The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantees the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver do. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start reset the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/watchdog/da9062_wdt.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index 77b6b5336067..0ad15d55071c 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -97,13 +97,6 @@ static int da9062_wdt_stop(struct watchdog_device *wdd)
struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
int ret;
- ret = da9062_reset_watchdog_timer(wdt);
- if (ret) {
- dev_err(wdt->hw->dev, "Failed to ping the watchdog (err = %d)\n",
- ret);
- return ret;
- }
-
ret = regmap_update_bits(wdt->hw->regmap,
DA9062AA_CONTROL_D,
DA9062AA_TWDSCALE_MASK,
--
2.20.1
