxxxxxx> wrote: > Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the > BDF-s to be extracted from the device storage instead of shipping packaged > API 2 BDF-s. > > This is required as MikroTik has started shipping boards that require BDF-s > to be updated, as otherwise their WLAN performance really suffers. > This is however impossible as the devices that require this are release > under the same revision and its not possible to differentiate them from > devices using the older BDF-s. > > In OpenWrt we are extracting the calibration data during runtime and we are > able to extract the BDF-s in the same manner, however we cannot package the > BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on > the fly. > This is an issue as the ath10k driver explicitly looks only for the > board.bin file and not for something like board-bus-device.bin like it does > for pre-cal data. > Due to this we have no way of providing correct BDF-s on the fly, so lets > extend the ath10k driver to first look for BDF-s in the > board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin > If that fails, look for the default board file name as defined previously. > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx> > Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx> Patch applied to ath-next branch of ath.git, thanks. f2a7064a78b2 ath10k: support bus and device specific API 1 BDF selection -- https://patchwork.kernel.org/project/linux-wireless/patch/20211009221711.2315352-1-robimarko@xxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
