On 17/05/2022 17:11:05+0200, Rafael J. Wysocki wrote:
> On Thu, May 5, 2022 at 3:58 AM Zhang Rui <rui.zhang@xxxxxxxxx> wrote:
> >
> > On some Intel client platforms like SKL/KBL/CNL/CML, there is a
> > PCH thermal sensor that monitors the PCH temperature and blocks the system
> > from entering S0ix in case it overheats.
> >
> > Commit ef63b043ac86 ("thermal: intel: pch: fix S0ix failure due to PCH
> > temperature above threshold") introduces a delay loop to cool the
> > temperature down for this purpose.
> >
> > However, in practice, we found that the time it takes to cool the PCH down
> > below threshold highly depends on the initial PCH temperature when the
> > delay starts, as well as the ambient temperature.
> >
> > For example, on a Dell XPS 9360 laptop, the problem can be triggered
> > 1. when it is suspended with heavy workload running.
> > or
> > 2. when it is moved from New Hampshire to Florida.
> >
> > In these cases, the 1 second delay is not sufficient. As a result, the
> > system stays in a shallower power state like PCx instead of S0ix, and
> > drains the battery power, without user' notice.
> >
> > In this patch series, we first fix the problem in patch 1/7 ~ 3/7, by
> > 1. expand the default overall cooling delay timeout to 60 seconds.
> > 2. make sure the temperature is below threshold rather than equal to it.
> > 3. move the delay to .suspend_noirq phase instead, in order to
> > a) do the cooling when the system is in a more quiescent state
> > b) be aware of wakeup events during the long delay, because some wakeup
> > events (ACPI Power button Press, USB mouse, etc) become valid only
> > in .suspend_noirq phase and later.
> >
> > However, this potential long delay introduces a problem to our suspend
> > stress automation test, because the delay makes it hard to predict how
> > much time it takes to suspend the system.
> > As we want to do as much suspend iterations as possible in limited time,
> > setting a 60+ seconds rtc alarm for suspend which usually takes shorter
> > than 1 second is far beyond overkill.
> >
> > Thus, in patch 4/7 ~ 7/7, a rtc driver hook is introduced, which cancels
> > the armed rtc alarm in the beginning of suspend and then rearm the rtc
> > alarm with a short interval (say, 2 second) right before system suspended.
> >
> > By running
> > # echo 2 > /sys/module/rtc_cmos/parameters/rtc_wake_override_sec
> > before suspend, the system can be resumed by RTC alarm right after it is
> > suspended, no matter how much time the suspend really takes.
> >
> > This patch series has been tested on the same Dell XPS 9360 laptop and
> > S0ix is 100% achieved across 1000+ s2idle iterations.
>
> Overall, the first three patches in the series can go in without the
> rest, so let's put them into a separate series.
>
> Patch [4/7] doesn't depend on the first three ones, so it can go in by itself.
>
> Patch [5/7] is to be dropped anyway as per the earlier discussion.
>
> Patch [6/7] is only needed to apply patch [7/7] which is controversial.
>
> I think that we can drop or defer patches [6-7/7] for now.
I don't think 7/7 is really useful in the upstream kernel, I don't plan
to apply it
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
