Linux Watchdog

• Thread Index

• [PATCH 11/18] dt-bindings: gpio: Add bindings for sl28cpld GPIO controller
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 10/18] pwm: add support for sl28cpld PWM controller
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 16/18] arm64: dts: freescale: sl28: map GPIOs to input events
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 15/18] arm64: dts: freescale: sl28: enable sl28cpld
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 13/18] dt-bindings: hwmon: Add bindings for sl28cpld hardware monitoring
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 09/18] dt-bindings: pwm: Add bindings for sl28cpld PWM controller
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 08/18] watchdog: add support for sl28cpld watchdog
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 18/18] arm64: dts: freescale: sl28: enable fan support
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 17/18] arm64: dts: freescale: sl28: enable LED support
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 14/18] hwmon: add support for the sl28cpld hardware monitoring controller
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 12/18] gpio: add support for the sl28cpld GPIO controller
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 05/18] mfd: Add support for Kontron sl28cpld management controller
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Peng Fan <peng.fan@xxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 5/7] watchdog: dw_wdt: Support devices with asynch clocks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/7] watchdog: dw_wdt: Support devices with non-fixed TOP values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH] watchdog: ziirave_wdt: change name to be more specific
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: ziirave_wdt: change name to be more specific
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: orion: use 0 for unset heartbeat
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: orion: use 0 for unset heartbeat
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCHv4 2/4] watchdog: reset last_hw_keepalive time at start
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv4 1/4] dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv4 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv4 4/4] arm64: dts: ti: k3-j721e-main: Add MAIN domain watchdog entries
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv4 0/4] watchdog: add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCHv2 1/4] dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v5] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2 1/4] dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: iTCO_wdt: Export vendorsupport
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCH 0/7] watchdog: dw_wdt: Take Baikal-T1 DW WDT peculiarities into account
  • From: Sergey Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Peng Fan <peng.fan@xxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V3 6/7] watchdog: add COMPILE_TEST support for IMX_SC_WDT
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 7/7] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 5/7] input: keyboard: imx_sc_key: Fix build warning for !CONFIG_IMX_SCU case
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 3/7] rtc: add COMPILE_TEST support for i.MX SC RTC
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 4/7] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V2 6/7] watchdog: add COMPILE_TEST support for IMX_SC_WDT
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 7/7] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 5/7] input: keyboard: imx_sc_key: Fix build warning for !CONFIG_IMX_SCU case
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 4/7] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 3/7] rtc: add COMPILE_TEST support for i.MX SC RTC
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 2/7] firmware: imx: add COMPILE_TEST support
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 5/5] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 5/5] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 2/5] rtc: add COMPILE_TEST support for i.MX SC RTC
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 4/5] watchdog: add COMPILE_TEST support for IMX_SC_WDT
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 1/5] firmware: imx: add COMPILE_TEST support
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH 3/7] watchdog: watchdog_dev: Use generic msec-per-sec macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: watchdog: dw-wdt: Replace legacy bindings file with YAML-based one
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/7] watchdog: dw_wdt: Add pre-timeouts support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 7/7] watchdog: dw_wdt: Add DebugFS files
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/7] watchdog: watchdog_dev: Use generic msec-per-sec macro
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] watchdog: dw_wdt: Support devices with non-fixed TOP values
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/7] watchdog: dw_wdt: Support devices with asynch clocks
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/7] watchdog: dw_wdt: Add pre-timeouts support
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] watchdog: dw_wdt: Add DebugFS files
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: watchdog: dw-wdt: Replace legacy bindings file with YAML-based one
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/7] watchdog: dw_wdt: Take Baikal-T1 DW WDT peculiarities into account
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property
  • From: <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.5 08/67] ACPI: watchdog: Set default timeout in probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 08/58] ACPI: watchdog: Set default timeout in probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCHv3 3/4] watchdog: Add K3 RTI watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-binding: watchdog: add bootstatus reset type documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] watchdog: npcm: remove whitespaces
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v5] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCHv2 3/4] watchdog: Add K3 RTI watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 3/3] watchdog: npcm: remove whitespaces
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2 3/4] watchdog: Add K3 RTI watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCHv2 2/4] watchdog: reset last_hw_keepalive time at start
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/3] dt-binding: watchdog: add bootstatus reset type documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 3/3] watchdog: npcm: remove whitespaces
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 0/3] watchdog: npcm: add last bootstatus support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 2/3] watchdog: npcm: sets card ext1 and ext2 bootstatus during probe
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v4] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• [PATCH AUTOSEL 5.5 37/66] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 32/58] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 21/32] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 15/22] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 11/13] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 10/11] watchdog: da9062: do not ping the hw during stop()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCHv2 2/4] watchdog: reset last_hw_keepalive time at start
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 4/4] arm64: dts: ti: k3-j721e-main: Add MAIN domain watchdog entries
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 1/4] dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 0/4] watchdog: add TI K3 SoC watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] watchdog: sbsa_gwdt: disable watchdog when system panic was trigged by signal WS0
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: add support for resetting keepalive timers at start
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: wm831x_wdt: Remove GPIO handling
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: sbsa_gwdt: disable watchdog when system panic was trigged by signal WS0
  • From: luanshi <zhangliguang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog: npcm: sets card ext1 and ext2 bootstatus during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-binding: watchdog: add restart priority documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog: npcm: sets card ext1 and ext2 bootstatus during probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 4/4] watchdog: npcm: sets card ext1 and ext2 bootstatus during probe
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 3/4] dt-binding: watchdog: add bootstatus reset type documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 2/4] watchdog: npcm: add restart priority support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/4] dt-binding: watchdog: add restart priority documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 0/4] watchdog: npcm: support new capabilities
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v1 1/4] dt-binding: watchdog: add restart priority documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: wm831x_wdt: Remove GPIO handling
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: wm831x_wdt: Remove GPIO handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: Add K3 RTI watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: add support for resetting keepalive timers at start
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: add support for resetting keepalive timers at start
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/4] arm64: dts: ti: k3-j721e-main: Add MAIN domain watchdog entries
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/4] watchdog: Add K3 RTI watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/4] dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/4] watchdog: add TI K3 SoC watchdog support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v4] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: Add mt8173,smc-wdt watchdog
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: Add mt8173,smc-wdt watchdog
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: iTCO_wdt: Export vendorsupport
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: iTCO_wdt: Export vendorsupport
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: iTCO_wdt: Export vendorsupport
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: Add mt8173,smc-wdt watchdog
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i801: Do not add ICH_RES_IO_SMI if PMC device is not present
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i801: Do not add ICH_RES_IO_SMI if PMC device is not present
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i801: Do not add ICH_RES_IO_SMI if PMC device is not present
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/3] watchdog: iTCO_wdt: Export vendorsupport
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: i801: Do not add ICH_RES_IO_SMI if PMC device is not present
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: imx2_wdt: Drop .remove callback
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• RE: [PATCH 3/3] watchdog: imx2_wdt: Remove unused include of init.h
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCHv3] watchdog: Add stop_on_reboot parameter to control reboot policy
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: imx2_wdt: Remove unused include of init.h
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCHv3] watchdog: Add stop_on_reboot parameter to control reboot policy
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• Re: [PATCHv2] watchdog: Add stop_on_reboot parameter to control reboot policy
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• RE: [PATCH 3/3] watchdog: imx2_wdt: Remove unused include of init.h
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCHv2] watchdog: Add stop_on_reboot parameter to control reboot policy
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: imx2_wdt: Remove unused include of init.h
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: imx7ulp: Remove unused include of init.h
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: imx_sc_wdt: Remove unused includes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: Add mt8173,smc-wdt watchdog
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.6 Fixes
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v5.6 Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: Add new mt8173_smc_wdt watchdog driver
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: watchdog: Add mt8173,smc-wdt watchdog
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• [PATCH v2 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls.
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• [PATCH 2/3] watchdog: imx7ulp: Remove unused include of init.h
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 3/3] watchdog: imx2_wdt: Remove unused include of init.h
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 1/3] watchdog: imx_sc_wdt: Remove unused includes
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use irq flags from firmware
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use irq flags from firmware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use irq flags from firmware
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] watchdog: qcom: Use irq flags from firmware
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH -next] watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Evan Benn <evanbenn@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.5 113/542] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 114/542] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 097/459] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCHv2] watchdog: Add stop_on_reboot parameter to control reboot policy
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 098/459] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH RESEND] watchdog: wm831x: Use GPIO descriptor
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/2] watchdog: Add new arm_smc_wdt watchdog driver
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: watchdog: Add arm,smc-wdt watchdog arm,smc-wdt compatible
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• [PATCH 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls.
  • From: Evan Benn <evanbenn@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] ACPI / watchdog: Fix two reported issues
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Check WDOG_STOP_ON_REBOOT in reboot notifier
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Check WDOG_STOP_ON_REBOOT in reboot notifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] watchdog/uapi: Add WDIOS_{RUN,STOP}_ON_REBOOT
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [PATCH 1/2] watchdog: Check WDOG_STOP_ON_REBOOT in reboot notifier
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [PATCH 0/2] watchdog: Provide user control over WDOG_STOP_ON_REBOOT
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• RE: [PATCH v2 1/3] ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  • From: "Moore, Robert" <robert.moore@xxxxxxxxx>
• Re: [PATCH v2 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ACPI / watchdog: Set default timeout in probe
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] ACPI / watchdog: Set default timeout in probe
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] ACPI / watchdog: Fix two reported issues
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ACPI / watchdog: Set default timeout in probe
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ACPICA: Introduce ACPI_ACCESS_BIT_WIDTH() macro
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ACPI / watchdog: Set default timeout in probe
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/3] ACPICA: Introduce ACPI_ACCESS_BIT_WIDTH() macro
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/3] ACPI / watchdog: Fix gas->access_width usage
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/3] ACPICA: Introduce ACPI_ACCESS_BIT_WIDTH() macro
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/3] ACPI / watchdog: Set default timeout in probe
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] watchdog: pm8916_wdt: Add system sleep callbacks
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: pm8916_wdt: Add system sleep callbacks
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH RESEND] watchdog: wm831x: Use GPIO descriptor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: da9062: fix power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: wdat_wdt: access width inconsistency
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH RESEND] watchdog: wm831x: Use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• wdat_wdt: access width inconsistency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] watchdog: da9062: Add dependency on I2C
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.6 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] watchdog: da9062: fix power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH] watchdog: da9062: fix power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Explicit disable da9062 watchdog during suspend
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Documentation: watchdog: qcom-wdt: Remove deprecated compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v5.6 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Forcing non-ACPI watchdog driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Forcing non-ACPI watchdog driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] watchdog: qcom-wdt: disable pretimeout on timer platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: qcom-wdt: disable pretimeout on timer platform
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] watchdog: qcom-wdt: disable pretimeout on timer platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: qcom-wdt: disable pretimeout on timer platform
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: R: R: [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• R: R: [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: <ansuelsmth@xxxxxxxxx>
• Re: R: [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• R: [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 3/3] Documentation: watchdog: qcom-wdt: add new no-pretimeout option
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] Documentation: watchdog: qcom-wdt: Remove deprecated compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] Documentation: watchdog: qcom-wdt: add new no-pretimeout option
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [PATCH 2/3] Documentation: watchdog: qcom-wdt: Remove deprecated compatible
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [PATCH -next] watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH -next] watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: linux-next: Tree for Jan 31 (drivers/watchdog/da9062_wdt.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert stpmic1 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: Best practice when probe fails on armed watchdog?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Best practice when probe fails on armed watchdog?
  • From: Ulrich Hecht <uli@xxxxxxxx>
• RE: [PATCH] watchdog: da9062: do not ping the hw during stop()
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: do not ping the hw during stop()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v12 4/4] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: watchdog: da9062: add suspend disable option
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: da9062: make restart handler atomic safe
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: it87_wdt: add IT8786 ID
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: it87_wdt: add IT8786 ID
  • From: Vincent Prince <vincent.prince.fr@xxxxxxxxx>
• [RFC 2/2] watchdog/uapi: Add WDIOS_{RUN,STOP}_ON_REBOOT
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [RFC 1/2] watchdog: Check WDOG_STOP_ON_REBOOT in reboot notifier
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [RFC 0/2] watchdog: Provide user control over WDOG_STOP_ON_REBOOT
  • From: Dmitry Safonov <dima@xxxxxxxxxx>
• [PATCH] watchdog: da9062: do not ping the hw during stop()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9062: make restart handler atomic safe
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/4] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v12 4/4] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 153/205] watchdog: sprd: Fix the incorrect pointer getting from driver data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 335/671] watchdog: rtd119x_wdt: Fix remove function
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 651/671] watchdog: sprd: Fix the incorrect pointer getting from driver data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/9] watchdog: of_xilinx_wdt: Add comment to spinlock
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 7/9] watchdog: of_xilinx_wdt: Add Versal support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/9] watchdog: of_xilinx_wdt: Used BIT macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/9] watchdog: of_xilinx_wdt: Used dev_dbg()
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 5/9] watchdog: of_xilinx_wdt: Introduce wdttype enum for identification
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 8/9] watchdog: of_xilinx_wdt: Wire setting up timeout via module parameter/DT
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 9/9] watchdog: of_xilinx_wdt: Skip printing pointer value
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 7/9] watchdog: of_xilinx_wdt: Add Versal support
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 4/9] watchdog: of_xilinx_wdt: Initialize watchdog via data structure
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 1/9] watchdog: of_xilinx_wdt: Add comment to spinlock
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 2/9] watchdog: of_xilinx_wdt: Used BIT macro
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH 0/9] watchdog: of_xilinx_wdt: Update on watchdog driver
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9062: make restart handler atomic safe
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9062: make restart handler atomic safe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: da9062: make restart handler atomic safe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v12 4/4] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v12 3/4] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v12 3/4] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v12 3/4] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH v12 0/4] ASoC: mt8183: fix audio playback slowly after playback
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH v12 4/4] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH v12 1/4] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH v12 2/4] dt-bindings: mediatek: mt2712: Add #reset-cells
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: make restart handler atomic safe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: watchdog: da9062: add suspend disable option
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/5] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: make restart handler atomic safe
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: make restart handler atomic safe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• RE: [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] dt-bindings: watchdog: da9062: add suspend disable option
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• RE: [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: a1: add secure watchdog controller
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v6 4/5] watchdog: add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v6 3/5] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v6 2/5] firmware: meson_sm: populate platform device based on the child node
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v6 0/5] add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v6 1/5] firmware: meson_sm: add new SMC ID support for accessing secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: make restart handler atomic safe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v11 1/3] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH] watchdog: da9062: make restart handler atomic safe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v11 1/3] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v11 3/3] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v11 2/3] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v11 1/3] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: fix UAF in reboot notifier handling in watchdog core code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v11 1/3] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v11 3/3] watchdog: mtk_wdt: mt2712: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v11 2/3] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v11 0/3] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• Re: [PATCH v10 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] watchdog: fix UAF in reboot notifier handling in watchdog core code
  • From: Vladis Dronov <vdronov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: mt8183: Add watchdog dt-binding
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 0/3] Explicit disable da9062 watchdog during suspend
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/3] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: watchdog: da9062: add suspend disable option
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/3] mfd: da9062: fix watchdog compatible string
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/3] Explicit disable da9062 watchdog during suspend
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v10 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: mt8183: Add watchdog dt-binding
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] amr64: dts: modify mt8183.dtsi
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: dw_wdt: ping watchdog to reset countdown before start
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: dw_wdt: ping watchdog to reset countdown before start
  • From: Jack Mitchell <ml@xxxxxxxxxxx>
• [PATCH] watchdog: dw_wdt: ping watchdog to reset countdown before start
  • From: Jack Mitchell <ml@xxxxxxxxxxx>
• [PATCH] watchdog: dw_wdt: ping watchdog to reset countdown before start
  • From: Jack Mitchell <ml@xxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.5 Fixes
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v5.5 Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• [PATCH v10 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v10 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v9 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v9 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH 1/2] [PATCH v8 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: cadence: Skip printing pointer value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] [PATCH v8 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] [PATCH v8 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH 2/2] [PATCH v8 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v8 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v7 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v7 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Yong Liang <yong.liang@xxxxxxxxxxxx>
• [PATCH RESEND] watchdog: max77620_wdt: fix potential build errors
  • From: David Engraf <david.engraf@xxxxxxxxx>
• Re: [PATCH] watchdog: cadence: Skip printing pointer value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: cadence: Skip printing pointer value
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77961 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77961 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] watchdog: add meson secure watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: rn5t618_wdt: fix module aliases
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: rn5t618_wdt: fix module aliases
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] watchdog: qcom: Use platform_get_irq_optional() for bark irq
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: mtx-1: Drop au1000.h header inclusion
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: mtx-1: Drop au1000.h header inclusion
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: a1: add secure watchdog controller
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v5 3/4] watchdog: add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v5 0/4] add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v5 1/4] firmware: meson_sm: add new SMC ID support for accessing secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH 0/2] watchdog: mtx-1: Relax build dependencies
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: mtx-1: Drop au1000.h header inclusion
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 0/2] watchdog: mtx-1: Relax build dependencies
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: mtx-1: Drop au1000.h header inclusion
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/2] watchdog: mtx-1: Relax build dependencies
  • From: Denis Efremov <efremov@xxxxxxxxx>
• [PATCH 1/2] watchdog: mtx-1: Drop au1000.h header inclusion
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 2/2] watchdog: Relax dependencies for CONFIG_WDT_MTX1
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 0/2] watchdog: mtx-1: Relax build dependencies
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v6 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 086/134] watchdog: prevent deferral of watchdogd wakeup on RT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 54/79] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 55/79] watchdog: Fix the race between the release of watchdog_core_data and cdev
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 37/58] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 087/134] watchdog: Fix the race between the release of watchdog_core_data and cdev
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 085/134] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 084/134] watchdog: imx7ulp: Fix reboot hang
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH 0/2] ASoC: mt8183: fix audio playback slowly after playback
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• [PATCH 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
  • From: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH v4 2/2] watchdog: add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: add meson secure watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Read device status through sysfs attributes for GPIO-controlled Watchdog.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Read device status through sysfs attributes for GPIO-controlled Watchdog.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: tqmx86_wdt: Fix build error
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH -next] watchdog: tqmx86_wdt: Fix build error
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v1 4/4] dt-binding: power: reset: Add documentation for MTK RGU (Reset Gernation Unit) reboot driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77961 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• RE: [PATCH] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: da9062: add power management ops
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.5 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v5.5 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: orion: fix platform_get_irq() complaints
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: orion: fix platform_get_irq() complaints
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH] watchdog: orion: fix platform_get_irq() complaints
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: da9062: add power management ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: da9062: add power management ops
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: max77620_wdt: fix potential build errors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: max77620_wdt: fix potential build errors
  • From: David Engraf <david.engraf@xxxxxxxxx>
• Re: [PATCH v1 2/4] watchdog: populate reboot mode node in toprgu node of MTK RGU (Reset Generation Unit)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 2/4] watchdog: populate reboot mode node in toprgu node of MTK RGU (Reset Generation Unit)
  • From: <freddy.hsin@xxxxxxxxxxxx>
• [PATCH v1 3/4] soc: mediatek: add reboot-mode header
  • From: <freddy.hsin@xxxxxxxxxxxx>
• [PATCH v1 1/4] power: reset: add reboot mode driver
  • From: <freddy.hsin@xxxxxxxxxxxx>
• [PATCH v1 4/4] dt-binding: power: reset: Add documentation for MTK RGU (Reset Gernation Unit) reboot driver
  • From: <freddy.hsin@xxxxxxxxxxxx>
• [PATCH v1 0/4] Support MTK reboot mode driver
  • From: <freddy.hsin@xxxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v4 1/2] firmware: meson_sm: add new SMC ID support for accessing secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• [PATCH v4 0/2] add meson secure watchdog driver
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v2.1] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2.1] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe Roullier <christophe.roullier@xxxxxx>
• Re: [Linux-stm32] [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe ROULLIER <christophe.roullier@xxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• Re: [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3] dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe Roullier <christophe.roullier@xxxxxx>
• Re: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <guenter@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe ROULLIER <christophe.roullier@xxxxxx>
• [PATCH v2] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe Roullier <christophe.roullier@xxxxxx>
• [PATCH 0/1] stm32_iwdg: set WDOG_HW_RUNNING at probe
  • From: Christophe Roullier <christophe.roullier@xxxxxx>
• [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• RE: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
  • From: "Wang, Peng 1. (NSB - CN/Hangzhou)" <peng.1.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Lennert Buytenhek <kernel@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] watchdog: Remove iop_wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: Remove iop_wdt
  • From: Laura Abbott <labbott@xxxxxxxxxx>
• Re: [External] Re: [PATCH] watchdog: omap: Fix early_enable to start watchdogd
  • From: Brandon Maier <brandon.maier@xxxxxxxxxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• [PATCH v5 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: omap: Fix early_enable to start watchdogd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: omap: Fix early_enable to start watchdogd
  • From: Brandon Maier <brandon.maier@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: omap: Fix early_enable to start watchdogd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: omap: Fix early_enable to start watchdogd
  • From: Brandon Maier <brandon.maier@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• Re: watchdog: how to enable?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• watchdog: how to enable?
  • From: Muni Sekhar <munisekharrms@xxxxxxxxx>
• [PATCH v4 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v4 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 038/209] watchdog: core: fix null pointer dereference when releasing cdev
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 039/209] watchdog: renesas_wdt: stop when unregistering
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 021/115] watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 041/209] watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 040/209] watchdog: sama5d4: fix timeout-sec usage
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v3 1/3] watchdog: sama5d4_wdt: cleanup the bit definitions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.4-rc7 Fixes
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v5.4-rc7 Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH 1/5] watchdog: imx7ulp: Fix reboot hang
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sprd: Fix the incorrect pointer getting from driver data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: sprd: Fix the incorrect pointer getting from driver data
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Cédric Le Goater <clg@xxxxxxxx>
• [PATCH] watchdog: aspeed: Fix clock behaviour for ast2600
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/5] watchdog: imx7ulp: Fix reboot hang
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: make nowayout sysfs file writable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: make nowayout sysfs file writable
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: make nowayout sysfs file writable
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] watchdog: make nowayout sysfs file writable
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: prevent deferral of watchdogd wakeup on RT
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: prevent deferral of watchdogd wakeup on RT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: prevent deferral of watchdogd wakeup on RT
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: make nowayout sysfs file writable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: make nowayout sysfs file writable
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] watchdog: imx7ulp: Fix reboot hang
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] watchdog: imx7ulp: Fix reboot hang
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 3/4] watchdog: add meson secure watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/5] watchdog: imx7ulp: Use definitions instead of magic values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/5] watchdog: imx7ulp: Remove inline annotations
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: imx7ulp: Remove unused structure member
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/5] watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] watchdog: imx7ulp: Fix reboot hang
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH v1] watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: watchdog: add new binding for meson secure watchdog
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1] watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  • From: Ferry Toth <fntoth@xxxxxxxxx>
• [PATCH 5/5] watchdog: imx7ulp: Use definitions instead of magic values
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 4/5] watchdog: imx7ulp: Remove inline annotations
  • From: Fabio Estevam <festevam@xxxxxxxxx>