Add remain on channel support, it is needed in several
scenarios such as Passpoint etc.
Currently this is supported by QCA6390, WCN6855, IPQ8074,
IPQ6018 and QCN9074.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/core.c | 1 +
drivers/net/wireless/ath/ath11k/mac.c | 115 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/wmi.c | 4 +
3 files changed, 120 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 01e1d494b527..412bec8f1daf 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1623,6 +1623,7 @@ static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
complete(&ar->completed_11d_scan);
complete(&ar->scan.started);
complete(&ar->scan.completed);
+ complete(&ar->scan.on_channel);
complete(&ar->peer_assoc_done);
complete(&ar->peer_delete_done);
complete(&ar->install_key_done);
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1957e1713548..6e6b8562b481 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -8345,6 +8345,118 @@ static int ath11k_mac_op_set_bios_sar_specs(struct ieee80211_hw *hw,
return ret;
}
+static int ath11k_mac_op_cancel_remain_on_channel(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath11k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.roc_notify = false;
+ spin_unlock_bh(&ar->data_lock);
+
+ ath11k_scan_abort(ar);
+
+ mutex_unlock(&ar->conf_mutex);
+
+ cancel_delayed_work_sync(&ar->scan.timeout);
+
+ return 0;
+}
+
+static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_channel *chan,
+ int duration,
+ enum ieee80211_roc_type type)
+{
+ struct ath11k *ar = hw->priv;
+ struct ath11k_vif *arvif = (void *)vif->drv_priv;
+ struct scan_req_params arg;
+ int ret;
+ u32 scan_time_msec;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ switch (ar->scan.state) {
+ case ATH11K_SCAN_IDLE:
+ reinit_completion(&ar->scan.started);
+ reinit_completion(&ar->scan.completed);
+ reinit_completion(&ar->scan.on_channel);
+ ar->scan.state = ATH11K_SCAN_STARTING;
+ ar->scan.is_roc = true;
+ ar->scan.vdev_id = arvif->vdev_id;
+ ar->scan.roc_freq = chan->center_freq;
+ ar->scan.roc_notify = true;
+ ret = 0;
+ break;
+ case ATH11K_SCAN_STARTING:
+ case ATH11K_SCAN_RUNNING:
+ case ATH11K_SCAN_ABORTING:
+ ret = -EBUSY;
+ break;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ if (ret)
+ goto exit;
+
+ scan_time_msec = ar->hw->wiphy->max_remain_on_channel_duration * 2;
+
+ memset(&arg, 0, sizeof(arg));
+ ath11k_wmi_start_scan_init(ar, &arg);
+ arg.num_chan = 1;
+ arg.chan_list = kcalloc(arg.num_chan, sizeof(*arg.chan_list),
+ GFP_KERNEL);
+ if (!arg.chan_list) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ arg.vdev_id = arvif->vdev_id;
+ arg.scan_id = ATH11K_SCAN_ID;
+ arg.chan_list[0] = chan->center_freq;
+ arg.dwell_time_active = scan_time_msec;
+ arg.dwell_time_passive = scan_time_msec;
+ arg.max_scan_time = scan_time_msec;
+ arg.scan_flags |= WMI_SCAN_FLAG_PASSIVE;
+ arg.scan_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+ arg.burst_duration = duration;
+
+ ret = ath11k_start_scan(ar, &arg);
+ if (ret) {
+ ath11k_warn(ar->ab, "failed to start roc scan: %d\n", ret);
+
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.state = ATH11K_SCAN_IDLE;
+ spin_unlock_bh(&ar->data_lock);
+ goto free_chan_list;
+ }
+
+ ret = wait_for_completion_timeout(&ar->scan.on_channel, 3 * HZ);
+ if (ret == 0) {
+ ath11k_warn(ar->ab, "failed to switch to channel for roc scan\n");
+ ret = ath11k_scan_stop(ar);
+ if (ret)
+ ath11k_warn(ar->ab, "failed to stop scan: %d\n", ret);
+ ret = -ETIMEDOUT;
+ goto free_chan_list;
+ }
+
+ ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
+ msecs_to_jiffies(duration));
+
+ ret = 0;
+
+free_chan_list:
+ kfree(arg.chan_list);
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
static const struct ieee80211_ops ath11k_ops = {
.tx = ath11k_mac_op_tx,
.start = ath11k_mac_op_start,
@@ -8397,6 +8509,8 @@ static const struct ieee80211_ops ath11k_ops = {
#endif
.set_sar_specs = ath11k_mac_op_set_bios_sar_specs,
+ .remain_on_channel = ath11k_mac_op_remain_on_channel,
+ .cancel_remain_on_channel = ath11k_mac_op_cancel_remain_on_channel,
};
static void ath11k_mac_update_ch_list(struct ath11k *ar,
@@ -8986,6 +9100,7 @@ int ath11k_mac_allocate(struct ath11k_base *ab)
init_completion(&ar->bss_survey_done);
init_completion(&ar->scan.started);
init_completion(&ar->scan.completed);
+ init_completion(&ar->scan.on_channel);
init_completion(&ar->thermal.wmi_sync);
INIT_DELAYED_WORK(&ar->scan.timeout, ath11k_scan_timeout_work);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 1410114d1d5c..e99dede0ab55 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5264,6 +5264,8 @@ static void ath11k_wmi_event_scan_started(struct ath11k *ar)
break;
case ATH11K_SCAN_STARTING:
ar->scan.state = ATH11K_SCAN_RUNNING;
+ if (ar->scan.is_roc)
+ ieee80211_ready_on_channel(ar->hw);
complete(&ar->scan.started);
break;
}
@@ -5346,6 +5348,8 @@ static void ath11k_wmi_event_scan_foreign_chan(struct ath11k *ar, u32 freq)
case ATH11K_SCAN_RUNNING:
case ATH11K_SCAN_ABORTING:
ar->scan_channel = ieee80211_get_channel(ar->hw->wiphy, freq);
+ if (ar->scan.is_roc && ar->scan.roc_freq == freq)
+ complete(&ar->scan.on_channel);
break;
}
}
--
2.25.1
